6SR44/25 - PSR - 40 HP three-phase submersible electric pump
Flow rate up to 1000 l/min (60 m³/h). Head up to 310 m. 30 Kw (40 HP) motor.
The 6SR44/25 - PSR electric pump by Pedrollo is designed and built with the aim of providing good performance and at the same time a solid construction.
Equipped with impellers and diffusers made of special materials that can resist abrasion caused by sand. It supports pumping water for pumping with sand content not exceeding 100 grams per cubic meter.
The 6SR44/25 - PSR is recommended for use in the domestic, civil and agricultural sectors, in particular for the distribution of water in conjunction with pressure tanks, for irrigation, for pressure boosting and for fire-fighting systems.
The installation can be carried out up to 150 meters below the water level, thanks to the PSR engine and in wells with a diameter greater than 6 inches.
The flow rate varies from 200 to 1000 litres per minute with a head of 49 to 310 metres.
It must be powered by a three-phase voltage, has a horsepower of 40 HP and the temperature of the liquid to be pumped goes up to +35 degrees centigrade.
The 6SR44/25 - PSR is made of a mix of cast iron, AISI 304 stainless steel and noryl. Pedrollo has used this mix of materials to create a robust product that resists work and wear.
The 4-meter long power cable is supplied.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 22
- Power (HP)
- 40
- Delivery mouth
- 3 "
- Pump body
- Cast iron
- Impeller
- Noryl
- Number of impellers
- 25
- Crankshaft
- AISI 304 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Min. flow rate (l./min.)
- 200
- Max. flow rate (l./min.)
- 1000
- Min. head (m.)
- 49
- Max. head (m.)
- 310
- Cable length (m)
- 4
- Jobs
- fire prevention systems, irrigation, pressurization systems, water supply
- Max. liquid temperature (°C)
- +35°C
- Height (cm)
- 404.2
- External diameter (cm)
- 14.8
- Weight (Kg)
- 175.2
- Warranty (years)
- 2
Bearings
| Pump bearing - fixed part | Anti-friction polymer |
| Pump bearing - rotating part | Sintered AISI 316 steel with ceramic coating |
Tree holding
Materials
| 1.3 - Delivery body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
| 4.2 - Towing joint | Stainless steel EN 1.4021 (AISI 420) |
| 5.0 - Stadium box | Stainless steel EN 1.4301 (AISI 304) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 7.0 - Lantern | Cast iron GJL 200 EN 1561 |
| 7.1 - Check Valve | Stainless steel EN 1.4301 (AISI 304) |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
| 7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
 6SR44/25 - PSR - 40 HP three-phase submersible electric pumpThis product Flow rate up to 1000 l/min (60 m³/h). Head up to 310 m. 30 Kw (40 HP) motor. |  6SR44/14 - PSR - 20 HP three-phase submersible electric pumpFlow rate up to 1000 l/min (60 m³/h). Head up to 174 m. 15 Kw (20 HP) motor. |  6SR44/16 - PSR - 25 HP three-phase submersible electric pumpFlow rate up to 1000 l/min (60 m³/h). Head up to 186 m. 18.5 Kw (25 HP) motor. |  6SR44/20 - PSR - 30 HP three-phase submersible electric pumpFlow rate up to 1000 l/min (60 m³/h). Head up to 248 m. 22 Kw (30 HP) motor. | |
|---|---|---|---|---|
| Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
| Power (Kw) | Power (Kw) 22 | Power (Kw) 15 | Power (Kw) -- | Power (Kw) 22 |
| Power (HP) | Power (HP) 40 | Power (HP) 20 | Power (HP) 25 | Power (HP) 30 |
| Delivery mouth | Delivery mouth 3 " | Delivery mouth 3 " | Delivery mouth 3 " | Delivery mouth 3 " |
| Pump body | Pump body Cast iron | Pump body Cast iron | Pump body Cast iron | Pump body Cast iron |
| Impeller | Impeller Noryl | Impeller Noryl | Impeller Noryl | Impeller Noryl |
| Number of impellers | Number of impellers 25 | Number of impellers 14 | Number of impellers 16 | Number of impellers 20 |
| Crankshaft | Crankshaft AISI 304 stainless steel | Crankshaft AISI 304 stainless steel | Crankshaft -- | Crankshaft AISI 304 stainless steel |
| Pump shaft | Pump shaft -- | Pump shaft -- | Pump shaft AISI 304 stainless steel | Pump shaft -- |
| Check valve | Check valve No | Check valve No | Check valve -- | Check valve No |
| Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection -- | Degree of protection IP 68 |
| Min. flow rate (l./min.) | Min. flow rate (l./min.) 200 | Min. flow rate (l./min.) 200 | Min. flow rate (l./min.) 200 | Min. flow rate (l./min.) 200 |
| Max. flow rate (l./min.) | Max. flow rate (l./min.) 1000 | Max. flow rate (l./min.) 1000 | Max. flow rate (l./min.) 1000 | Max. flow rate (l./min.) 1000 |
| Min. head (m.) | Min. head (m.) 49 | Min. head (m.) 27.5 | Min. head (m.) 31 | Min. head (m.) 39 |
| Max. head (m.) | Max. head (m.) 310 | Max. head (m.) 174 | Max. head (m.) 198 | Max. head (m.) 248 |
| Cable length (m) | Cable length (m) 4 | Cable length (m) 4 | Cable length (m) -- | Cable length (m) 4 |
| Jobs | Jobs fire prevention systems, irrigation, pressurization systems, water supply | Jobs fire prevention systems, irrigation, pressurization systems, water supply | Jobs fire prevention systems, irrigation, pressurization systems, water supply | Jobs fire prevention systems, irrigation, pressurization systems, water supply |
| Max. liquid temperature (°C) | Max. liquid temperature (°C) +35°C | Max. liquid temperature (°C) +35°C | Max. liquid temperature (°C) +35°C | Max. liquid temperature (°C) +35°C |
| Height (cm) | Height (cm) 404.2 | Height (cm) 258.5 | Height (cm) -- | Height (cm) 331.0 |
| External diameter (cm) | External diameter (cm) 14.8 | External diameter (cm) 14.8 | External diameter (cm) -- | External diameter (cm) 14.8 |
| Weight (Kg) | Weight (Kg) 175.2 | Weight (Kg) 115.5 | Weight (Kg) -- | Weight (Kg) 139.9 |
| Warranty (years) | Warranty (years) 2 | Warranty (years) 2 | Warranty (years) 2 | Warranty (years) 2 |
