6SR36/5 - PD - 7.5 HP three-phase submersible electric pump
Flow rate up to 800 l/min (48 m³/h). Head up to 62.5 m. 5.5 Kw (7.5 HP) motor.
The 6SR36/5 - PD electric pump by Pedrollo is suitable for use in the civil and agricultural sectors.
The special feature of this pump is the construction of the impellers and diffusers made in such a way as to resist abrasion caused by sand. The pump allows the pumping of water with sand content up to 100 grams per cubic meter.
The 6SR36/5 - PD is suitable for diversified applications such as industrial, municipal and agricultural water needs, for water distribution in conjunction with pressure tanks, for irrigation, for pressure boosting and for fire-fighting systems.
The pump can be installed in wells with diameters greater than 6 inches and up to 200 meters deep.
It is equipped with a rewindable oil-bath PD motor.
The 6SR36/5 - PD has a flow rate ranging from 100 to 800 litres per minute with a head of 21 to 62.5 metres.
It must be powered by a three-phase voltage, has a horsepower of 7.5 HP and the temperature of the liquid to be pumped goes up to +35 degrees centigrade.
The 6SR36/5 - PD has a body made of cast iron, impellers in noryl and the pump shaft in AISI 304 stainless steel. The use of these materials makes the pump resistant, robust and allows it to last over time.
The 4-meter long power cable is supplied.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 5.5
- Power (HP)
- 7.5
- Delivery port
- 3 "
- Body Pump
- Cast iron
- Impeller
- Noryl
- Number of impellers
- 5
- Pump shaft
- AISI 304 stainless steel
- Flow rate min. (l./min.)
- 100
- Max flow (l./min.)
- 800
- Min head (m.)
- 14
- Max head (m.)
- 14
- Employments
- water supply, pressurization systems, irrigation, fire prevention systems
- Liquid temperature max. (° C)
- +35°C
- Motor voltage
- 400 V
- Height (cm)
- 141.8
- Outside diameter (cm)
- 149.5
- Weight kg)
- 55.4
- Guarantee
- 2
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump bearing - fixed part | Anti-friction polymer |
| Pump bearing - rotating part | Sintered AISI 316 steel with ceramic coating |
Tree holding
Materials
| 1.3 - Delivery body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
| 4.2 - Towing joint | Stainless steel EN 1.4021 (AISI 420) |
| 5.0 - Stadium box | Stainless steel EN 1.4301 (AISI 304) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 7.0 - Lantern | Cast iron GJL 200 EN 1561 |
| 7.1 - Check Valve | Stainless steel EN 1.4301 (AISI 304) |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
| 7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
 6SR36/5 - PD - 7.5 HP three-phase submersible electric pumpThis product Flow rate up to 800 l/min (48 m³/h). Head up to 62.5 m. 5.5 Kw (7.5 HP) motor. |  PA-EZP-F2 - 1" assembled sump, 2 zonesTORO Irrigazione components. 24V valves. With inlet filter. |  4SR 1.5 / 11 F-PD - 0.75 HP three-phase submersible electric pumpFlow rate up to 45 l / min (2.7 m³ / h). Head up to 81 meters. 0.50 Kw (0.75 HP) engine. | |
|---|---|---|---|
| Motor connection | Motor connection THREE-PHASE | Motor connection -- | Motor connection THREE-PHASE |
| Power (Kw) | Power (Kw) 5.5 | Power (Kw) -- | Power (Kw) -- |
| Power (HP) | Power (HP) 7.5 | Power (HP) -- | Power (HP) 0.75 |
| Absorption at 400V (A) | Absorption at 400V (A) -- | Absorption at 400V (A) -- | Absorption at 400V (A) 2.0 |
| Delivery port | Delivery port 3 " | Delivery port -- | Delivery port 1 "1/4 |
| Body Pump | Body Pump Cast iron | Body Pump -- | Body Pump AISI 304 stainless steel |
| Impeller | Impeller Noryl | Impeller -- | Impeller Delrin |
| Number of impellers | Number of impellers 5 | Number of impellers -- | Number of impellers 11 |
| Pump shaft | Pump shaft AISI 304 stainless steel | Pump shaft -- | Pump shaft -- |
| Check valve | Check valve -- | Check valve -- | Check valve Yes |
| Degree of protection | Degree of protection -- | Degree of protection -- | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 100 | Flow rate min. (l./min.) -- | Flow rate min. (l./min.) 5 |
| Max flow (l./min.) | Max flow (l./min.) 800 | Max flow (l./min.) -- | Max flow (l./min.) 45 |
| Min head (m.) | Min head (m.) 14 | Min head (m.) -- | Min head (m.) 28 |
| Max head (m.) | Max head (m.) 14 | Max head (m.) -- | Max head (m.) 81 |
| Number of zones | Number of zones -- | Number of zones 2 | Number of zones -- |
| Cable length (m) | Cable length (m) -- | Cable length (m) -- | Cable length (m) 2 |
| Employments | Employments water supply, pressurization systems, irrigation, fire prevention systems | Employments -- | Employments water supply, pressurization systems, irrigation |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) +35°C | Liquid temperature max. (° C) -- | Liquid temperature max. (° C) 35 |
| Motor voltage | Motor voltage 400 V | Motor voltage -- | Motor voltage -- |
| Height (cm) | Height (cm) 141.8 | Height (cm) -- | Height (cm) 71.3 |
| Outside diameter (cm) | Outside diameter (cm) 149.5 | Outside diameter (cm) -- | Outside diameter (cm) 9.8 |
| Weight kg) | Weight kg) 55.4 | Weight kg) -- | Weight kg) 11.5 |
| Guarantee | Guarantee 2 | Guarantee -- | Guarantee 2 |
