chevron_left chevron_right
-42%
F 65/250A - 60 HP three-phase standardized centrifugal electric pump
Flow rate up to 2600 l/min (156 m³/h). Head up to 95 m. 45 Kw (60 HP) motor.
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
We supply all spare parts on this product.
Description
Used for water supply, washing systems, pressurization, fire-fighting systems, irrigation, industry, water circulation in air conditioning systems, agriculture.
Installation must be carried out indoors or in any case protected from the elements.
Data sheet
- Power (Kw)
- 45
- Power (HP)
- 60
- Absorption at 400V (A)
- 79
- Suction mouth
- 3 "
- Delivery port
- 2 "1/2
- Body Pump
- Cast iron
- Impeller
- Cast iron
- Number of impellers
- 1
- Motor shaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- no
- Degree of protection
- IP 55
- Flow rate min. (l./min.)
- 400
- Max flow (l./min.)
- 2600
- Min head (m.)
- 68
- Max head (m.)
- 95
- Liquid temperature max. (° C)
- +90°C
- Height (cm)
- 45
- Width (cm)
- 84.7
- Weight kg)
- 219.3
- Guarantee
- 2
Models and performances F 65/250
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the F 65/250-80/200-80/250
Bearings
| Pump side motor bearing | 6312 ZZ-C3 |
| Opposite side engine bearing | 6212 ZZ-C3 |
Tree holding
| Type of seal | Single Mechanical Seal |
| Shrinkage DN1=450 DN2=350 | FN-40 NU |
| LP diameter | 40 |
| LP fixed ring | Graphite |
| LP rotating ring | Ceramic |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Cast iron GJL 200 EN 1561 |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | EN-AB 46100 aluminium |
| 6.1 - Engine cover | EN-AB 46100 aluminium |
| 7.0 - Lantern | Cast iron GJL 200 EN 1561 |
Compare with Similar Products
 F 65/250A - 60 HP three-phase standardized centrifugal electric pumpThis product Flow rate up to 2600 l/min (156 m³/h). Head up to 95 m. 45 Kw (60 HP) motor. |  O-15-150P - Fixed angle nozzle range 4.6 m 150 degreesFemale attachment. | |
|---|---|---|
| Power (Kw) | Power (Kw) 45 | Power (Kw) -- |
| Power (HP) | Power (HP) 60 | Power (HP) -- |
| Absorption at 400V (A) | Absorption at 400V (A) 79 | Absorption at 400V (A) -- |
| Suction mouth | Suction mouth 3 " | Suction mouth -- |
| Delivery port | Delivery port 2 "1/2 | Delivery port -- |
| Body Pump | Body Pump Cast iron | Body Pump -- |
| Impeller | Impeller Cast iron | Impeller -- |
| Number of impellers | Number of impellers 1 | Number of impellers -- |
| Motor shaft | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft -- |
| Check valve | Check valve no | Check valve -- |
| Degree of protection | Degree of protection IP 55 | Degree of protection -- |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 400 | Flow rate min. (l./min.) -- |
| Max flow (l./min.) | Max flow (l./min.) 2600 | Max flow (l./min.) -- |
| Min head (m.) | Min head (m.) 68 | Min head (m.) -- |
| Max head (m.) | Max head (m.) 95 | Max head (m.) -- |
| Max range (m) | Max range (m) -- | Max range (m) 4.6 |
| Working angle | Working angle -- | Working angle fixed |
| Angolo di lavoro | Angolo di lavoro -- | Angolo di lavoro 150 |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) +90°C | Liquid temperature max. (° C) -- |
| Height (cm) | Height (cm) 45 | Height (cm) -- |
| Width (cm) | Width (cm) 84.7 | Width (cm) -- |
| Weight kg) | Weight kg) 219.3 | Weight kg) -- |
| Guarantee | Guarantee 2 | Guarantee -- |
| Type of attack | Type of attack -- | Type of attack female |
