DC 20 - electric Pump in cast iron for clean water three-phase
Flow up to 250 l/min (15 m3/h). Head up to 20 m. Motor 0.75 Kw (1 HP).
The new version of the DC series completely designed and made even more reliable with the introduction of double mechanical seal and treatment in cataphoresis of all the cast iron parts.
The submersible pumps DC, constructed of cast iron of considerable thickness, exceptional strength, and abrasion resistance, and durability, they are recommended for draining clear or slightly dirty.
Stand out for their robustness and reliability in fixed installations with automatic operation.
- Motor connection
- THREE-PHASE
- Motor power (HP)
- 1
- Absorption at 400V (A)
- 2.4
- Delivery port
- 1 "1/2
- Body Pump
- Cast iron
- Impeller
- Technopolymer
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 25
- Max flow (l./min.)
- 250
- Min head (m.)
- 8
- Max head (m.)
- 20
- Cable length (m)
- 10
- Employments
- slightly dirty waters, drainage, drying up
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 32.2
- Weight kg)
- 16.1
- Guarantee
- 2
|
|
|
|
|
Bearings
Pump side motor bearing | 6203 ZZ |
Opposite side engine bearing | 6203 ZZ |
Tree holding
Type of seal | Double mechanical seal in oil chamber |
LM diameter | 14 |
LM fixed ring | Silicon carbide |
LM rotating ring | Graphite |
LM elastomer | NBR |
Shrinkage DN1=450 DN2=350 | MG1-14D SIC |
LP diameter | 14 |
LP fixed ring | Silicon carbide |
LP rotating ring | Silicon carbide |
LP elastomer | NBR |
Materials
1.0 - Pump body | Cast iron GJL 200 EN 1561 |
2.2 - Suction cover | Stainless steel EN 1.4301 (AISI 304) |
3.0 - Impeller | Reinforced technopolymer |
4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
6.0 - Motor holder | Cast iron GJL 200 EN 1561 |
6.1 - Engine cover | Reinforced technopolymer |
7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
DC 20 - electric Pump in cast iron for clean water three-phaseThis product Flow up to 250 l/min (15 m3/h). Head up to 20 m. Motor 0.75 Kw (1 HP). | DC-8 - electric Pump in cast iron for clean water three-phaseFlow up to 250 l/min (15 m3/h). Prevalence up to 12.5 m. Motor 0.55 Kw (0.75 HP). | DC 10 - electric Pump in cast iron for clean water three-phaseFlow rate up to 300 l/min (18 m3/h). Head up to 15.5 m. Motor 0.75 Kw (1 HP). | DC 30 - the electric Pump in cast iron for clean water three-phaseFlow rates up to 275 l/min (16.5 m3/h). Head up to 26 m. Motor 1.1 Kw (1.5 HP). | |
---|---|---|---|---|
Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
Motor power (HP) | Motor power (HP) 1 | Motor power (HP) 1 | Motor power (HP) 1 | Motor power (HP) 1.5 |
Capacitor | Capacitor -- | Capacitor 20 µF450 VL | Capacitor -- | Capacitor -- |
Absorption at 400V (A) | Absorption at 400V (A) 2.4 | Absorption at 400V (A) 1.6 | Absorption at 400V (A) 2.0 | Absorption at 400V (A) 3.0 |
Delivery port | Delivery port 1 "1/2 | Delivery port 1 "1/2 | Delivery port 1 "1/2 | Delivery port 1 "1/2 |
Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron |
Impeller | Impeller Technopolymer | Impeller Technopolymer | Impeller Technopolymer | Impeller Technopolymer |
Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 25 | Flow rate min. (l./min.) 25 | Flow rate min. (l./min.) 25 | Flow rate min. (l./min.) 25 |
Max flow (l./min.) | Max flow (l./min.) 250 | Max flow (l./min.) 250 | Max flow (l./min.) 300 | Max flow (l./min.) 275 |
Min head (m.) | Min head (m.) 8 | Min head (m.) 3 | Min head (m.) 3 | Min head (m.) 9 |
Max head (m.) | Max head (m.) 20 | Max head (m.) 13 | Max head (m.) 16 | Max head (m.) 26 |
Cable length (m) | Cable length (m) 10 | Cable length (m) 10 | Cable length (m) 10 | Cable length (m) 10 |
Employments | Employments slightly dirty waters, drainage, drying up | Employments drying up, drainage | Employments slightly dirty waters, drainage, drying up | Employments slightly dirty waters, drainage, drying up |
Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 |
Height (cm) | Height (cm) 32.2 | Height (cm) 32.2 | Height (cm) 32.2 | Height (cm) 33.7 |
Weight kg) | Weight kg) 16.1 | Weight kg) 15.8 | Weight kg) 16.1 | Weight kg) 17.8 |
Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |