TIGm 1.1 - Submersible electric pump with single-phase grinder 1.5 HP
Flow rate up to 150 l/min (9 m³/h). Head up to 24 m. 1.1 Kw (1.5 HP) motor.
Delivery Options
| Carrier | Description | Estimated Delivery | |
|---|---|---|---|
 | Mail Boxes - 2 giorni | This courier delivers within 48 hours from the moment we entrust the products to him. | Friday 23 October - Monday 26 October |
 | Poste Italiane - 2 giorni Italia | This courier delivers within 24/48 hours from the moment we entrust them with the products. | Friday 23 October - Monday 26 October |
 | Poste Italiane - 3 giorni punto di ritiro | This courier delivers within 24/72 hours from the moment we entrust them with the products. | Friday 23 October |
Carrier: Mail Boxes - 2 giorni
Description: This courier delivers within 48 hours from the moment we entrust the products to him.
Estimated delivery:
Friday 23 October - Monday 26 October
Carrier: Poste Italiane - 2 giorni Italia
Description: This courier delivers within 24/48 hours from the moment we entrust them with the products.
Estimated delivery:
Friday 23 October - Monday 26 October
Carrier: Poste Italiane - 3 giorni punto di ritiro
Description: This courier delivers within 24/72 hours from the moment we entrust them with the products.
Estimated delivery:
Friday 23 October
The Pedrollo TIGm 1.1 single-phase grinder pump is equipped with a high-resistance tempered stainless steel grinder.
The pump is equipped with a 10 meter cable, it can be immersed up to 5 meters underwater.
The TIGm 1.1 allows for the complete shredding of solid bodies and fibres contained in waste water and waste water in the domestic and civil sectors, for conveyance under pressure into the sewer system through small diameter pipes.
It has a flow rate that varies from 20 to 150 litres per minute with a head of 2 to 24 metres.
It must be powered by a single-phase voltage, has a horsepower of 1.5 HP and the temperature of the liquid to be pumped ranges from -15 degrees centigrade up to +40.
It has an IP68 certification which is safe from dust and water ingress.
The TIGm 1.1 is equipped with an external electrical panel for greater operational safety thanks to the special capacitor that significantly increases the torque. The panel includes a manually resettable motor protection switch.
The pump is made of materials such as cast iron and stainless steel which give the pump good resistance and allow it to last over time.
- Jobs
- slightly dirty waters, drainage, drying up
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 1.1
- Power (HP)
- 1.5
- Absorption at 230V (A)
- 6.7
- Pump body
- Cast iron
- Impeller
- Technopolymer
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Minimum flow rate (l./min.)
- 20
- Max. flow rate (l./min.)
- 150
- Min. head (m.)
- 2
- Max. head (m.)
- 24
- Max. liquid temperature (°C)
- +40°C
- Cable length (m.)
- 10
- Degree of protection
- IP 68
- Delivery mouth
- 1" 1/2
- Height (cm)
- 43.2
- Width (cm)
- 19.5
- Depth (cm)
- 24.0
- Weight (Kg)
- 18.3
- Warranty (years)
- 2
Use and formulation of products
- Jobs
- drainage, drying up, slightly dirty waters
Engine and mechanical performance
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 1.1
- Power (HP)
- 1.5
- Absorption at 230V (A)
- 6.7
Pump components and construction
- Pump body
- Cast iron
- Impeller
- Technopolymer
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
Hydraulic performance and filtration
- Minimum flow rate (l./min.)
- 20
- Max. flow rate (l./min.)
- 150
- Min. head (m.)
- 2
- Max. head (m.)
- 24
Liquids and pumping conditions
- Max. liquid temperature (°C)
- +40°C
Power supply and electrical parameters
- Cable length (m.)
