chevron_left chevron_right
-45%
VXCm 15/65-F - 1.5 HP Single-Phase VORTEX Electric Pump for Sewage Water
Flow rate up to 850 l/min (51 m³/h). Head up to 5.5 m. 1.1 Kw (1.5 HP) motor.
Variants: 
Order it before 4 hours and 32 minutes and receive it between 30-12-2024 and 31-12-2024 with SDA - 2 giorni Italia
There are no reviews yet
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
Description
The VXC series electric pumps, built in cast iron of considerable thickness and exceptional strength as well as resistance to abrasion and durability over time, are equipped with a VORTEX type impeller.
Suitable for draining waste water, water mixed with mud, liquids containing air or gas, as well as aerated and putrid sludge.
They are recommended for fixed installation in sewers, tunnels, wells, underground car parks, within special manholes.
Data sheet
- Motor connection
- SINGLE PHASE
- Power (HP)
- 1.5
- Absorption at 230V (A)
- 8.7
- Capacitor
- 31.5 µF450 VL
- Delivery port
- 3 "
- Body Pump
- Cast iron
- Impeller
- Cast iron
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 200
- Max flow (l./min.)
- 850
- Min head (m.)
- 1
- Max head (m.)
- 6.5
- Cable length (m)
- 10
- Employments
- drainage, drying up, slightly dirty waters
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 45.8
- Weight kg)
- 41.4
- Guarantee
- 2
VXCm-F models and performances
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the VXCm 15/50-F
Bearings
| Pump side motor bearing | 6305 CM D 6 |
| Opposite side engine bearing | 6204 ZZ-C3 |
Tree holding
| Type of seal | Double Mechanical Seal in tandem with oil chamber |
| Engine side model | STA-22 |
| LM diameter | 22 |
| LM fixed ring | Ceramic |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | STA-20 |
| LP diameter | 20 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Cast iron GJL 200 EN 1561 |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | Cast iron GJL 200 EN 1561 |
| 6.1 - Engine cover | Cast iron GJL 200 EN 1561 |
Compare with Similar Products
 VXCm 15/65-F - 1.5 HP Single-Phase VORTEX Electric Pump for Sewage WaterThis product Flow rate up to 850 l/min (51 m³/h). Head up to 5.5 m. 1.1 Kw (1.5 HP) motor. |  VXCm 15/50-F - 1.5 HP Single-Phase VORTEX Electric Pump for Waste WaterFlow rate up to 600 l/min (36 m³/h). Head up to 7.5 m. 1.1 Kw (1.5 HP) motor. |  VXCm 20/50-F - 2 HP Single-Phase VORTEX Electric Pump for Waste WaterFlow rate up to 700 l/min (42 m³/h) Head up to 12 m 1.5 Kw (2 HP) motor |  VXCm 20/65-F 2 HP Single Phase VORTEX Electric Pump for Sewage WaterFlow rate up to 1000 l/min (60 m³/h). Head up to 7.4 m. 1.5 Kw (2 HP) motor. | |
|---|---|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Power (HP) | Power (HP) 1.5 | Power (HP) 1.5 | Power (HP) 2 | Power (HP) 2 |
| Absorption at 230V (A) | Absorption at 230V (A) 8.7 | Absorption at 230V (A) 8.8 | Absorption at 230V (A) 10.2 | Absorption at 230V (A) 10 |
| Capacitor | Capacitor 31.5 µF450 VL | Capacitor 31.5 µF450 VL | Capacitor 50 µF450 VL | Capacitor 50 µF450 VL |
| Delivery port | Delivery port 3 " | Delivery port 2 "1/2 | Delivery port 2 "1/2 | Delivery port 3 " |
| Body Pump | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron | Body Pump Cast iron |
| Impeller | Impeller Cast iron | Impeller Cast iron | Impeller Cast iron | Impeller Cast iron |
| Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
| Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
| Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
| Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 200 | Flow rate min. (l./min.) 100 | Flow rate min. (l./min.) 100 | Flow rate min. (l./min.) 200 |
| Max flow (l./min.) | Max flow (l./min.) 850 | Max flow (l./min.) 600 | Max flow (l./min.) 700 | Max flow (l./min.) 1000 |
| Min head (m.) | Min head (m.) 1 | Min head (m.) 2 | Min head (m.) 2 | Min head (m.) 1 |
| Max head (m.) | Max head (m.) 6.5 | Max head (m.) 11.5 | Max head (m.) 13 | Max head (m.) 8.5 |
| Cable length (m) | Cable length (m) 10 | Cable length (m) 10 | Cable length (m) 10 | Cable length (m) 10 |
| Employments | Employments drainage, drying up, slightly dirty waters | Employments drainage, drying up, slightly dirty waters | Employments drainage, drying up, slightly dirty waters | Employments drainage, drying up, slightly dirty waters |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 |
| Height (cm) | Height (cm) 45.8 | Height (cm) 44.2 | Height (cm) 44.2 | Height (cm) 45.8 |
| Weight kg) | Weight kg) 41.4 | Weight kg) 36.9 | Weight kg) 38 | Weight kg) 42.5 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |
