VX 10/35-MF - 1 HP three-phase VORTEX sewage pump
Flow rate up to 400 l/min (24 m³/h). Head up to 11 m. 0.75 Kw (1 HP) motor.




The VX 10/35-MF submersible electric pump from the VX-MF series by Pedrollo is characterised by particular resistance to corrosion and abrasion.
Pedrollo has made the electric pump entirely of stainless steel for greater resistance and solidity.
The capabilities of the VX 10/35-MF are evident in extreme working situations.
The vortex impeller allows the pumping of solids with a diameter of up to 50 millimetres and ensures safe operation against clogging.
It can be installed up to 5 meters below water level.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 0.75
- Power (HP)
- 1
- Current consumption at 400V (A)
- 2
- Delivery mouth
- 1" 1/2
- Pump body
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Crankshaft
- AISI 304 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 50
- Max. flow rate (l./min.)
- 400
- Min. head (m.)
- 2
- Max. head (m.)
- 11
- Cable length (m.)
- 10
- Jobs
- drainage, drying up, slightly dirty waters
- Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 41
- Weight (Kg)
- 12.5
- Warranty (years)
- 2
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

Bearings
| Pump side motor bearing | 6203 ZZ |
| Opposite side engine bearing | 6203 ZZ |
Tree holding
| Type of seal | Double mechanical seal in oil chamber |
| LM diameter | 14 |
| LM fixed ring | Silicon carbide |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | MG1-14D SIC |
| LP diameter | 14 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Stainless steel EN 1.4404 (AISI 316L) |
| 1.4 - Basic | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4404 (AISI 316L) |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
![]() VX 10/35-MF - 1 HP three-phase VORTEX sewage pumpThis product Flow rate up to 400 l/min (24 m³/h). Head up to 11 m. 0.75 Kw (1 HP) motor. | ![]() VX 8/35-MF - 0.75 HP three-phase VORTEX electric sewage pumpFlow rate up to 350 l/min (21 m³/h). Head up to 9 m. 0.55 Kw (0.75 HP) motor. | ![]() VX 15/35-MF - 1.5 HP three-phase VORTEX electric sewage pumpFlow rate up to 500 l/min (35 m³/h). Head up to 14 m. 1.1 kW (1.5 HP) motor. | ![]() VX 20/35-MF - 2 HP three-phase VORTEX sewage pumpFlow rate up to 600 l/min (36 m³/h). Head up to 15.5 m. 1.5 kW (2 HP) motor. | |
|---|---|---|---|---|
| Price | Price €877.18 -42% €508.76 | Price €864.98 -42% €501.69 | Price €962.58 -42% €558.30 | Price €1,083.36 -42% €628.35 |
| Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
| Power (Kw) | Power (Kw) 0.75 | Power (Kw) 0.55 | Power (Kw) 1.1 | Power (Kw) 1.5 |
| Power (HP) | Power (HP) 1 | Power (HP) 0.75 | Power (HP) 1.5 | Power (HP) 2 |
| Absorption at 230V (A) | Absorption at 230V (A) -- | Absorption at 230V (A) -- | Absorption at 230V (A) -- | Absorption at 230V (A) 7.4 |
| Current consumption at 400V (A) | Current consumption at 400V (A) 2 | Current consumption at 400V (A) 1.7 | Current consumption at 400V (A) 3 | Current consumption at 400V (A) -- |
| Capacitor | Capacitor -- | Capacitor -- | Capacitor -- | Capacitor 25 µF 450 VL |
| Delivery mouth | Delivery mouth 1" 1/2 | Delivery mouth 1" 1/2 | Delivery mouth 1" 1/2 | Delivery mouth 1" 1/2 |
| Pump body | Pump body AISI 304 stainless steel | Pump body AISI 304 stainless steel | Pump body AISI 304 stainless steel | Pump body AISI 304 stainless steel |
| Impeller | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel |
| Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
| Crankshaft | Crankshaft AISI 304 stainless steel | Crankshaft AISI 304 stainless steel | Crankshaft AISI 304 stainless steel | Crankshaft AISI 304 stainless steel |
| Check valve | Check valve No | Check valve No | Check valve No | Check valve No |
| Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
| Minimum flow rate (l./min.) | Minimum flow rate (l./min.) 50 | Minimum flow rate (l./min.) 50 | Minimum flow rate (l./min.) 50 | Minimum flow rate (l./min.) 50 |
| Max. flow rate (l./min.) | Max. flow rate (l./min.) 400 | Max. flow rate (l./min.) 350 | Max. flow rate (l./min.) 500 | Max. flow rate (l./min.) 500 |
| Min. head (m.) | Min. head (m.) 2 | Min. head (m.) 1 | Min. head (m.) 2 | Min. head (m.) 2 |
| Max. head (m.) | Max. head (m.) 11 | Max. head (m.) 9 | Max. head (m.) 14 | Max. head (m.) 14 |
| Cable length (m.) | Cable length (m.) 10 | Cable length (m.) 10 | Cable length (m.) 10 | Cable length (m.) 10 |
| Jobs | Jobs drainage, drying up, slightly dirty waters | Jobs drainage, drying up, slightly dirty waters | Jobs drainage, drying up, slightly dirty waters | Jobs drainage, drying up, slightly dirty waters |
| Max. liquid temperature (°C) | Max. liquid temperature (°C) +40°C | Max. liquid temperature (°C) +40°C | Max. liquid temperature (°C) +40°C | Max. liquid temperature (°C) +40°C |
| Height (cm) | Height (cm) 41 | Height (cm) 40.6 | Height (cm) 42.1 | Height (cm) 42.1 |
| Weight (Kg) | Weight (Kg) 12.5 | Weight (Kg) 12.5 | Weight (Kg) 13.9 | Weight (Kg) 15 |
| Warranty (years) | Warranty (years) 2 | Warranty (years) 2 | Warranty (years) 2 | Warranty (years) 2 |



