chevron_left chevron_right
-42%
HF 6C - 1.5 HP three-phase centrifugal electric pump
Flow rate up to 1000 l/min (60 m³/h). Head up to 12 m. 1.1 Kw (1.5 HP) motor.
There are no reviews yet
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
We supply all spare parts on this product.
Description
The PEDROLLO pumps of the HF high flow rate line are recommended for civil and agricultural environments.
The PEDROLLO HF 6C has a flow rate that varies from 200 to 1000 litres per minute with a head from 12 to 4 metres.
The high achievable yields and the possibility of continuous use make the use of this electric pump advantageous for flow or rain irrigation, for drawing water from lakes, rivers, wells or for the most varied industrial uses characterised by the need to achieve considerable flow rates in a medium-low prevalence ratio.
Installation must be carried out indoors or in any case protected from the elements.
Data sheet
- Motor connection
- THREE-PHASE
- Power (Kw)
- 1.1
- Power (HP)
- 1.5
- Absorption at 230V (A)
- 6.2
- Absorption at 400V (A)
- 3.6
- Suction mouth
- 3 "
- Delivery mouth
- 3 "
- Pump body
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 44
- Min. flow rate (l./min.)
- 200
- Max. flow rate (l./min.)
- 1000
- Min. head (m.)
- 4
- Max. head (m.)
- 12
- Jobs
- water supply, irrigation, cooling systems, transfer of tanks
- Max. liquid temperature (°C)
- +90°C
- Motor voltage
- 400V
- Height (cm)
- 31.2
- Width (cm)
- 41.1
- Depth (cm)
- 24
- Weight (Kg)
- 25.4
- Warranty (years)
- 2
HF models and performances - High flow rates
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the HF 6C-6B-6A
Bearings
| Pump side motor bearing | 6304 ZZ |
| Opposite side motor bearing | 6204 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-18 |
| LP diameter | 18 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
 HF 6C - 1.5 HP three-phase centrifugal electric pumpThis product Flow rate up to 1000 l/min (60 m³/h). Head up to 12 m. 1.1 Kw (1.5 HP) motor. | |
|---|---|
| Motor connection | Motor connection THREE-PHASE |
| Power (Kw) | Power (Kw) 1.1 |
| Power (HP) | Power (HP) 1.5 |
| Absorption at 230V (A) | Absorption at 230V (A) 6.2 |
| Absorption at 400V (A) | Absorption at 400V (A) 3.6 |
| Suction mouth | Suction mouth 3 " |
| Delivery mouth | Delivery mouth 3 " |
| Pump body | Pump body Cast iron |
| Impeller | Impeller Brass |
| Number of impellers | Number of impellers 1 |
| Crankshaft | Crankshaft AISI 431 stainless steel |
| Check valve | Check valve No |
| Degree of protection | Degree of protection IP 44 |
| Min. flow rate (l./min.) | Min. flow rate (l./min.) 200 |
| Max. flow rate (l./min.) | Max. flow rate (l./min.) 1000 |
| Min. head (m.) | Min. head (m.) 4 |
| Max. head (m.) | Max. head (m.) 12 |
| Jobs | Jobs water supply, irrigation, cooling systems, transfer of tanks |
| Max. liquid temperature (°C) | Max. liquid temperature (°C) +90°C |
| Motor voltage | Motor voltage 400V |
| Height (cm) | Height (cm) 31.2 |
| Width (cm) | Width (cm) 41.1 |
| Depth (cm) | Depth (cm) 24 |
| Weight (Kg) | Weight (Kg) 25.4 |
| Warranty (years) | Warranty (years) 2 |