chevron_left chevron_right
-45%
BCm 10/50-ST - 1 HP single-phase DOUBLE-CHANNEL electric pump for waste water
Flow rate up to 600 l/min (36 m³/h). Head up to 12 m. 0.75 Kw (1 HP) motor.
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
We supply all spare parts on this product.
Description
The BC-MF submersible pumps are recommended for the drainage of dirty and sewage water in the domestic and civil sectors.
They are equipped with a DOUBLE-CHANNEL impeller which allows the pumping of liquids containing suspended solids up to Ø 50 mm in size with short fibres.
They are suitable for conveying waste water and sewage, waste water, surface water, water mixed with mud in uses such as: holiday homes, villas, single-family homes.
These pumps are distinguished by their reliability, especially in fixed installations with automatic operation.
Data sheet
- Motor connection
- SINGLE PHASE
- Power (Kw)
- 0.75
- Power (HP)
- 1
- Absorption at 230V (A)
- 5
- Capacitor
- 20 µF450 VL
- Delivery port
- 2"
- Body Pump
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 50
- Max flow (l./min.)
- 600
- Min head (m.)
- 2
- Max head (m.)
- 12
- Cable length (m)
- 5
- Employments
- drainage, drying up, slightly dirty waters
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 43.1
- Weight kg)
- 14.9
- Guarantee
- 2
BCm-ST models and performances
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the BC 10/50-ST
Bearings
| Pump side motor bearing | 6203 ZZ |
| Opposite side engine bearing | 6203 ZZ |
Tree holding
| Type of seal | Double mechanical seal in oil chamber |
| Engine side model | MG1-14D SIC |
| LM diameter | 14 |
| LM fixed ring | Silicon carbide |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | MG1-14D SIC |
| LP diameter | 14 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Stainless steel EN 1.4301 (AISI 304) |
| 1.4 - Basic | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
 BCm 10/50-ST - 1 HP single-phase DOUBLE-CHANNEL electric pump for waste waterThis product Flow rate up to 600 l/min (36 m³/h). Head up to 12 m. 0.75 Kw (1 HP) motor. | |
|---|---|
| Motor connection | Motor connection SINGLE PHASE |
| Power (Kw) | Power (Kw) 0.75 |
| Power (HP) | Power (HP) 1 |
| Absorption at 230V (A) | Absorption at 230V (A) 5 |
| Capacitor | Capacitor 20 µF450 VL |
| Delivery port | Delivery port 2" |
| Body Pump | Body Pump AISI 304 stainless steel |
| Impeller | Impeller AISI 304 stainless steel |
| Number of impellers | Number of impellers 1 |
| Motor shaft | Motor shaft AISI 431 stainless steel |
| Check valve | Check valve no |
| Degree of protection | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 50 |
| Max flow (l./min.) | Max flow (l./min.) 600 |
| Min head (m.) | Min head (m.) 2 |
| Max head (m.) | Max head (m.) 12 |
| Cable length (m) | Cable length (m) 5 |
| Employments | Employments drainage, drying up, slightly dirty waters |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 |
| Height (cm) | Height (cm) 43.1 |
| Weight kg) | Weight kg) 14.9 |
| Guarantee | Guarantee 2 |