HF 5BM - 1.5 HP three-phase centrifugal electric pump
Flow rate up to 500 l/min (36 m³/h). Head up to 13.7 m. 1.1 Kw (1.5 HP) motor.
The PEDROLLO submersible pumps of the HF medium flow rate line are recommended for civil and agricultural environments.
The PEDROLLO HF 5BM has a flow rate ranging from 100 to 500 litres per minute with a head from 13.7 to 5 metres.
The high achievable yields and the possibility of continuous use make the use of this electric pump advantageous for flow or rain irrigation, for drawing water from lakes, rivers, wells or for the most varied industrial uses characterised by the need to achieve considerable flow rates in a medium-low prevalence ratio.
Installation must be carried out indoors or in any case protected from the elements.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 1.1
- Power (HP)
- 1.5
- Absorption at 230V (A)
- 5.7
- Absorption at 400V (A)
- 3.3
- Suction mouth
- 2"
- Delivery port
- 2"
- Body Pump
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Motor shaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 100
- Max flow (l./min.)
- 600
- Min head (m.)
- 3
- Max head (m.)
- 14.5
- Employments
- water supply, irrigation, cooling systems, transfer of tanks
- Liquid temperature max. (° C)
- 90
- Motor voltage
- 400 V
- Height (cm)
- 26
- Width (cm)
- 20.8
- Depth (cm)
- 38.6
- Weight kg)
- 19.2
- Guarantee
- 2
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6204 ZZ |
| Opposite side motor bearing | 6204 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-18 |
| LP diameter | 18 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
 HF 5BM - 1.5 HP three-phase centrifugal electric pumpThis product Flow rate up to 500 l/min (36 m³/h). Head up to 13.7 m. 1.1 Kw (1.5 HP) motor. |  TOP MULTI-EVOTECH 4 - Multi-impeller electric pump with 1 HP press controlFlow rate up to 80 l/min (4.8 m³/h). Head up to 52 m. 0.75 Kw (1 HP) motor. With integrated electronic device that allows you to start or stop the electric pump automatically by opening or closing the tap. | |
|---|---|---|
| Motor connection | Motor connection THREE-PHASE | Motor connection SINGLE PHASE |
| Power (Kw) | Power (Kw) 1.1 | Power (Kw) 0.75 |
| Power (HP) | Power (HP) 1.5 | Power (HP) 1 |
| Absorption at 230V (A) | Absorption at 230V (A) 5.7 | Absorption at 230V (A) 3.6 |
| Absorption at 400V (A) | Absorption at 400V (A) 3.3 | Absorption at 400V (A) -- |
| Suction mouth | Suction mouth 2" | Suction mouth -- |
| Delivery port | Delivery port 2" | Delivery port 1 "1/4 |
| Body Pump | Body Pump Cast iron | Body Pump Technopolymer |
| Impeller | Impeller Brass | Impeller Noryl |
| Number of impellers | Number of impellers 1 | Number of impellers 3 |
| Motor shaft | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft AISI 431 stainless steel |
| Check valve | Check valve no | Check valve Yes |
| Degree of protection | Degree of protection IP 44 | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 100 | Flow rate min. (l./min.) 10 |
| Max flow (l./min.) | Max flow (l./min.) 600 | Max flow (l./min.) 120 |
| Min head (m.) | Min head (m.) 3 | Min head (m.) 4 |
| Max head (m.) | Max head (m.) 14.5 | Max head (m.) 33 |
| Emptying level (mm) | Emptying level (mm) -- | Emptying level (mm) 35 |
| Cable length (m) | Cable length (m) -- | Cable length (m) 10 |
| Employments | Employments water supply, irrigation, cooling systems, transfer of tanks | Employments water supply, pressurization systems, irrigation |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) 40 |
| Motor voltage | Motor voltage 400 V | Motor voltage -- |
| Height (cm) | Height (cm) 26 | Height (cm) 44.2 |
| Width (cm) | Width (cm) 20.8 | Width (cm) 23.9 |
| Depth (cm) | Depth (cm) 38.6 | Depth (cm) -- |
| Weight kg) | Weight kg) 19.2 | Weight kg) 9.9 |
| Guarantee | Guarantee 2 | Guarantee 2 |