TIGm 0.75 - Submersible electric pump with single-phase grinder 1 HP
Flow rate up to 140 l/min (7.8 m³/h). Head up to 18.5 m. 0.75 Kw (1 HP) motor.
The Pedrollo TIGm 0.75 single-phase grinder pump is ideal for working safely when working conditions become challenging.
The TIGm 0.75 pump of the TRITUS-INOX series is equipped with a high-tempered stainless steel grinder that allows for the complete grinding of solid bodies and fibres contained in waste water and waste water in the domestic and civil sectors, for conveying under pressure into the sewer system through small diameter pipes.
The maximum flow rate is 140 litres per minute and the head is up to 18.5 metres.
The pump is equipped with a 10 meter cable, it can be immersed up to 5 meters underwater.
It has an IP68 certification which is safe from dust and water ingress.
- Motor connection
- SINGLE PHASE
- Power (Kw)
- 0.75
- Power (HP)
- 1
- Absorption at 230V (A)
- 5.5
- Delivery mouth
- 1 "1/2
- Pump body
- Cast iron
- Impeller
- Technopolymer
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Min. flow rate (l./min.)
- 20
- Max. flow rate (l./min.)
- 140
- Min. head (m.)
- 2
- Max. head (m.)
- 18.5
- Cable length (m)
- 10
- Jobs
- slightly dirty waters, drainage, drying up
- Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 39.8
- Width (cm)
- 17.7
- Depth (cm)
- 23.2
- Weight (Kg)
- 16.0
- Warranty (years)
- 2
Construction
Bearings
| Pump side motor bearing | 6303 2RS-C3 |
| Opposite side engine bearing | 6203 ZZ-C3E |
Tree seal
| Type of seal | Double Mechanical Seal in oil chamber |
| LM diameter | 14 |
| LM fixed ring | Silicon Carbide |
| LM rotating ring | Graphite |
| LM Elastomer | NBR |
| Narrowing DN1=450 DN2=350 | MG1-14D SIC |
| LP diameter | 14 |
| LP fixed ring | Silicon Carbide |
| LP Rotating Ring | Silicon Carbide |
| LP Elastomer | NBR |
Materials
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Technopolymer |
| 3.2 - Shredder | Stainless steel EN 1.4125 (AISI 440C) hardened |
| 4.0 - Pump Tree | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Engine carrier | Stainless steel EN 1.4301 (AISI 304) |
| 7.0 - Lantern | Cast iron GJL 200 EN 1561 |
Compare with Similar Products
 TIGm 0.75 - Submersible electric pump with single-phase grinder 1 HPThis product Flow rate up to 140 l/min (7.8 m³/h). Head up to 18.5 m. 0.75 Kw (1 HP) motor. |  NKm 2/2-GE (10m) - Single-phase submersible electric pump with float switch 0.50 HPFlow rate up to 80 l/min (4.8 m³/h). Head up to 33 m. 0.37 Kw (0.50 HP) motor. 10 meters of cable. |  4SRm 1.5/22 S-PD - 1.5 HP single-phase submersible electric pumpFlow rate up to 45 l/min (2.7 m³/h). Head up to 158 meters. 1.1 Kw (1.5 HP) motor. |  4SR 1.5/22 S-PD - 1.5 HP three-phase submersible electric pumpFlow rate up to 45 l/min (2.7 m³/h). Head up to 158 meters. 1.1 Kw (1.5 HP) motor. | |
|---|---|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection THREE-PHASE |
| Power (Kw) | Power (Kw) 0.75 | Power (Kw) 0.37 | Power (Kw) 1.1 | Power (Kw) 1.1 |
| Power (HP) | Power (HP) 1 | Power (HP) 0.50 | Power (HP) 1.5 | Power (HP) 1.5 |
| Absorption at 230V (A) | Absorption at 230V (A) 5.5 | Absorption at 230V (A) 4.3 | Absorption at 230V (A) -- | Absorption at 230V (A) -- |
| Capacitor | Capacitor -- | Capacitor 16 µF450 VL | Capacitor -- | Capacitor -- |
| Delivery mouth | Delivery mouth 1 "1/2 | Delivery mouth 1 "1/4 | Delivery mouth 1 "1/4 | Delivery mouth 1 "1/4 |
| Pump body | Pump body Cast iron | Pump body AISI 304 stainless steel | Pump body -- | Pump body -- |
| Impeller | Impeller Technopolymer | Impeller Noryl | Impeller -- | Impeller -- |
| Number of impellers | Number of impellers 1 | Number of impellers 2 | Number of impellers -- | Number of impellers -- |
| Crankshaft | Crankshaft AISI 431 stainless steel | Crankshaft AISI 431 stainless steel | Crankshaft -- | Crankshaft -- |
| Check valve | Check valve No | Check valve No | Check valve -- | Check valve -- |
| Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
| Min. flow rate (l./min.) | Min. flow rate (l./min.) 20 | Min. flow rate (l./min.) 10 | Min. flow rate (l./min.) 5 | Min. flow rate (l./min.) 5 |
| Max. flow rate (l./min.) | Max. flow rate (l./min.) 140 | Max. flow rate (l./min.) 80 | Max. flow rate (l./min.) 45 | Max. flow rate (l./min.) 45 |
| Min. head (m.) | Min. head (m.) 2 | Min. head (m.) 16.4 | Min. head (m.) 52.5 | Min. head (m.) 52.5 |
| Max. head (m.) | Max. head (m.) 18.5 | Max. head (m.) 33 | Max. head (m.) 158 | Max. head (m.) 158 |
| Cable length (m) | Cable length (m) 10 | Cable length (m) 10 | Cable length (m) 2 | Cable length (m) 2 |
| Jobs | Jobs slightly dirty waters, drainage, drying up | Jobs water supply, pressurization systems, irrigation | Jobs irrigation | Jobs irrigation |
| Max. liquid temperature (°C) | Max. liquid temperature (°C) +40°C | Max. liquid temperature (°C) 40 | Max. liquid temperature (°C) -- | Max. liquid temperature (°C) -- |
| Height (cm) | Height (cm) 39.8 | Height (cm) 45.9 | Height (cm) -- | Height (cm) -- |
| Width (cm) | Width (cm) 17.7 | Width (cm) -- | Width (cm) -- | Width (cm) -- |
| Depth (cm) | Depth (cm) 23.2 | Depth (cm) -- | Depth (cm) -- | Depth (cm) -- |
| External diameter (cm) | External diameter (cm) -- | External diameter (cm) 13.5 | External diameter (cm) -- | External diameter (cm) -- |
| Weight (Kg) | Weight (Kg) 16.0 | Weight (Kg) 13 | Weight (Kg) 17 | Weight (Kg) 17 |
| Warranty (years) | Warranty (years) 2 | Warranty (years) 2 | Warranty (years) 2 | Warranty (years) 2 |
