chevron_left chevron_right
-42%
HF 50A - 0.75 HP Three-Phase Centrifugal Electric Pump
Flow rate up to 300 l/min (18 m³/h). Head up to 12 m. 0.55 Kw (0.75 HP) motor.
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
We supply all spare parts on this product.
Description
The PEDROLLO pumps of the HF medium flow rate line are recommended for civil and agricultural environments.
The PEDROLLO HF 50A has a flow rate that varies from 50 to 300 litres per minute with a head from 12 to 6 metres.
The high achievable yields and the possibility of continuous use make the use of this electric pump advantageous for flow or rain irrigation, for drawing water from lakes, rivers, wells or for the most varied industrial uses characterised by the need to achieve considerable flow rates in a medium-low prevalence ratio.
Installation must be carried out indoors or in any case protected from the elements.
Data sheet
- Motor connection
- THREE-PHASE
- Power (Kw)
- 0.55
- Power (HP)
- 0.75
- Absorption at 230V (A)
- 3.0
- Absorption at 400V (A)
- 1.7
- Suction mouth
- 1 "1/2
- Delivery port
- 1 "1/2
- Body Pump
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Motor shaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 50
- Max flow (l./min.)
- 300
- Min head (m.)
- 6
- Max head (m.)
- 12
- Employments
- water supply, irrigation, cooling systems, transfer of tanks
- Liquid temperature max. (° C)
- 90
- Motor voltage
- 400 V
- Height (cm)
- 20
- Width (cm)
- 16.6
- Depth (cm)
- 26.5
- Weight kg)
- 8.5
- Guarantee
- 2
HF models and performances - Medium ranges
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the HF 50B-50A
Bearings
| Pump side motor bearing | 6201 ZZ |
| Opposite side motor bearing | 6201 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | AR-12 |
| LP diameter | 12 |
| Fixed ring LP | Ceramic |
| Rotating ring LP | Graphite |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | EN 1.4301 stainless steel (AISI 304) |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
 HF 50A - 0.75 HP Three-Phase Centrifugal Electric PumpThis product Flow rate up to 300 l/min (18 m³/h). Head up to 12 m. 0.55 Kw (0.75 HP) motor. |  110 square meters of lawn ready in rollsPRICE INCLUDING VAT AND TRANSPORT Composition: N. 2 pallets of 55 square meters, 220 rolls | |
|---|---|---|
| Festuca arundinacea (%) | Festuca arundinacea (%) -- | Festuca arundinacea (%) 90 |
| Poa Pratense (%) | Poa Pratense (%) -- | Poa Pratense (%) 10 |
| Motor connection | Motor connection THREE-PHASE | Motor connection -- |
| Power (Kw) | Power (Kw) 0.55 | Power (Kw) -- |
| Power (HP) | Power (HP) 0.75 | Power (HP) -- |
| Absorption at 230V (A) | Absorption at 230V (A) 3.0 | Absorption at 230V (A) -- |
| Absorption at 400V (A) | Absorption at 400V (A) 1.7 | Absorption at 400V (A) -- |
| Suction mouth | Suction mouth 1 "1/2 | Suction mouth -- |
| Delivery port | Delivery port 1 "1/2 | Delivery port -- |
| Body Pump | Body Pump Cast iron | Body Pump -- |
| Impeller | Impeller Brass | Impeller -- |
| Number of impellers | Number of impellers 1 | Number of impellers -- |
| Motor shaft | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft -- |
| Check valve | Check valve no | Check valve -- |
| Degree of protection | Degree of protection IP 44 | Degree of protection -- |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) -- |
| Max flow (l./min.) | Max flow (l./min.) 300 | Max flow (l./min.) -- |
| Min head (m.) | Min head (m.) 6 | Min head (m.) -- |
| Max head (m.) | Max head (m.) 12 | Max head (m.) -- |
| Number of clods | Number of clods -- | Number of clods 220 |
| Thickness of the clod (cm) | Thickness of the clod (cm) -- | Thickness of the clod (cm) 1.5 - 2 |
| Clod size (cm) | Clod size (cm) -- | Clod size (cm) 125x40 |
| Maintenance | Maintenance -- | Maintenance average |
| Employments | Employments water supply, irrigation, cooling systems, transfer of tanks | Employments -- |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) -- |
| Cold resistance | Cold resistance -- | Cold resistance medium high |
| Resistance to heat | Resistance to heat -- | Resistance to heat average |
| Trampling resistance | Trampling resistance -- | Trampling resistance average |
| Resistance to shade | Resistance to shade -- | Resistance to shade average |
| Resistance to drought | Resistance to drought -- | Resistance to drought average |
| Salinity resistance | Salinity resistance -- | Salinity resistance medium low |
| Species | Species -- | Species microtherm |
| Motor voltage | Motor voltage 400 V | Motor voltage -- |
| Height (cm) | Height (cm) 20 | Height (cm) -- |
| Width (cm) | Width (cm) 16.6 | Width (cm) -- |
| Depth (cm) | Depth (cm) 26.5 | Depth (cm) -- |
| Weight kg) | Weight kg) 8.5 | Weight kg) -- |
| Guarantee | Guarantee 2 | Guarantee -- |
