HFm 5BM - 1.5 HP Single Phase Centrifugal Electric Pump
Flow rate up to 600 l/min (36 m³/h). Head up to 19 m. 1.1 Kw (1.5 HP) motor.




The PEDROLLO pumps of the HF medium flow rate line are recommended for civil and agricultural environments.
The PEDROLLO HF 5BM has a flow rate that varies from 100 to 600 litres per minute with a head from 19 to 6 metres.
The high achievable yields and the possibility of continuous use make the use of this electric pump advantageous for flow or rain irrigation, for drawing water from lakes, rivers, wells or for the most varied industrial uses characterised by the need to achieve considerable flow rates in a medium-low prevalence ratio.
Installation must be carried out indoors or in any case protected from the elements.
- Motor connection
- SINGLE PHASE
- Power (Kw)
- 1.1
- Power (HP)
- 1.5
- Absorption at 230V (A)
- 7.7
- Capacitor
- 25 µF450 VL
- Suction mouth
- 2"
- Delivery mouth
- 2"
- Pump body
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 44
- Min. flow rate (l./min.)
- 100
- Max. flow rate (l./min.)
- 600
- Min. head (m.)
- 6
- Max. head (m.)
- 19
- Jobs
- water supply, irrigation, cooling systems, transfer of tanks
- Max. liquid temperature (°C)
- 90
- Motor voltage
- 230 V
- Height (cm)
- 26
- Width (cm)
- 38.6
- Depth (cm)
- 20.8
- Weight (Kg)
- 19.2
- Warranty (years)
- 2
|
|
|
|
|

Bearings
Pump side motor bearing | 6204 ZZ |
Opposite side motor bearing | 6204 ZZ |
Shaft seal
Type of seal | Single Mechanical Seal |
Pump side model | FN-18 |
LP diameter | 18 |
Fixed ring LP | Graphite |
Rotating ring LP | Ceramic |
LP elastomer | NBR |
Mat
1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
3.0 - Impeller | Brass CW617N EN 12165 |
4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
6.0 - Motor holder | Aluminum EN-AB 46100 |
6.1 - Engine cover | Aluminum EN-AB 46100 |
7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
![]() HFm 5BM - 1.5 HP Single Phase Centrifugal Electric PumpThis product Flow rate up to 600 l/min (36 m³/h). Head up to 19 m. 1.1 Kw (1.5 HP) motor. | ![]() HFm 5A - 1.5 HP Single Phase Centrifugal Electric PumpFlow rate up to 600 l/min (36 m³/h). Head up to 16 m. 0.90 Kw (1.25 HP) motor. | ![]() HFm 5AM - 2 HP Single Phase Centrifugal Electric PumpFlow rate up to 600 l/min (36 m³/h). Head up to 22 m. 1.5 Kw (2 HP) motor. | ![]() HFm 5ARM - 3 HP single-phase centrifugal electric pumpFlow rate up to 700 l/min (42 m³/h). Head up to 23.5 m. 2.2 Kw (3 HP) motor. | |
---|---|---|---|---|
Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
Power (Kw) | Power (Kw) 1.1 | Power (Kw) 1.1 | Power (Kw) 1.5 | Power (Kw) 2.2 |
Power (HP) | Power (HP) 1.5 | Power (HP) 1.5 | Power (HP) 2 | Power (HP) 3 |
Absorption at 230V (A) | Absorption at 230V (A) 7.7 | Absorption at 230V (A) 6.2 | Absorption at 230V (A) 10.1 | Absorption at 230V (A) 11.5 |
Capacitor | Capacitor 25 µF450 VL | Capacitor 25 µF450 VL | Capacitor 45 µF450 VL | Capacitor -- |
Suction mouth | Suction mouth 2" | Suction mouth 2" | Suction mouth 2" | Suction mouth 2" |
Delivery mouth | Delivery mouth 2" | Delivery mouth 2" | Delivery mouth 2" | Delivery mouth 2" |
Pump body | Pump body Cast iron | Pump body Cast iron | Pump body Cast iron | Pump body Cast iron |
Impeller | Impeller Brass | Impeller Brass | Impeller Brass | Impeller Brass |
Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
Crankshaft | Crankshaft AISI 431 stainless steel | Crankshaft Stainless steel EN 10088-3 1.4104 | Crankshaft AISI 431 stainless steel | Crankshaft AISI 431 stainless steel |
Check valve | Check valve No | Check valve No | Check valve No | Check valve No |
Degree of protection | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 |
Min. flow rate (l./min.) | Min. flow rate (l./min.) 100 | Min. flow rate (l./min.) 100 | Min. flow rate (l./min.) 50 | Min. flow rate (l./min.) 100 |
Max. flow rate (l./min.) | Max. flow rate (l./min.) 600 | Max. flow rate (l./min.) 600 | Max. flow rate (l./min.) 600 | Max. flow rate (l./min.) 700 |
Min. head (m.) | Min. head (m.) 6 | Min. head (m.) 4.3 | Min. head (m.) 10 | Min. head (m.) 10 |
Max. head (m.) | Max. head (m.) 19 | Max. head (m.) 16 | Max. head (m.) 22 | Max. head (m.) 23 |
Jobs | Jobs water supply, irrigation, cooling systems, transfer of tanks | Jobs water supply, irrigation, cooling systems, transfer of tanks | Jobs water supply, irrigation, cooling systems, transfer of tanks | Jobs water supply, irrigation, cooling systems, transfer of tanks |
Max. liquid temperature (°C) | Max. liquid temperature (°C) 90 | Max. liquid temperature (°C) 90 | Max. liquid temperature (°C) 90 | Max. liquid temperature (°C) 90 |
Motor voltage | Motor voltage 230 V | Motor voltage 230 V | Motor voltage 230 V | Motor voltage 230 V |
Height (cm) | Height (cm) 26 | Height (cm) 23.8 | Height (cm) 26 | Height (cm) 26.0 |
Width (cm) | Width (cm) 38.6 | Width (cm) 31.6 | Width (cm) 38.6 | Width (cm) 20.8 |
Depth (cm) | Depth (cm) 20.8 | Depth (cm) 19.2 | Depth (cm) 20.8 | Depth (cm) 40.6 |
Weight (Kg) | Weight (Kg) 19.2 | Weight (Kg) 14.6 | Weight (Kg) 21.6 | Weight (Kg) 24.6 |
Warranty (years) | Warranty (years) 2 | Warranty (years) 2 | Warranty (years) 2 | Warranty (years) 2 |