- 10
Safety and protection
- Degree of protection
- IP 68
Installation and connections
- Delivery mouth
- 1" 1/2
Dimensions and weight
- Height (cm)
- 43.2
- Width (cm)
- 19.5
- Depth (cm)
- 24.0
- Weight (Kg)
- 18.3
Packaging, maintenance, and warranty
- Warranty (years)
- 2
Construction
Bearings
| Pump side motor bearing | 6303 2RS-C3 |
| Opposite side engine bearing | 6203 ZZ-C3E |
Tree seal
| Type of seal | Double Mechanical Seal in oil chamber |
| LM diameter | 14 |
| LM fixed ring | Silicon Carbide |
| LM rotating ring | Graphite |
| LM Elastomer | NBR |
| Narrowing DN1=450 DN2=350 | MG1-14D SIC |
| LP diameter | 14 |
| LP fixed ring | Silicon Carbide |
| LP Rotating Ring | Silicon Carbide |
| LP Elastomer | NBR |
Materials
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Technopolymer |
| 3.2 - Shredder | Stainless steel EN 1.4125 (AISI 440C) hardened |
| 4.0 - Pump Tree | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Engine carrier | Stainless steel EN 1.4301 (AISI 304) |
| 7.0 - Lantern | Cast iron GJL 200 EN 1561 |
Compare with Similar Products
 TIGm 1.1 - Submersible electric pump with single-phase grinder 1.5 HPThis product Flow rate up to 150 l/min (9 m³/h). Head up to 24 m. 1.1 Kw (1.5 HP) motor. |  NKm 2/2-GE (10m) - Single-phase submersible electric pump with float switch, 0.50 HP Flow rate up to 80 l/min (4.8 m³/h). Head up to 33 m. 0.37 kW (0.50 HP) motor. 10 m cable. |  4SR 1.5/22 S-PD - 1.5 HP three-phase submersible electric pump Flow rate up to 45 l/min (2.7 m³/h). Head up to 158 meters. 1.1 kW (1.5 HP) motor. | |
|---|---|---|---|
| Price | Price €982.10 -45% €540.16 | Price €651.48 -42% €377.86 | Price €813.74 -45% €447.56 |
| Jobs | Jobs slightly dirty waters, drainage, drying up | Jobs water supply, pressurization systems, irrigation | Jobs irrigation |
| Motor connection | Motor connection SINGLE-PHASE | Motor connection SINGLE-PHASE | Motor connection THREE-PHASE |
| Power (Kw) | Power (Kw) 1.1 | Power (Kw) 0.37 | Power (Kw) 1.1 |
| Power (HP) | Power (HP) 1.5 | Power (HP) 0.50 | Power (HP) 1.5 |
| Absorption at 230V (A) | Absorption at 230V (A) 6.7 | Absorption at 230V (A) 4.3 | Absorption at 230V (A) -- |
| Capacitor | Capacitor -- | Capacitor 16 µF 450 VL | Capacitor -- |
| Pump body | Pump body Cast iron | Pump body AISI 304 stainless steel | Pump body -- |
| Impeller | Impeller Technopolymer | Impeller Noryl | Impeller -- |
| Number of impellers | Number of impellers 1 | Number of impellers 2 | Number of impellers -- |
| Crankshaft | Crankshaft AISI 431 stainless steel | Crankshaft AISI 431 stainless steel | Crankshaft -- |
| Check valve | Check valve No | Check valve No | Check valve -- |
| Minimum flow rate (l./min.) | Minimum flow rate (l./min.) 20 | Minimum flow rate (l./min.) 10 | Minimum flow rate (l./min.) 5 |
| Max. flow rate (l./min.) | Max. flow rate (l./min.) 150 | Max. flow rate (l./min.) 80 | Max. flow rate (l./min.) 45 |
| Min. head (m.) | Min. head (m.) 2 | Min. head (m.) 16.4 | Min. head (m.) 52.5 |
| Max. head (m.) | Max. head (m.) 24 | Max. head (m.) 33 | Max. head (m.) 158 |
| Max. liquid temperature (°C) | Max. liquid temperature (°C) +40°C | Max. liquid temperature (°C) +40°C | Max. liquid temperature (°C) -- |
| Cable length (m.) | Cable length (m.) 10 | Cable length (m.) 10 | Cable length (m.) 2 |
| Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
| Delivery mouth | Delivery mouth 1" 1/2 | Delivery mouth 1" 1/4 | Delivery mouth 1" 1/4 |
| Height (cm) | Height (cm) 43.2 | Height (cm) 45.9 | Height (cm) -- |
| Width (cm) | Width (cm) 19.5 | Width (cm) -- | Width (cm) -- |
| Depth (cm) | Depth (cm) 24.0 | Depth (cm) -- | Depth (cm) -- |
| External diameter (cm) | External diameter (cm) -- | External diameter (cm) 13.5 | External diameter (cm) -- |
| Weight (Kg) | Weight (Kg) 18.3 | Weight (Kg) 13 | Weight (Kg) 17 |
| Warranty (years) | Warranty (years) 2 | Warranty (years) 2 | Warranty (years) 2 |