4BLOCKm 4/9 (20m) - 1 HP single-phase submersible electric pump
Flow rate up to 100 l/min (6 m³/h). Head up to 71 m. 0.75 Kw (1 HP) motor. 20 meters of cable.
Monobloc submersible electric pump in stainless steel ready to install. It is complete with: capacitor, built-in thermal motor protector and 20 meter power cable.
The PEDROLLO 4BLOCKm 4/8 has a flow rate that varies from 20 to 100 litres per minute with a head from 22.5 to 71 metres.
It is recommended for supplying clean water from wells even in the presence of sand up to 150 grams per cubic meter.
Due to its high performance and reliability, it is recommended for use in the domestic sector, for the automatic distribution of water in conjunction with pressure tanks, for irrigation, etc.
- Motor connection
- SINGLE PHASE
- Power (Kw)
- 0.75
- Power (HP)
- 1
- Absorption at 230V (A)
- 6
- Capacitor
- 35 µF450 VL
- Delivery port
- 1 "1/4
- Body Pump
- AISI 304 stainless steel
- Impeller
- Delrin
- Number of impellers
- 8
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 20
- Max flow (l./min.)
- 100
- Min head (m.)
- 20
- Max head (m.)
- 59.5
- Cable length (m)
- 20
- Employments
- water supply, pressurization systems, irrigation
- Liquid temperature max. (° C)
- 35
- Height (cm)
- 74.3
- Outside diameter (cm)
- 10
- Weight kg)
- 13.8
- Guarantee
- 2
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6203 |
| Opposite side engine bearing | 6203 |
Tree holding
| Type of seal | Single Mechanical Seal in oil chamber |
| Engine side model | ST1-16 |
| LM diameter | 16 |
| LM fixed ring | Ceramic |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
Materials
| 1.3 - Delivery body | Stainless steel EN 1.4301 (AISI 304) |
| 2.1 - Seal holder cover | Brass CW617N EN 12165 |
| 3.0 - Impeller | POM acetal resin |
| 4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
| 4.1 - Crankshaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.0 - Stadium box | Stainless steel EN 1.4301 (AISI 304) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 6.2 - Engine sleeve | Stainless steel EN 1.4301 (AISI 304) |
| 7.0 - Lantern | Reinforced technopolymer |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
| 7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
 4BLOCKm 4/9 (20m) - 1 HP single-phase submersible electric pumpThis product Flow rate up to 100 l/min (6 m³/h). Head up to 71 m. 0.75 Kw (1 HP) motor. 20 meters of cable. |  4BLOCKm 4/7 (20m) - 0.75 HP single-phase submersible electric pumpFlow rate up to 100 l/min (6 m³/h). Head up to 55 m. 0.55 Kw (0.75 HP) motor. 20 meters of cable. |  4BLOCKm 4/13 (20m) - Single-phase submersible electric pump 1.5 HPFlow rate up to 100 l/min (6 m³/h). Head up to 102 m. 1.1 Kw (1.5 HP) motor. 20 meters of cable. |  4BLOCKm 6/3 (20m) - Single-phase submersible electric pump 0.50 HPFlow rate up to 150 l/min (9 m³/h). Head up to 19.5 m. 0.37 Kw (0.50 HP) motor. 20 meters of cable. | |
|---|---|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Power (Kw) | Power (Kw) 0.75 | Power (Kw) 0.55 | Power (Kw) 1.1 | Power (Kw) 0.37 |
| Power (HP) | Power (HP) 1 | Power (HP) 0.75 | Power (HP) 1.5 | Power (HP) 0.50 |
| Absorption at 230V (A) | Absorption at 230V (A) 6 | Absorption at 230V (A) 5 | Absorption at 230V (A) 8 | Absorption at 230V (A) 5 |
| Capacitor | Capacitor 35 µF450 VL | Capacitor 20 µF450 VL | Capacitor 35 µF450 VL | Capacitor 20 µF450 VL |
| Delivery port | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/4 |
| Body Pump | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel |
| Impeller | Impeller Delrin | Impeller Lexan | Impeller Delrin | Impeller Delrin |
| Number of impellers | Number of impellers 8 | Number of impellers 6 | Number of impellers 13 | Number of impellers 3 |
| Pump shaft | Pump shaft -- | Pump shaft AISI 304 stainless steel | Pump shaft AISI 304 stainless steel | Pump shaft AISI 304 stainless steel |
| Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
| Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 25 |
| Max flow (l./min.) | Max flow (l./min.) 100 | Max flow (l./min.) 100 | Max flow (l./min.) 100 | Max flow (l./min.) 150 |
| Min head (m.) | Min head (m.) 20 | Min head (m.) 15 | Min head (m.) 32.5 | Min head (m.) 6 |
| Max head (m.) | Max head (m.) 59.5 | Max head (m.) 44.5 | Max head (m.) 97 | Max head (m.) 19 |
| Cable length (m) | Cable length (m) 20 | Cable length (m) 20 | Cable length (m) 20 | Cable length (m) 20 |
| Employments | Employments water supply, pressurization systems, irrigation | Employments water supply, pressurization systems, irrigation | Employments water supply, pressurization systems, irrigation | Employments water supply, pressurization systems, irrigation |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 35 | Liquid temperature max. (° C) 35 | Liquid temperature max. (° C) 35 | Liquid temperature max. (° C) 35 |
| Height (cm) | Height (cm) 74.3 | Height (cm) 67.4 | Height (cm) 92.5 | Height (cm) 64.1 |
| Outside diameter (cm) | Outside diameter (cm) 10 | Outside diameter (cm) 10.1 | Outside diameter (cm) 10 | Outside diameter (cm) 10 |
| Weight kg) | Weight kg) 13.8 | Weight kg) 12.1 | Weight kg) 17 | Weight kg) 10.7 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |
Related Products
-
Brio Top 2.0 - Electronic...
For pumps up to 3 HP. With 1" male connection. With pressure gauge. With auto reset.
€105.69Restart pressure (bar) from 0.5 to 8 bar Line current 16 A Motor phase current 16 A Attack size 1 " Type of attack male -
PRESFLO MULTI - Electronic...
For pumps up to 2 HP. Inlet port 1" M. Outlet port 1" F . Without pressure gauge. With...
€223.26Restart pressure (bar) 2 bars Line current 16 A Motor phase current 16 A Attack size 1 " Type of attack male Female
Reviews (2) - Review moderation
j'ai commandé cette pompe le 30 juin. Le 1er juillet je reçois un mail du transporteur avec le numéro de colis. Mais le transporteur n'a pas reçu ce colis. Injoignable par téléphone. Mail adressé à Prato Erboso le 08 juillet...suis en attente d'une réponse... qqu'un a t il connu le même sort ? Si oui, est-ce résolu positivement ? Comment avez-vous procédé ? Merci à vous
Réception rapide du produit conforme à mes attentes. Installée très rapidement en remplacement du même modèle qui a duré 11 ans sans soucis particulier. Pompe monobloc indémontable donc remplacée. Merci !
