TIGm 1.1 - Submersible electric pump with single-phase grinder 1.5 HP
Flow rate up to 150 l/min (9 m³/h). Head up to 24 m. 1.1 Kw (1.5 HP) motor.
The Pedrollo TIGm 1.1 single-phase grinder pump is equipped with a high-resistance tempered stainless steel grinder.
The pump is equipped with a 10 meter cable, it can be immersed up to 5 meters underwater.
The TIGm 1.1 allows for the complete shredding of solid bodies and fibres contained in waste water and waste water in the domestic and civil sectors, for conveyance under pressure into the sewer system through small diameter pipes.
It has a flow rate that varies from 20 to 150 litres per minute with a head of 2 to 24 metres.
It must be powered by a single-phase voltage, has a horsepower of 1.5 HP and the temperature of the liquid to be pumped ranges from -15 degrees centigrade up to +40.
It has an IP68 certification which is safe from dust and water ingress.
The TIGm 1.1 is equipped with an external electrical panel for greater operational safety thanks to the special capacitor that significantly increases the torque. The panel includes a manually resettable motor protection switch.
The pump is made of materials such as cast iron and stainless steel which give the pump good resistance and allow it to last over time.
- Motor connection
- SINGLE PHASE
- Power (Kw)
- 1.1
- Power (HP)
- 1.5
- Absorption at 230V (A)
- Delivery port
- 1 "1/2
- Body Pump
- Cast iron
- Impeller
- Technopolymer
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- Max flow (l./min.)
- Min head (m.)
- Max head (m.)
- Cable length (m)
- Employments
- slightly dirty waters, drainage, drying up
- Liquid temperature max. (° C)
- Height (cm)
- Width (cm)
- Depth (cm)
- Weight kg)
- Guarantee
- 2
Construction
Bearings
| Pump side motor bearing | 6303 2RS-C3 |
| Opposite side engine bearing | 6203 ZZ-C3E |
Tree seal
| Type of seal | Double Mechanical Seal in oil chamber |
| LM diameter | 14 |
| LM fixed ring | Silicon Carbide |
| LM rotating ring | Graphite |
| LM Elastomer | NBR |
| Narrowing DN1=450 DN2=350 | MG1-14D SIC |
| LP diameter | 14 |
| LP fixed ring | Silicon Carbide |
| LP Rotating Ring | Silicon Carbide |
| LP Elastomer | NBR |
Materials
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Technopolymer |
| 3.2 - Shredder | Stainless steel EN 1.4125 (AISI 440C) hardened |
| 4.0 - Pump Tree | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Engine carrier | Stainless steel EN 1.4301 (AISI 304) |
| 7.0 - Lantern | Cast iron GJL 200 EN 1561 |
Compare with Similar Products
 TIGm 1.1 - Submersible electric pump with single-phase grinder 1.5 HPThis product Flow rate up to 150 l/min (9 m³/h). Head up to 24 m. 1.1 Kw (1.5 HP) motor. |  NKm 2/2-GE (10m) - Single-phase submersible electric pump with float switch 0.50 HPFlow rate up to 80 l/min (4.8 m³/h). Head up to 33 m. 0.37 Kw (0.50 HP) motor. 10 meters of cable. |  NK 2/2 (10m) - Three-phase submersible electric pump 400 V 0.50 HPFlow rate up to 80 l/min (4.8 m³/h). Head up to 33 m. 0.37 Kw (0.5 HP) motor. 10 meters of cable. |  4SR 1.5/22 S-PD - 1.5 HP three-phase submersible electric pumpFlow rate up to 45 l/min (2.7 m³/h). Head up to 158 meters. 1.1 Kw (1.5 HP) motor. | |
|---|---|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
| Power (Kw) | Power (Kw) 1.1 | Power (Kw) 0.37 | Power (Kw) 0.37 | Power (Kw) 1.1 |
| Power (HP) | Power (HP) 1.5 | Power (HP) 0.50 | Power (HP) 0.50 | Power (HP) 1.5 |
| Absorption at 230V (A) | Absorption at 230V (A) -- | Absorption at 230V (A) 4.4 | Absorption at 230V (A) -- | Absorption at 230V (A) -- |
| Capacitor | Capacitor -- | Capacitor 16 µF450 VL | Capacitor -- | Capacitor -- |
| Absorption at 400V (A) | Absorption at 400V (A) -- | Absorption at 400V (A) -- | Absorption at 400V (A) 1.6 | Absorption at 400V (A) -- |
| Delivery port | Delivery port 1 "1/2 | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/4 |
| Body Pump | Body Pump Cast iron | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump -- |
| Impeller | Impeller Technopolymer | Impeller Noryl | Impeller Noryl | Impeller -- |
| Number of impellers | Number of impellers 1 | Number of impellers 2 | Number of impellers 2 | Number of impellers -- |
| Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft -- |
| Check valve | Check valve no | Check valve no | Check valve no | Check valve -- |
| Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) -- | Flow rate min. (l./min.) 10 | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 5 |
| Max flow (l./min.) | Max flow (l./min.) -- | Max flow (l./min.) 80 | Max flow (l./min.) 80 | Max flow (l./min.) 45 |
| Min head (m.) | Min head (m.) -- | Min head (m.) 17 | Min head (m.) 17 | Min head (m.) 52.5 |
| Max head (m.) | Max head (m.) -- | Max head (m.) 33 | Max head (m.) 33 | Max head (m.) 154 |
| Cable length (m) | Cable length (m) -- | Cable length (m) 10 | Cable length (m) 10 | Cable length (m) 2 |
| Employments | Employments slightly dirty waters, drainage, drying up | Employments water supply, pressurization systems, irrigation | Employments water supply, pressurization systems, irrigation | Employments irrigation |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) -- | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) -- |
| Height (cm) | Height (cm) -- | Height (cm) 45.9 | Height (cm) 45.9 | Height (cm) -- |
| Width (cm) | Width (cm) -- | Width (cm) -- | Width (cm) -- | Width (cm) -- |
| Depth (cm) | Depth (cm) -- | Depth (cm) -- | Depth (cm) -- | Depth (cm) -- |
| Outside diameter (cm) | Outside diameter (cm) -- | Outside diameter (cm) 13.5 | Outside diameter (cm) 13.5 | Outside diameter (cm) -- |
| Weight kg) | Weight kg) -- | Weight kg) 14 | Weight kg) 13.8 | Weight kg) 17 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |
