chevron_left chevron_right
-42%
VXm 8/35-ST - Single-phase VORTEX sewage pump 0.75 HP
Flow rate up to 350 l/min (21 m³/h). Head up to 9.5 m. 0.55 Kw (0.75 HP) motor.
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
We supply all spare parts on this product.
Description
The VX-ST series pumps are recommended for the drainage of waste water in the domestic, civil and industrial sectors, in all cases where suspended solids are present in the water, for example water mixed with mud, groundwater, surface water.
Its use is recommended for draining flooded areas such as basements, underground car parks, car wash areas, for emptying cesspits and for the disposal of sewage.
The VX-ST pumps are made of stamped stainless steel, particularly robust and highly reliable, and offer high performance for professional, chemical and industrial use.
These pumps are distinguished by their reliability, in fixed installations with automatic operation.
Data sheet
- Motor connection
- SINGLE PHASE
- Power (Kw)
- 0.55
- Power (HP)
- 0.75
- Absorption at 230V (A)
- 3.5
- Capacitor
- 20 µF450 VL
- Delivery port
- 1 "1/2
- Body Pump
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 50
- Max flow (l./min.)
- 350
- Min head (m.)
- 1
- Max head (m.)
- 9.5
- Cable length (m)
- 10
- Employments
- drainage, drying up, slightly dirty waters
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 40.6
- Weight kg)
- 10.3
- Guarantee
- 2
Construction data of the VX 8/35-ST
Bearings
| Pump side motor bearing | 6203 ZZ |
| Opposite side engine bearing | 6203 ZZ |
Tree holding
| Type of seal | Double mechanical seal in oil chamber |
| LM diameter | 14 |
| LM fixed ring | Silicon carbide |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | MG1-14D SIC |
| LP diameter | 14 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Stainless steel EN 1.4301 (AISI 304) |
| 1.4 - Basic | Stainless steel EN 1.4301 (AISI 304) |
| 2.0 - Lid | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
VXm /35-ST Models and Performance
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Compare with Similar Products
 VXm 8/35-ST - Single-phase VORTEX sewage pump 0.75 HPThis product Flow rate up to 350 l/min (21 m³/h). Head up to 9.5 m. 0.55 Kw (0.75 HP) motor. |  MINI-CLIK - Rain sensorCable connection. |  WR2-RFC - Rain and frost sensorWireless. |  PSS-KIT-EU - Humidity sensor kitWireless connection. | |
|---|---|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection -- | Motor connection -- | Motor connection -- |
| Power (Kw) | Power (Kw) 0.55 | Power (Kw) -- | Power (Kw) -- | Power (Kw) -- |
| Power (HP) | Power (HP) 0.75 | Power (HP) -- | Power (HP) -- | Power (HP) -- |
| Absorption at 230V (A) | Absorption at 230V (A) 3.5 | Absorption at 230V (A) -- | Absorption at 230V (A) -- | Absorption at 230V (A) -- |
| Capacitor | Capacitor 20 µF450 VL | Capacitor -- | Capacitor -- | Capacitor -- |
| Delivery port | Delivery port 1 "1/2 | Delivery port -- | Delivery port -- | Delivery port -- |
| Body Pump | Body Pump AISI 304 stainless steel | Body Pump -- | Body Pump -- | Body Pump -- |
| Impeller | Impeller AISI 304 stainless steel | Impeller -- | Impeller -- | Impeller -- |
| Number of impellers | Number of impellers 1 | Number of impellers -- | Number of impellers -- | Number of impellers -- |
| Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft -- | Motor shaft -- | Motor shaft -- |
| Check valve | Check valve no | Check valve -- | Check valve -- | Check valve -- |
| Degree of protection | Degree of protection IP 68 | Degree of protection -- | Degree of protection -- | Degree of protection -- |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) -- | Flow rate min. (l./min.) -- | Flow rate min. (l./min.) -- |
| Max flow (l./min.) | Max flow (l./min.) 350 | Max flow (l./min.) -- | Max flow (l./min.) -- | Max flow (l./min.) -- |
| Min head (m.) | Min head (m.) 1 | Min head (m.) -- | Min head (m.) -- | Min head (m.) -- |
| Max head (m.) | Max head (m.) 9.5 | Max head (m.) -- | Max head (m.) -- | Max head (m.) -- |
| Cable length (m) | Cable length (m) 10 | Cable length (m) -- | Cable length (m) -- | Cable length (m) -- |
| Employments | Employments drainage, drying up, slightly dirty waters | Employments -- | Employments -- | Employments -- |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) -- | Liquid temperature max. (° C) -- | Liquid temperature max. (° C) -- |
| Height (cm) | Height (cm) 40.6 | Height (cm) 5 | Height (cm) -- | Height (cm) -- |
| Length (cm) | Length (cm) -- | Length (cm) 15 | Length (cm) -- | Length (cm) -- |
| Weight kg) | Weight kg) 10.3 | Weight kg) -- | Weight kg) -- | Weight kg) -- |
| Guarantee | Guarantee 2 | Guarantee -- | Guarantee -- | Guarantee -- |