BC 15/50-ST - 1.5 HP three-phase DOUBLE-CHANNEL electric pump for waste water
Flow rate up to 750 l/min (45 m³/h). Head up to 15 m. 1.1 Kw (1.5 HP) motor.




The BC 15/50-ST submersible electric pump is built entirely of stainless steel and is characterised by particular resistance to corrosion and abrasion.
It is recommended for the drainage of dirty and sewage water in the domestic and civil sectors, for the conveyance of waste water and sewage, waste water, surface water, water mixed with mud in holiday homes, villas, single-family homes.
It is equipped with a double-channel impeller that allows the pumping of liquids containing suspended solids up to 50 millimetres in diameter with short fibres.
The hydraulic geometry of the conveying spiral and the dual-channel impeller is the result of a refined fluid-dynamic calculation that has allowed us to obtain excellent performance, a high efficiency that translates into significant energy savings.
The dual-channel impeller allows for excellent performance and high energy efficiency, developing greater pressure and ensuring the pumping of solids with a diameter of up to 50 millimetres. Certainly the best performing solution for wastewater drainage
These pumps are distinguished by their reliability, especially in fixed installations with automatic operation.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 1.1
- Power (HP)
- 1.5
- Absorption at 400V (A)
- 3.2
- Delivery mouth
- 2"
- Pump body
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Min. flow rate (l./min.)
- 50
- Max. flow rate (l./min.)
- 750
- Min. head (m.)
- 2
- Max. head (m.)
- 15
- Cable length (m)
- 10
- Jobs
- drainage, drying up, slightly dirty waters
- Max. liquid temperature (°C)
- 40
- Height (cm)
- 44.7
- Weight (Kg)
- 12.2
- Warranty (years)
- 2
|
|
|
|
|
|

Bearings
Pump side motor bearing | 6203 2RS - C3 |
Opposite side engine bearing | 6203 ZZ |
Tree holding
Type of seal | Double mechanical seal in oil chamber |
Engine side model | MG1-14D SIC |
LM diameter | 14 |
LM fixed ring | Silicon carbide |
LM rotating ring | Graphite |
LM elastomer | NBR |
Shrinkage DN1=450 DN2=350 | MG1-14D SIC |
LP diameter | 14 |
LP fixed ring | Silicon carbide |
LP rotating ring | Silicon carbide |
LP elastomer | NBR |
Materials
1.0 - Pump body | Stainless steel EN 1.4301 (AISI 304) |
1.4 - Basic | Stainless steel EN 1.4301 (AISI 304) |
3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
7.0 - Lantern | Cast iron GJL 200 EN 1561 |
Compare with Similar Products
![]() BC 15/50-ST - 1.5 HP three-phase DOUBLE-CHANNEL electric pump for waste waterThis product Flow rate up to 750 l/min (45 m³/h). Head up to 15 m. 1.1 Kw (1.5 HP) motor. | ![]() BC 10/50-ST - 1 HP three-phase DOUBLE-CHANNEL electric pump for waste waterFlow rate up to 600 l/min (36 m³/h). Head up to 12 m. 0.75 Kw (1 HP) motor. | ![]() BC 20/50-ST - 2 HP three-phase DOUBLE-CHANNEL electric pump for waste waterFlow rate up to 850 l/min (50 m³/h). Head up to 17 m. 1.5 Kw (2 HP) motor. | |
---|---|---|---|
Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
Power (Kw) | Power (Kw) 1.1 | Power (Kw) 0.75 | Power (Kw) 1.5 |
Power (HP) | Power (HP) 1.5 | Power (HP) 1 | Power (HP) 2 |
Absorption at 400V (A) | Absorption at 400V (A) 3.2 | Absorption at 400V (A) 2.1 | Absorption at 400V (A) 3.2 |
Delivery mouth | Delivery mouth 2" | Delivery mouth 2" | Delivery mouth 2" |
Pump body | Pump body AISI 304 stainless steel | Pump body AISI 304 stainless steel | Pump body AISI 304 stainless steel |
Impeller | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel |
Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
Crankshaft | Crankshaft AISI 431 stainless steel | Crankshaft AISI 431 stainless steel | Crankshaft AISI 431 stainless steel |
Check valve | Check valve No | Check valve No | Check valve No |
Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
Min. flow rate (l./min.) | Min. flow rate (l./min.) 50 | Min. flow rate (l./min.) 50 | Min. flow rate (l./min.) 50 |
Max. flow rate (l./min.) | Max. flow rate (l./min.) 750 | Max. flow rate (l./min.) 600 | Max. flow rate (l./min.) 850 |
Min. head (m.) | Min. head (m.) 2 | Min. head (m.) 2 | Min. head (m.) 3 |
Max. head (m.) | Max. head (m.) 15 | Max. head (m.) 12 | Max. head (m.) 17 |
Cable length (m) | Cable length (m) 10 | Cable length (m) 5 | Cable length (m) 10 |
Jobs | Jobs drainage, drying up, slightly dirty waters | Jobs drainage, drying up, slightly dirty waters | Jobs drainage, drying up, slightly dirty waters |
Max. liquid temperature (°C) | Max. liquid temperature (°C) 40 | Max. liquid temperature (°C) 40 | Max. liquid temperature (°C) 40 |
Height (cm) | Height (cm) 44.7 | Height (cm) 43.2 | Height (cm) 44.7 |
Weight (Kg) | Weight (Kg) 12.2 | Weight (Kg) 11.2 | Weight (Kg) 12.2 |
Warranty (years) | Warranty (years) 2 | Warranty (years) 2 | Warranty (years) 2 |