HFm 5A - 1.5 HP Single Phase Centrifugal Electric Pump
Flow rate up to 600 l/min (36 m³/h). Head up to 16 m. 0.90 Kw (1.25 HP) motor.
The PEDROLLO pumps of the HF medium flow line are recommended for civil and agricultural environments.
The PEDROLLO HF 5A has a flow rate ranging from 100 to 600 litres per minute with a head from 16 to 4.3 metres.
The high achievable yields and the possibility of continuous use make the use of this electric pump advantageous for flow or rain irrigation, for drawing water from lakes, rivers, wells or for the most varied industrial uses characterised by the need to achieve considerable flow rates in a medium-low prevalence ratio.
Installation must be carried out indoors or in any case protected from the elements.
- Motor connection
- SINGLE PHASE
- Power (Kw)
- 1.1
- Power (HP)
- 1.5
- Absorption at 230V (A)
- 6.2
- Capacitor
- 25 µF450 VL
- Suction mouth
- 2"
- Delivery port
- 2"
- Body Pump
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Motor shaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 100
- Max flow (l./min.)
- 600
- Min head (m.)
- 3
- Max head (m.)
- 14.5
- Employments
- water supply, irrigation, cooling systems, transfer of tanks
- Liquid temperature max. (° C)
- 90
- Motor voltage
- 230 V
- Height (cm)
- 23.8
- Width (cm)
- 6.31
- Depth (cm)
- 19.2
- Weight kg)
- 14.6
- Guarantee
- 2
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6203 ZZ |
| Opposite side motor bearing | 6203 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | AR-14 |
| LP diameter | 14 |
| Fixed ring LP | Ceramic |
| Rotating ring LP | Graphite |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | EN 1.4301 stainless steel (AISI 304) |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
 HFm 5A - 1.5 HP Single Phase Centrifugal Electric PumpThis product Flow rate up to 600 l/min (36 m³/h). Head up to 16 m. 0.90 Kw (1.25 HP) motor. |  TOP MULTI-TECH 5 - 1 HP multi-impeller electric pump with press controlFlow rate up to 120 l/min (7.2 m³/h). Head up to 41 m. 0.75 Kw (1 HP) motor. With integrated electronic device that allows you to start or stop the electric pump automatically by opening or closing the tap. |  TOP MULTI-EVOTECH 5 - 1 HP multi-impeller electric pump with press controlFlow rate up to 120 l/min (4.8 m³/h). Head up to 41 m. 0.75 Kw (1 HP) motor. With integrated electronic device that allows you to start or stop the electric pump automatically by opening or closing the tap. | |
|---|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Power (Kw) | Power (Kw) 1.1 | Power (Kw) 0.75 | Power (Kw) 0.75 |
| Power (HP) | Power (HP) 1.5 | Power (HP) 1 | Power (HP) 1 |
| Absorption at 230V (A) | Absorption at 230V (A) 6.2 | Absorption at 230V (A) 3.4 | Absorption at 230V (A) 3.6 |
| Capacitor | Capacitor 25 µF450 VL | Capacitor -- | Capacitor -- |
| Suction mouth | Suction mouth 2" | Suction mouth -- | Suction mouth -- |
| Delivery port | Delivery port 2" | Delivery port 1 "1/4 | Delivery port 1 "1/4 |
| Body Pump | Body Pump Cast iron | Body Pump Technopolymer | Body Pump Technopolymer |
| Impeller | Impeller Brass | Impeller Noryl | Impeller Noryl |
| Number of impellers | Number of impellers 1 | Number of impellers 5 | Number of impellers 5 |
| Motor shaft | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel |
| Check valve | Check valve no | Check valve Yes | Check valve Yes |
| Degree of protection | Degree of protection IP 44 | Degree of protection IP 68 | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 100 | Flow rate min. (l./min.) 10 | Flow rate min. (l./min.) 10 |
| Max flow (l./min.) | Max flow (l./min.) 600 | Max flow (l./min.) 80 | Max flow (l./min.) 120 |
| Min head (m.) | Min head (m.) 3 | Min head (m.) 5 | Min head (m.) 4 |
| Max head (m.) | Max head (m.) 14.5 | Max head (m.) 42 | Max head (m.) 33 |
| Emptying level (mm) | Emptying level (mm) -- | Emptying level (mm) 35 | Emptying level (mm) 35 |
| Cable length (m) | Cable length (m) -- | Cable length (m) 10 | Cable length (m) 10 |
| Employments | Employments water supply, irrigation, cooling systems, transfer of tanks | Employments water supply, pressurization systems, irrigation | Employments water supply, pressurization systems, irrigation |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 |
| Motor voltage | Motor voltage 230 V | Motor voltage -- | Motor voltage -- |
| Height (cm) | Height (cm) 23.8 | Height (cm) 44.2 | Height (cm) 44.2 |
| Width (cm) | Width (cm) 6.31 | Width (cm) 23.9 | Width (cm) 23.9 |
| Depth (cm) | Depth (cm) 19.2 | Depth (cm) -- | Depth (cm) -- |
| Weight kg) | Weight kg) 14.6 | Weight kg) 9.9 | Weight kg) 9.9 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 |