ZXm 2/40 (5m) - VORTEX submersible electric pump for dirty water 0.75 HP
Flow rate up to 400 l/min (24 m³/h). Head up to 11.5 m. 0.55 Kw (0.75 HP) motor. 5 meters of cable with shuko plug.




The ZXm 2/40 pump is recommended for drainage of waste water in the domestic sector, for the evacuation of dirty water, even in the presence of suspended solids with dimensions up to a diameter of 40 millimetres.
It stands out for its ease of installation and reliability in fixed installations with automatic operation.
- Motor connection
- SINGLE PHASE
- Power (Kw)
- 0.55
- Power (HP)
- 0.75
- Absorption at 230V (A)
- 4
- Capacitor
- 20 µF450 VL
- Delivery mouth
- 1 "1/2
- Pump body
- Technopolymer
- Impeller
- Technopolymer
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Min. flow rate (l./min.)
- 25
- Max. flow rate (l./min.)
- 400
- Min. head (m.)
- 2
- Max. head (m.)
- 11.5
- Cable length (m)
- 5
- Jobs
- slightly dirty waters
- Max. liquid temperature (°C)
- 40
- Height (cm)
- 42.2
- Width (cm)
- 17.1
- Weight (Kg)
- 10.8
- Warranty (years)
- 2
|
|
|
|
|

Bearings
Pump side motor bearing | 6203 ZZ |
Opposite side engine bearing | 6203 ZZ |
Tree holding
Type of seal | Double mechanical seal in oil chamber |
LM diameter | 14 |
LM fixed ring | Silicon carbide |
LM rotating ring | Graphite |
LM elastomer | NBR |
Shrinkage DN1=450 DN2=350 | MG1-14D SIC |
LP diameter | 14 |
LP fixed ring | Silicon carbide |
LP rotating ring | Silicon carbide |
LP elastomer | NBR |
Materials
1.0 - Pump body | Reinforced technopolymer |
1.4 - Basic | Stainless steel EN 1.4301 (AISI 304) |
3.0 - Impeller | Reinforced technopolymer |
4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
![]() ZXm 2/40 (5m) - VORTEX submersible electric pump for dirty water 0.75 HPThis product Flow rate up to 400 l/min (24 m³/h). Head up to 11.5 m. 0.55 Kw (0.75 HP) motor. 5 meters of cable with shuko plug. | ![]() ZXm 2/30 (5m) - VORTEX submersible electric pump for dirty water 0.75 HPFlow rate up to 320 l/min (19.2 m³/h). Head up to 13 m. 0.55 Kw (0.75 HP) motor. 5 meters of cable with shuko plug. | |
---|---|---|
Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
Power (Kw) | Power (Kw) 0.55 | Power (Kw) 0.55 |
Power (HP) | Power (HP) 0.75 | Power (HP) 0.75 |
Absorption at 230V (A) | Absorption at 230V (A) 4 | Absorption at 230V (A) 4 |
Capacitor | Capacitor 20 µF450 VL | Capacitor 20 µF450 VL |
Delivery mouth | Delivery mouth 1 "1/2 | Delivery mouth 1 "1/2 |
Pump body | Pump body Technopolymer | Pump body Technopolymer |
Impeller | Impeller Technopolymer | Impeller Technopolymer |
Number of impellers | Number of impellers 1 | Number of impellers 1 |
Crankshaft | Crankshaft AISI 431 stainless steel | Crankshaft AISI 431 stainless steel |
Check valve | Check valve No | Check valve No |
Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 |
Min. flow rate (l./min.) | Min. flow rate (l./min.) 25 | Min. flow rate (l./min.) 25 |
Max. flow rate (l./min.) | Max. flow rate (l./min.) 400 | Max. flow rate (l./min.) 320 |
Min. head (m.) | Min. head (m.) 2 | Min. head (m.) 2 |
Max. head (m.) | Max. head (m.) 11.5 | Max. head (m.) 13 |
Cable length (m) | Cable length (m) 5 | Cable length (m) 5 |
Jobs | Jobs slightly dirty waters | Jobs slightly dirty waters |
Max. liquid temperature (°C) | Max. liquid temperature (°C) 40 | Max. liquid temperature (°C) 40 |
Height (cm) | Height (cm) 42.2 | Height (cm) 41.2 |
Width (cm) | Width (cm) 17.1 | Width (cm) 17.1 |
Weight (Kg) | Weight (Kg) 10.8 | Weight (Kg) 10.8 |
Warranty (years) | Warranty (years) 2 | Warranty (years) 2 |