TOP MULTI-TECH 3 - Multi-impeller electric pump with press control 0.75 HP
Flow rate up to 120 l/min (7.2 m³/h). Head up to 30.5 m. 0.55 Kw (0.75 HP) motor.
With integrated electronic device that allows you to start or stop the electric pump automatically by opening or closing the tap.
The TOP-MULTI-TECH 3 electric pump is recommended for pumping clean water and liquids that are chemically non-aggressive for the materials from which the pump is made.
Due to their high efficiency and reliability, they are suitable for domestic water supply from relatively deep basins, tanks or wells, for drawing rainwater from cisterns for hand watering or feeding an irrigation system, etc.
The integrated device allows you to start or stop the electric pump automatically by opening or closing the tap.
- Motor connection
- SINGLE PHASE
- Power (Kw)
- 0.55
- Power (HP)
- 0.75
- Absorption at 230V (A)
- 3.6
- Capacitor
- 12.5 µF450 VL
- Delivery port
- 1 "1/4
- Body Pump
- Technopolymer
- Impeller
- Noryl
- Number of impellers
- 3
- Motor shaft
- AISI 431 stainless steel
- Check valve
- Yes
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 10
- Max flow (l./min.)
- 120
- Min head (m.)
- 4
- Max head (m.)
- 33
- Emptying level (mm)
- 35
- Cable length (m)
- 10
- Employments
- water supply, pressurization systems, irrigation
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 42.8
- Width (cm)
- 17.8
- Weight kg)
- 9.5
- Guarantee
- 2
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6202 ZZ - C3 |
| Opposite side engine bearing | 6201 ZZ |
Tree seal
| Type of seal | Double Mechanical Seal in tandem with oil chamber |
| Engine side model | STA-13R |
| LM diameter | 13 |
| LM fixed ring | Ceramic |
| LM rotating ring | Graphite |
| LM Elastomer | NBR |
| Narrowing DN1=450 DN2=350 | STA-12R SG |
| LP diameter | 12 |
| LP fixed ring | Silicon Carbide |
| LP rotating ring | Graphite |
| LP Elastomer | NBR |
Materials
| 1.0 - Pump Body | Reinforced technopolymer |
| 1.3 - Delivery Body | Reinforced technopolymer |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump Tree | Stainless steel EN 1.4057 (AISI 431) |
| 5.0 - Stadium box | Reinforced technopolymer |
| 5.1 - Diffuser | Reinforced technopolymer |
| 5.2 - Shaving Ring | POM Acetal Resin |
| 5.5 - Crown Director | Reinforced technopolymer |
| 6.0 - Engine carrier | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Intake Grille/Filter | Reinforced technopolymer |
Compare with Similar Products
 TOP MULTI-TECH 3 - Multi-impeller electric pump with press control 0.75 HPThis product Flow rate up to 120 l/min (7.2 m³/h). Head up to 30.5 m. 0.55 Kw (0.75 HP) motor. With integrated electronic device that allows you to start or stop the electric pump automatically by opening or closing the tap. |  HTm 3/7 - 2.5 HP single-phase vertical multistage electric pumpFlow rate up to 90 l/min (5.4 m³/h). Head up to 113 m. Motor 1.8 Kw (2.5 HP). | |
|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Power (Kw) | Power (Kw) 0.55 | Power (Kw) 1.8 |
| Power (HP) | Power (HP) 0.75 | Power (HP) 2.5 |
| Absorption at 230V (A) | Absorption at 230V (A) 3.6 | Absorption at 230V (A) -- |
| Capacitor | Capacitor 12.5 µF450 VL | Capacitor -- |
| Suction mouth | Suction mouth -- | Suction mouth 1 " |
| Delivery port | Delivery port 1 "1/4 | Delivery port 1 " |
| Body Pump | Body Pump Technopolymer | Body Pump Cast iron |
| Impeller | Impeller Noryl | Impeller AISI 304 stainless steel |
| Number of impellers | Number of impellers 3 | Number of impellers 3 |
| Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft -- |
| Check valve | Check valve Yes | Check valve no |
| Degree of protection | Degree of protection IP 68 | Degree of protection -- |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 10 | Flow rate min. (l./min.) 10 |
| Max flow (l./min.) | Max flow (l./min.) 120 | Max flow (l./min.) 80 |
| Min head (m.) | Min head (m.) 4 | Min head (m.) 28 |
| Max head (m.) | Max head (m.) 33 | Max head (m.) 52 |
| Emptying level (mm) | Emptying level (mm) 35 | Emptying level (mm) -- |
| Cable length (m) | Cable length (m) 10 | Cable length (m) -- |
| Employments | Employments water supply, pressurization systems, irrigation | Employments fire prevention systems, washing systems, irrigation, pressurization systems, water supply |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) -- |
| Height (cm) | Height (cm) 42.8 | Height (cm) -- |
| Width (cm) | Width (cm) 17.8 | Width (cm) -- |
| Weight kg) | Weight kg) 9.5 | Weight kg) -- |
| Guarantee | Guarantee 2 | Guarantee 2 |
Reviews (3) - Review moderation
Réception sans problème. Bon emballage. Seul souci, le prix comparé à la même pompe achetée en 2018!
Doing the job perfectly!
Livraison impeccable. Après quelques semaines de fonctionnement aucun problème. Il reste à voir les prochaines années. Toute la gestion de l'automatisme étant dans la pompe, l'installation est très simple.
