UPm 8/3-GE (10m) - Single-phase submersible electric pump with float
zoom_out_map
chevron_left chevron_right

UPm 8/3-GE (10m) - Single-phase submersible electric pump with float

Flow rate up to 180 l/min (10.8 m³/h). Head up to 40 m. 1.1 Kw (1.5 HP) motor.

€658.80

€540.00 Tax excluded

Variants:
UPm 8/3-GE (10m) - Elettropompa sommersa monofase con galleggiante
UPm 8/4-GE (10m) - Elettropompa sommersa monofase con galleggiante
There are no reviews yet
Close
Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

UPm 8/3-GE (10m) - Single-phase submersible electric pump with float
  • Use dot instead of comma

Loading

Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
We supply all spare parts on this product.
Description

The main feature of the UP submersible electric pump is the impossibility of blocking even after long periods of inactivity, thanks to innovative patented technical solutions.

The UP subverts the classic design standards of 5” submersible pumps. In fact, compared to pumps of the same type, it is built in the opposite way, that is, with the motor in the lower part, with the hydraulic section placed in the upper part (hence the name UP).
Among its revolutionary strengths are its greater compactness and a system of independent floating impellers that allows it to pump clean water with a maximum sand content of up to 150 g/m³, the only one in the world of 5”.

Furthermore, the UP features reduced consumption, a valve that eliminates the “bell effect” to facilitate the expulsion of air bubbles that can form inside the pump and the raised suction grid, not placed on the bottom, to prevent the passage of sand, leaves and other foreign bodies that could clog the hydraulics and therefore reduce performance.
The UP is equipped with a forced flushing system for the mechanical seal lubrication oil and is available in versions with or without float. It can operate in both vertical and horizontal positions.

Due to its high performance and reliability, it is recommended for pumping clean water in the domestic, civil and agricultural sectors, for irrigating vegetable gardens and gardens, for boosting pressure, etc.

Data sheet
Pedrollo
UPm 8/4-GE 10m
9 Items
Motor connection
SINGLE PHASE
Motor power (HP)
1.5
Absorption at 230V (A)
7.6
Capacitor
25 µF450 VL
Delivery port
1 "1/4
Body Pump
AISI 304 stainless steel
Impeller
Noryl
Number of impellers
3
Motor shaft
AISI 431 stainless steel
Check valve
no
Degree of protection
IP 68
Flow rate min. (l./min.)
40
Max flow (l./min.)
180
Min head (m.)
9
Max head (m.)
40
Cable length (m)
20
Employments
water supply, pressurization systems, irrigation
Liquid temperature max. (° C)
40
Height (cm)
45.5
Outside diameter (cm)
15
Weight kg)
15.4
Guarantee
2
Attachments

UP technical sheet

Models, performance curves and construction features of Pedrollo UP series pumps.

file_download Download (900.8KB)

Buy it with

  • UPm 8/3-GE (10m) - Single-phase submersible electric pump with float
  • +
  • UP 8/4 (10m) - submersible electric Pump three-phase 400 V
  • +
  • UPm 4/5-GE (10m) - submersible electric Pump single-phase with float switch
  • €2,013.00-10 %
    Total price: €1,811.70
GE UPm models and performance
GUY
three-phase
UPm 2/2-GE
UPm 2/3-GE
UPm 2/4-GE
UPm 2/5-GE
UPm 2/6-GE
UPm 4/3-GE
UPm 4/4-GE
UPm 4/5-GE
UPm 4/6-GE
UPm 8/3-GE
UPm 8/4-GE
POWER
KWHP
0.370.50
0.550.75
0.751
1.11.5
1.52
0.550.75
0.751
1.11.5
1.52
1.11.5
1.52
Construction data UP2
Cutaway of UP pumps
Bearings
Pump side motor bearing6303 2RS - C3
Opposite side engine bearing6203 ZZ - C3E
Tree holding
Type of sealDouble mechanical seal in oil chamber
Engine side modelSTA-17
LM diameter17
LM fixed ringCeramic
LM rotating ringGraphite
LM elastomerNBR
Shrinkage DN1=450 DN2=350ST1-16
LP diameter16
LP fixed ringSilicon carbide
LP rotating ringGraphite
LP elastomerNBR
Materials
2.1 - Seal holder coverStainless steel EN 1.4301 (AISI 304)
3.0 - ImpellerReinforced technopolymer
4.0 - Pump shaftStainless steel EN 1.4057 (AISI 431)
5.1 - DiffuserReinforced technopolymer
5.3 - Diaphragm/Diffuser CoverStainless steel EN 1.4301 (AISI 304)
6.2 - Engine sleeveStainless steel EN 1.4301 (AISI 304)
7.2 - Pump shirtStainless steel EN 1.4301 (AISI 304)
7.3 - Cable coverStainless steel EN 1.4301 (AISI 304)

Compare with Similar Products

UPm 8/3-GE (10m) - Single-phase submersible electric pump with float

UPm 8/3-GE (10m) - Single-phase submersible electric pump with float

This product

Flow rate up to 180 l/min (10.8 m³/h). Head up to 40 m. 1.1 Kw (1.5 HP) motor.

