chevron_left chevron_right
TOP 2 - FLOOR (10m) - 0.50 HP clear water drainage electric pump
Flow rate up to 160 l/min (9.6 m³/h). Head up to 9 m. 0.37 Kw (0.50 HP) motor. 10 meters of cable with shuko plug.
Telephone support for information before purchasing.
After-sales assistance for product installation.
Description
The TOP 2 - FLOOR electric pump by Pedrollo is suitable for draining clear water without abrasive particles.
Thanks to its ability to suck water up to 2 millimetres from the bottom, it is suitable for emergency domestic use in small flooded areas and in all those applications where maximum levels of drainage are required.
Data sheet
- Motor connection
- SINGLE PHASE
- Motor power (HP)
- 0.50
- Absorption at 230V (A)
- 2
- Capacitor
- 10 µF450 VL
- Delivery port
- 1 "1/4
- Body Pump
- Technopolymer
- Impeller
- Noryl
- Number of impellers
- 1
- Motor shaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- Yes
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 20
- Max flow (l./min.)
- 160
- Min head (m.)
- 1
- Max head (m.)
- 9
- Cable length (m)
- 10
- Employments
- drainage, drying up
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 25.7
- Width (cm)
- 15.2
- Weight kg)
- 5
- Guarantee
- 2
TOP models and performances - FLOOR
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the TOP series
Bearings
| Pump side motor bearing | 6201 ZZ |
| Opposite side engine bearing | 6201 ZZ |
Tree holding
| Type of seal | Double Seal: Mechanical and Lip with oil chamber |
| Engine side model | Lip seal |
| LM diameter | 12 |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | STA-12R |
| LP diameter | 12 |
| LP fixed ring | Ceramic |
| LP rotating ring | Graphite |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Reinforced technopolymer |
| 2.2 - Suction cover | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Reinforced technopolymer |
Compare with Similar Products
 TOP 2 - FLOOR (10m) - 0.50 HP clear water drainage electric pumpThis product Flow rate up to 160 l/min (9.6 m³/h). Head up to 9 m. 0.37 Kw (0.50 HP) motor. 10 meters of cable with shuko plug. |  TOP 2 (10m) - 0.50 HP clear water drainage electric pumpFlow rate up to 220 l/min (13.2 m³/h). Head up to 9 m. 0.37 Kw (0.50 HP) motor. 10 meters of cable with shuko plug. |  TOP 2 - LA - Drainage pump for aggressive liquids 0.50 HPFlow rate up to 220 l/min (13.2 m³/h). Head up to 9 m. 0.37 Kw (0.50 HP) motor. 10 meters of cable with shuko plug. |  TOP 2 - VORTEX (10m) - 0.50 HP Electric Drainage Pump for Dirty WaterFlow rate up to 180 l/min (10.8 m³/h). Head up to 7 m. 0.37 Kw (0.5 HP) motor. 10 meters of cable with shuko plug. | |
|---|---|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Motor power (HP) | Motor power (HP) 0.50 | Motor power (HP) 0.50 | Motor power (HP) 0.50 | Motor power (HP) 0.50 |
| Absorption at 230V (A) | Absorption at 230V (A) 2 | Absorption at 230V (A) 2 | Absorption at 230V (A) 2.0 | Absorption at 230V (A) 2 |
| Capacitor | Capacitor 10 µF450 VL | Capacitor 10 µF450 VL | Capacitor 10 µF450 VL | Capacitor 10 µF450 VL |
| Delivery port | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/4 |
| Body Pump | Body Pump Technopolymer | Body Pump Technopolymer | Body Pump Technopolymer | Body Pump Technopolymer |
| Impeller | Impeller Noryl | Impeller Noryl | Impeller Noryl | Impeller Technopolymer |
| Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
| Motor shaft | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft AISI 431 stainless steel | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft AISI 431 stainless steel |
| Check valve | Check valve Yes | Check valve no | Check valve no | Check valve no |
| Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 |
| Max flow (l./min.) | Max flow (l./min.) 160 | Max flow (l./min.) 220 | Max flow (l./min.) 160 | Max flow (l./min.) 180 |
| Min head (m.) | Min head (m.) 1 | Min head (m.) 1 | Min head (m.) 1 | Min head (m.) 1.5 |
| Max head (m.) | Max head (m.) 9 | Max head (m.) 9 | Max head (m.) 6 | Max head (m.) 7 |
| Cable length (m) | Cable length (m) 10 | Cable length (m) 10 | Cable length (m) 5 | Cable length (m) 10 |
| Employments | Employments drainage, drying up | Employments drainage, drying up | Employments -- | Employments drainage, drying up, slightly dirty waters |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) +40°C | Liquid temperature max. (° C) 40 |
| Height (cm) | Height (cm) 25.7 | Height (cm) 25.7 | Height (cm) 25.7 | Height (cm) 28.8 |
| Width (cm) | Width (cm) 15.2 | Width (cm) 15.2 | Width (cm) 15.2 | Width (cm) 15.2 |
| Weight kg) | Weight kg) 5 | Weight kg) 5.2 | Weight kg) 5.2 | Weight kg) 5.2 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |