-48%Out-of-Stock

VX 15/35 - 1.5 HP three-phase VORTEX electric pump for waste water OFFER

Flow rate up to 500 l/min (30 m³/h). Head up to 14 m. 1.1 kW (1.5 HP) motor.

€318.47 Tax included

€261.04 Tax excluded

€612.44-48%

block Out-of-Stock
There are no reviews yet
Close
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
We supply all spare parts on this product.
Description

The Pedrollo VX 15/35 electric pump is the ideal solution when the working conditions and required performance are demanding.

Recommended for domestic, civil, and industrial use. It is recommended for draining flooded areas such as basements, underground parking lots, car wash areas, for domestic wastewater, emptying cesspits, and disposing of sewage.

The Vortex impeller of the VX 15/35 allows the pumping of solids with a diameter of up to 50 millimetres and, thanks to its special geometry, guarantees safe operation against clogging.

The flow rate ranges from 50 to 550 litres per hour and the head ranges from 2 to 14 metres.

The electric pump can be installed up to 5 meters below the water level.

The supplied power cable is 10 meters long.

Data sheet
Pedrollo
VX 15/35 10MT-OFFERTA
Jobs
drainage, drying up, slightly dirty waters
Motor connection
THREE-PHASE
Power (Kw)
1.5
Power (HP)
1.5
Current consumption at 400V (A)
3
Pump body
Cast iron
Impeller
AISI 304 stainless steel
Number of impellers
1
Crankshaft
AISI 431 stainless steel
Check valve
No
Minimum flow rate (l./min.)
50
Max. flow rate (l./min.)
500
Min. head (m.)
2
Max. head (m.)
14
Max. liquid temperature (°C)
+40°C
Cable length (m.)
10
Degree of protection
IP 68
Delivery mouth
1" 1/2
Height (cm)
42.1
Width (cm)
24.3
Weight (Kg)
14.5
Warranty (years)
2
Data sheet

Use and formulation of products

Jobs
drainage, drying up, slightly dirty waters

Engine and mechanical performance

Motor connection
THREE-PHASE
Power (Kw)
1.5
Power (HP)
1.5
Current consumption at 400V (A)
3

Pump components and construction

Pump body
Cast iron
Impeller
AISI 304 stainless steel
Number of impellers
1
Crankshaft
AISI 431 stainless steel
Check valve
No

Hydraulic performance and filtration

Minimum flow rate (l./min.)
50
Max. flow rate (l./min.)
500
Min. head (m.)
2
Max. head (m.)
14

Liquids and pumping conditions

Max. liquid temperature (°C)
+40°C

Power supply and electrical parameters

Cable length (m.)
10

Safety and protection

Degree of protection
IP 68

Installation and connections

Delivery mouth
1" 1/2

Dimensions and weight

Height (cm)
42.1
Width (cm)
24.3
Weight (Kg)
14.5

Packaging, maintenance, and warranty

Warranty (years)
2