ZXm 2/40 (10m) - VORTEX submersible electric pump for dirty water 0.75 HP
Flow rate up to 400 l/min (24 m³/h). Head up to 11.5 m. 0.55 Kw (0.75 HP) motor. 10 meters of cable with shuko plug.
The ZXm 2/40 pump is recommended for drainage of waste water in the domestic sector, for the evacuation of dirty water, even in the presence of suspended solids with dimensions up to Ø 40 mm.
It stands out for its ease of installation and reliability in fixed installations with automatic operation.
- Motor connection
- SINGLE PHASE
- Motor power (HP)
- 0.75
- Absorption at 230V (A)
- 4
- Capacitor
- 20 µF450 VL
- Delivery port
- 1 "1/2
- Body Pump
- Technopolymer
- Impeller
- Technopolymer
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 25
- Max flow (l./min.)
- 400
- Min head (m.)
- 2
- Max head (m.)
- 11.5
- Cable length (m)
- 10
- Employments
- slightly dirty waters
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 42.2
- Width (cm)
- 17.1
- Weight kg)
- 10.8
- Guarantee
- 2
|
|
|
|
|
Bearings
Pump side motor bearing | 6203 ZZ |
Opposite side engine bearing | 6203 ZZ |
Tree holding
Type of seal | Double mechanical seal in oil chamber |
LM diameter | 14 |
LM fixed ring | Silicon carbide |
LM rotating ring | Graphite |
LM elastomer | NBR |
Shrinkage DN1=450 DN2=350 | MG1-14D SIC |
LP diameter | 14 |
LP fixed ring | Silicon carbide |
LP rotating ring | Silicon carbide |
LP elastomer | NBR |
Materials
1.0 - Pump body | Reinforced technopolymer |
1.4 - Basic | Stainless steel EN 1.4301 (AISI 304) |
3.0 - Impeller | Reinforced technopolymer |
4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
ZXm 2/40 (10m) - VORTEX submersible electric pump for dirty water 0.75 HPThis product Flow rate up to 400 l/min (24 m³/h). Head up to 11.5 m. 0.55 Kw (0.75 HP) motor. 10 meters of cable with shuko plug. | ZXm 1B/40 (10m) - VORTEX submersible electric pump for dirty water 0.70 HPFlow rate up to 350 l/min (21 m³/h). Head up to 9 m. 0.50 Kw (0.70 HP) motor. 10 meters of cable with shuko plug. | ZXm 1A/40 (10m) - VORTEX submersible electric pump for dirty water 0.85 HPFlow rate up to 400 l/min (24 m³/h). Head up to 11 m. 0.60 Kw (0.85 HP) motor. 10 meters of cable with shuko plug. | ZXm 2/30 (10m) - VORTEX submersible electric pump for dirty water 0.75 HPFlow rate up to 320 l/min (19.2 m³/h). Head up to 13 m. 0.55 Kw (0.75 HP) motor. 10 meters of cable with shuko plug. | |
---|---|---|---|---|
Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
Motor power (HP) | Motor power (HP) 0.75 | Motor power (HP) 0.70 | Motor power (HP) 0.85 | Motor power (HP) 0.75 |
Absorption at 230V (A) | Absorption at 230V (A) 4 | Absorption at 230V (A) 3.3 | Absorption at 230V (A) 4.5 | Absorption at 230V (A) 4 |
Capacitor | Capacitor 20 µF450 VL | Capacitor 12.5 µF450 VL | Capacitor 16 µF450 VL | Capacitor 20 µF450 VL |
Delivery port | Delivery port 1 "1/2 | Delivery port 1 "1/2 | Delivery port 1 "1/2 | Delivery port 1 "1/2 |
Body Pump | Body Pump Technopolymer | Body Pump Cast iron | Body Pump Cast iron | Body Pump Technopolymer |
Impeller | Impeller Technopolymer | Impeller Technopolymer | Impeller Technopolymer | Impeller Technopolymer |
Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 25 | Flow rate min. (l./min.) 25 | Flow rate min. (l./min.) 25 | Flow rate min. (l./min.) 25 |
Max flow (l./min.) | Max flow (l./min.) 400 | Max flow (l./min.) 350 | Max flow (l./min.) 400 | Max flow (l./min.) 320 |
Min head (m.) | Min head (m.) 2 | Min head (m.) 1 | Min head (m.) 1.5 | Min head (m.) 2 |
Max head (m.) | Max head (m.) 11.5 | Max head (m.) 9 | Max head (m.) 11 | Max head (m.) 13 |
Cable length (m) | Cable length (m) 10 | Cable length (m) 10 | Cable length (m) 10 | Cable length (m) 10 |
Employments | Employments slightly dirty waters | Employments drainage, drying up, slightly dirty waters | Employments drainage, drying up, slightly dirty waters | Employments slightly dirty waters |
Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 |
Height (cm) | Height (cm) 42.2 | Height (cm) 37.8 | Height (cm) 37.8 | Height (cm) 41.2 |
Width (cm) | Width (cm) 17.1 | Width (cm) -- | Width (cm) -- | Width (cm) 17.1 |
Weight kg) | Weight kg) 10.8 | Weight kg) 11.5 | Weight kg) 11.9 | Weight kg) 10.8 |
Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |