D-30 - Pump for clear water three-phase
Flow rates up to 275 l/min (16.5 m3/h). Head up to 26 m. Motor 1.1 Kw (1.5 HP).

Telephone support for information before purchasing.

After-sales assistance for product installation.
Description
Designed for draining clear or slightly dirty, it is recommended for use in domestic, civil and professional for the drainage of flooded basements and garages, such as basements, garages, emptying swimming pools and tanks, disposal of waste water, not sewage.
This pump stands for reliability, in particular in fixed installations with automatic operation.
Data sheet
- Motor connection
- THREE-PHASE
- Power (HP)
- 1.5
- Absorption at 400V (A)
- 3.0
- Delivery mouth
- 1 "1/2
- Pump body
- Cast iron
- Impeller
- Technopolymer
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Min. flow rate (l./min.)
- 25
- Max. flow rate (l./min.)
- 275
- Min. head (m.)
- 9
- Max. head (m.)
- 26
- Cable length (m)
- 10
- Jobs
- drainage, drying up
- Max. liquid temperature (°C)
- 40
- Height (cm)
- 35.5
- Weight (Kg)
- 14
- Warranty (years)
- 2
Models and performance D
|
|
|
|
|
Construction data of the D series

Bearings
Pump side motor bearing | 6203 ZZ |
Opposite side engine bearing | 6203 ZZ |
Tree holding
Type of seal | Double mechanical seal in oil chamber |
LM diameter | 14 |
LM fixed ring | Silicon carbide |
LM rotating ring | Graphite |
LM elastomer | NBR |
Shrinkage DN1=450 DN2=350 | MG1-14D SIC |
LP diameter | 14 |
LP fixed ring | Silicon carbide |
LP rotating ring | Silicon carbide |
LP elastomer | NBR |
Materials
1.0 - Pump body | Cast iron GJL 200 EN 1561 |
2.2 - Suction cover | Stainless steel EN 1.4301 (AISI 304) |
3.0 - Impeller | Reinforced technopolymer |
4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
![]() D-30 - Pump for clear water three-phaseThis product Flow rates up to 275 l/min (16.5 m3/h). Head up to 26 m. Motor 1.1 Kw (1.5 HP). | ![]() PA-EZP-PF6 - 1" assembled sump, 6 zonesTORO Irrigazione components. 9V valves. With programmer and input filter. | |
---|---|---|
Motor connection | Motor connection THREE-PHASE | Motor connection -- |
Power (HP) | Power (HP) 1.5 | Power (HP) -- |
Absorption at 400V (A) | Absorption at 400V (A) 3.0 | Absorption at 400V (A) -- |
Delivery mouth | Delivery mouth 1 "1/2 | Delivery mouth -- |
Pump body | Pump body Cast iron | Pump body -- |
Impeller | Impeller Technopolymer | Impeller -- |
Number of impellers | Number of impellers 1 | Number of impellers -- |
Crankshaft | Crankshaft AISI 431 stainless steel | Crankshaft -- |
Check valve | Check valve No | Check valve -- |
Degree of protection | Degree of protection IP 68 | Degree of protection -- |
Min. flow rate (l./min.) | Min. flow rate (l./min.) 25 | Min. flow rate (l./min.) -- |
Max. flow rate (l./min.) | Max. flow rate (l./min.) 275 | Max. flow rate (l./min.) -- |
Min. head (m.) | Min. head (m.) 9 | Min. head (m.) -- |
Max. head (m.) | Max. head (m.) 26 | Max. head (m.) -- |
Number of zones | Number of zones -- | Number of zones 6 |
Cable length (m) | Cable length (m) 10 | Cable length (m) -- |
Jobs | Jobs drainage, drying up | Jobs -- |
Max. liquid temperature (°C) | Max. liquid temperature (°C) 40 | Max. liquid temperature (°C) -- |
Height (cm) | Height (cm) 35.5 | Height (cm) -- |
Weight (Kg) | Weight (Kg) 14 | Weight (Kg) -- |
Warranty (years) | Warranty (years) 2 | Warranty (years) -- |