UPm 4/5-GE (10m) - submersible electric Pump single-phase with float

UPm 4/5-GE (10m) - submersible electric Pump single-phase with float switch

Quick View

Flow rate up to 120 l/min (7.2 m3/h). Prevalence of up to 67 m. Motor 1.1 Kw (1.5 HP). 10 metres of cable.

UPm 4/6-GE (10m) - submersible electric Pump single-phase with float

UPm 4/6-GE (10m) - submersible electric Pump single-phase with float switch

Quick View

Flow rate up to 120 l/min (7.2 m3/h). Head up to 80 m. Motor 1.5 Kw (2 HP). 10 metres of cable.

UPm 8/4-GE (10m) - submersible electric Pump single-phase with float

UPm 8/4-GE (10m) - submersible electric Pump single-phase with float switch

Quick View

Flow rate up to 180 l/min (10.8 m3/h). Head up to 52 m. Motor 1.5 Kw (2 HP). 10 metres of cable.

Motor connection Motor connection SINGLE PHASE Motor connection SINGLE PHASE Motor connection SINGLE PHASE Motor connection SINGLE PHASE
Motor power (HP) Motor power (HP) 1.5 Motor power (HP) 1.5 Motor power (HP) 2 Motor power (HP) 2
Absorption at 230V (A) Absorption at 230V (A) 7.6 Absorption at 230V (A) 7.2 Absorption at 230V (A) 8.7 Absorption at 230V (A) 8.8
Capacitor Capacitor 25 µF450 VL Capacitor 25 µF450 VL Capacitor 35 µF450 VL Capacitor 35 µF450 VL
Delivery port Delivery port 1 "1/4 Delivery port 1 "1/4 Delivery port 1 "1/4 Delivery port 1 "1/4
Body Pump Body Pump AISI 304 stainless steel Body Pump AISI 304 stainless steel Body Pump AISI 304 stainless steel Body Pump AISI 304 stainless steel
Impeller Impeller Noryl Impeller Noryl Impeller Noryl Impeller Noryl
Number of impellers Number of impellers 3 Number of impellers 5 Number of impellers 6 Number of impellers 4
Motor shaft Motor shaft AISI 431 stainless steel Motor shaft AISI 431 stainless steel Motor shaft AISI 431 stainless steel Motor shaft AISI 431 stainless steel
Check valve Check valve no Check valve no Check valve no Check valve no
Degree of protection Degree of protection IP 68 Degree of protection IP 68 Degree of protection IP 68 Degree of protection IP 68
Flow rate min. (l./min.) Flow rate min. (l./min.) 40 Flow rate min. (l./min.) 10 Flow rate min. (l./min.) 20 Flow rate min. (l./min.) 40
Max flow (l./min.) Max flow (l./min.) 180 Max flow (l./min.) 120 Max flow (l./min.) 120 Max flow (l./min.) 180
Min head (m.) Min head (m.) 9 Min head (m.) 20 Min head (m.) 24 Min head (m.) 12
Max head (m.) Max head (m.) 40 Max head (m.) 67 Max head (m.) 80 Max head (m.) 52
Cable length (m) Cable length (m) 20 Cable length (m) 10 Cable length (m) 10 Cable length (m) 10
Employments Employments water supply, pressurization systems, irrigation Employments water supply, pressurization systems, irrigation Employments water supply, pressurization systems, irrigation Employments water supply, pressurization systems, irrigation
Liquid temperature max. (° C) Liquid temperature max. (° C) 40 Liquid temperature max. (° C) 40 Liquid temperature max. (° C) 40 Liquid temperature max. (° C) 40
Height (cm) Height (cm) 45.5 Height (cm) 50.9 Height (cm) 55.6 Height (cm) 50.2
Outside diameter (cm) Outside diameter (cm) 15 Outside diameter (cm) 15 Outside diameter (cm) 15 Outside diameter (cm) 15
Weight kg) Weight kg) 15.4 Weight kg) 17.2 Weight kg) 19.5 Weight kg) 17.7
Guarantee Guarantee 2 Guarantee 2 Guarantee 2 Guarantee 2