TOP 2 - LA - Drainage pump for aggressive liquids 0.50 HP
Flow rate up to 220 l/min (13.2 m³/h). Head up to 9 m. 0.37 Kw (0.50 HP) motor. 10 meters of cable with shuko plug.

Telephone support for information before purchasing.

Reinforced packaging to reduce transport damage.

After-sales assistance for product installation.

We supply all spare parts on this product.
Description
The TOP LA series is suitable for draining aggressive liquids.
The construction solutions employed guarantee ease of use and operational safety thanks to the total cooling of the motor and the double seal on the shaft.
Data sheet
- Motor connection
- SINGLE PHASE
- Power (HP)
- 0.50
- Absorption at 230V (A)
- 2.0
- Capacitor
- 10 µF450 VL
- Delivery mouth
- 1 "1/4
- Pump body
- Technopolymer
- Impeller
- Noryl
- Number of impellers
- 1
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Degree of protection
- IP 68
- Min. flow rate (l./min.)
- 20
- Max. flow rate (l./min.)
- 160
- Min. head (m.)
- 1
- Max. head (m.)
- 6
- Cable length (m)
- 5
- Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 25.7
- Width (cm)
- 15.2
- Weight (Kg)
- 5.2
- Warranty (years)
- 2
Construction data of the TOP series

Bearings
Pump side motor bearing | 6201 ZZ |
Opposite side engine bearing | 6201 ZZ |
Tree holding
Type of seal | Double Seal: Mechanical and Lip with oil chamber |
Engine side model | Lip seal |
LM diameter | 12 |
LM elastomer | NBR |
Shrinkage DN1=450 DN2=350 | STA-12R |
LP diameter | 12 |
LP fixed ring | Ceramic |
LP rotating ring | Graphite |
LP elastomer | NBR |
Materials
1.0 - Pump body | Reinforced technopolymer |
2.2 - Suction cover | Stainless steel EN 1.4301 (AISI 304) |
3.0 - Impeller | Reinforced technopolymer |
4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
5.1 - Diffuser | Reinforced technopolymer |
6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
8.0 - Suction Grid/Filter | Reinforced technopolymer |
Compare with Similar Products
![]() TOP 2 - LA - Drainage pump for aggressive liquids 0.50 HPThis product Flow rate up to 220 l/min (13.2 m³/h). Head up to 9 m. 0.37 Kw (0.50 HP) motor. 10 meters of cable with shuko plug. | ![]() TOP 3 - LA - Drainage pump for aggressive liquids 0.75 HPFlow rate up to 260 l/min (15.6 m³/h). Head up to 10.5 m. 0.55 Kw (0.75 HP) motor. 10 meters of cable with shuko plug. | |
---|---|---|
Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
Power (HP) | Power (HP) 0.50 | Power (HP) 0.75 |
Absorption at 230V (A) | Absorption at 230V (A) 2.0 | Absorption at 230V (A) 3.2 |
Capacitor | Capacitor 10 µF450 VL | Capacitor 14 µF450 VL |
Delivery mouth | Delivery mouth 1 "1/4 | Delivery mouth 1 "1/4 |
Pump body | Pump body Technopolymer | Pump body Technopolymer |
Impeller | Impeller Noryl | Impeller Noryl |
Number of impellers | Number of impellers 1 | Number of impellers 1 |
Crankshaft | Crankshaft Stainless steel EN 10088-3 1.4104 | Crankshaft Stainless steel EN 10088-3 1.4104 |
Check valve | Check valve No | Check valve Yes |
Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 |
Min. flow rate (l./min.) | Min. flow rate (l./min.) 20 | Min. flow rate (l./min.) 20 |
Max. flow rate (l./min.) | Max. flow rate (l./min.) 160 | Max. flow rate (l./min.) 260 |
Min. head (m.) | Min. head (m.) 1 | Min. head (m.) 2 |
Max. head (m.) | Max. head (m.) 6 | Max. head (m.) 10 |
Cable length (m) | Cable length (m) 5 | Cable length (m) 5 |
Max. liquid temperature (°C) | Max. liquid temperature (°C) +40°C | Max. liquid temperature (°C) +40°C |
Height (cm) | Height (cm) 25.7 | Height (cm) 28.7 |
Width (cm) | Width (cm) 15.2 | Width (cm) 15.2 |
Weight (Kg) | Weight (Kg) 5.2 | Weight (Kg) 6.6 |
Warranty (years) | Warranty (years) 2 | Warranty (years) 2 |