NKm 2/6-GE (10m) - submersible electric Pump single-phase with float switch
Flow rate up to 80 l/min (4.8 m3/h). Head up to 95 m. Motor 1.5 Kw (2 HP). 10 metres of cable.
The submersible pump PEDROLLO NKm 2/6-GE is recommended for pumping clean water with sand content not exceeding 50 g/m3.
For the high efficiency and reliability, they are recommended for pumping clean water in domestic, civil, agricultural, for the distribution of water in combination with autoclaves, for irrigation of orchards and gardens, for raising pressure, etc.,
- Motor connection
- SINGLE PHASE
- Motor power (HP)
- 2
- Absorption at 230V (A)
- 8.8
- Capacitor
- 35 µF450 VL
- Delivery port
- 1 "1/4
- Body Pump
- AISI 304 stainless steel
- Impeller
- Noryl
- Number of impellers
- 6
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 10
- Max flow (l./min.)
- 80
- Min head (m.)
- 48
- Max head (m.)
- 95
- Cable length (m)
- 10
- Employments
- water supply, pressurization systems, irrigation
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 61.7
- Outside diameter (cm)
- 13.5
- Weight kg)
- 19.8
- Guarantee
- 2
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6303 2RS - C3 |
| Opposite side engine bearing | 6203 ZZ - C3E |
Tree holding
| Type of seal | Double mechanical seal in oil chamber |
| Engine side model | STA-17 |
| LM diameter | 17 |
| LM fixed ring | Ceramic |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | ST1-16 |
| LP diameter | 16 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Graphite |
| LP elastomer | NBR |
Materials
| 2.1 - Seal holder cover | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 5.3 - Diaphragm/Diffuser Cover | Stainless steel EN 1.4301 (AISI 304) |
| 6.2 - Engine sleeve | Stainless steel EN 1.4301 (AISI 304) |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
 NKm 2/6-GE (10m) - submersible electric Pump single-phase with float switchThis product Flow rate up to 80 l/min (4.8 m3/h). Head up to 95 m. Motor 1.5 Kw (2 HP). 10 metres of cable. |  NKm 2/5-GE (10m) - submersible electric Pump single-phase with float switchFlow rate up to 80 l/min (4.8 m3/h). Prevalence of up to 81 m. Motor 1.1 Kw (1.5 HP). 10 metres of cable. |  NKm 4/3-GE (10m) - submersible electric Pump single-phase with float switchFlow rate up to 120 l/min (7.2 m3/h). Head up to 40 m. Motor 0.55 Kw (0.75 HP). 10 metres of cable. |  NKm 4/4-GE (10m) - submersible electric Pump single-phase with float switchFlow rate up to 120 l/min (7.2 m3/h). Head up to 53 m. Motor 0.75 Kw (1 HP). 10 metres of cable. | |
|---|---|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Motor power (HP) | Motor power (HP) 2 | Motor power (HP) 1.5 | Motor power (HP) 0.75 | Motor power (HP) 1 |
| Absorption at 230V (A) | Absorption at 230V (A) 8.8 | Absorption at 230V (A) 7.6 | Absorption at 230V (A) 5 | Absorption at 230V (A) 6.2 |
| Capacitor | Capacitor 35 µF450 VL | Capacitor 25 µF450 VL | Capacitor 16 µF450 VL | Capacitor 20 µF450 VL |
| Delivery port | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/4 |
| Body Pump | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel |
| Impeller | Impeller Noryl | Impeller Noryl | Impeller Noryl | Impeller Noryl |
| Number of impellers | Number of impellers 6 | Number of impellers 5 | Number of impellers 3 | Number of impellers 4 |
| Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
| Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
| Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 10 | Flow rate min. (l./min.) 10 | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 |
| Max flow (l./min.) | Max flow (l./min.) 80 | Max flow (l./min.) 80 | Max flow (l./min.) 120 | Max flow (l./min.) 120 |
| Min head (m.) | Min head (m.) 48 | Min head (m.) 40 | Min head (m.) 12 | Min head (m.) 16 |
| Max head (m.) | Max head (m.) 95 | Max head (m.) 81 | Max head (m.) 40 | Max head (m.) 53 |
| Cable length (m) | Cable length (m) 10 | Cable length (m) 10 | Cable length (m) 10 | Cable length (m) 10 |
| Employments | Employments water supply, pressurization systems, irrigation | Employments irrigation | Employments water supply, pressurization systems, irrigation | Employments water supply, pressurization systems, irrigation |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 |
| Height (cm) | Height (cm) 61.7 | Height (cm) 57 | Height (cm) 48.6 | Height (cm) 54.3 |
| Outside diameter (cm) | Outside diameter (cm) 13.5 | Outside diameter (cm) 13.5 | Outside diameter (cm) 13.5 | Outside diameter (cm) 13.5 |
| Weight kg) | Weight kg) 19.8 | Weight kg) 17.5 | Weight kg) 14.5 | Weight kg) 16.1 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |
Related Products
-
-
EASYPRESS-BLU - Electronic...
Restart pressure: 1.5 bar. With pressure gauge. With automatic reset. For pumps up to 2 HP.
€109.80Restart pressure (bar) 1.5 Line current 16 A Motor phase current 16 A Attack size 1 " Type of attack male -
Brio Top 2.0 - Electronic...
For pumps up to 3 HP. With 1" male connection. With pressure gauge. With auto reset.
€105.69Restart pressure (bar) from 0.5 to 8 bar Line current 16 A Motor phase current 16 A Attack size 1 " Type of attack male
Reviews (1) - Review moderation
Update: Il team di Pratoerboso mi ha contattato con estrema rapidità. Ci sono stati problemi nella spedizione/approvigionamento del prodotto, che dunque non è mai partito... Mi è stato concesso un rimborso, effettivamente ricevuto nell'arco di 2-3 giorni lavorativi. Conclusione: prodotto non ricevuto (ho rinunciato e chiesto un rimborso) e nessuna spiegazione da Pratoerboso finché non mi sono mosso io per chiedere informazioni. Rapido nella risposta e nell'erogazione del rimborso il team di Pratoerboso. Voto finale: 3/5.__________________________________ Messaggio originale:Ordine piazzato (e pagato) il 19 Aprile. Sostenete di aver spedito il prodotto il giorno 20 Aprile, ma dopo 9 giorni lo status del tracking TNT è ancora in "Spedizione non ancora affidata a TNT"...Desidero spiegazioni.
