JSW 3AL - 3 HP three-phase self-priming electric pump
Flow rate up to 160 l/min (9.6 m³/h). Head up to 64 m. 2.2 Kw (3 HP) motor.
Delivery Options
| Carrier | Description | Estimated Delivery | |
|---|---|---|---|
 | Mail Boxes - 2 giorni | This courier delivers within 48 hours from the moment we entrust the products to him. | Thursday 22 October - Friday 23 October |
 | Poste Italiane - 2 giorni Italia | This courier delivers within 24/48 hours from the moment we entrust them with the products. | Thursday 22 October - Friday 23 October |
 | One Express - 2 giorni Italia | This courier delivers within 24/72 hours from the moment we entrust them with the products. | Friday 23 October - Monday 26 October |
 | Poste Italiane - 3 giorni punto di ritiro | This courier delivers within 24/72 hours from the moment we entrust them with the products. | Thursday 22 October |
Carrier: Mail Boxes - 2 giorni
Description: This courier delivers within 48 hours from the moment we entrust the products to him.
Estimated delivery:
Thursday 22 October - Friday 23 October
Carrier: Poste Italiane - 2 giorni Italia
Description: This courier delivers within 24/48 hours from the moment we entrust them with the products.
Estimated delivery:
Thursday 22 October - Friday 23 October
Carrier: One Express - 2 giorni Italia
Description: This courier delivers within 24/72 hours from the moment we entrust them with the products.
Estimated delivery:
Friday 23 October - Monday 26 October
Carrier: Poste Italiane - 3 giorni punto di ritiro
Description: This courier delivers within 24/72 hours from the moment we entrust them with the products.
Estimated delivery:
Thursday 22 October
The Pedrollo JSW 3AL self-priming electric pump is recommended for pumping clean water in domestic applications.
Designed to suck water even in the presence of air mixed with the pumped liquid.
Due to its reliability, the JSW 3AL is especially recommended for water distribution in conjunction with small or medium-sized pressure tanks, for irrigation of vegetable gardens and gardens, etc.
The flow rate ranges from 30 to 160 liters per minute. The head ranges from 36 to 64 meters.
The suction capacity of the JSW 3AL is up to 9 metres.
It must be powered by a single-phase voltage, has a horsepower of 3 HP and the temperature of the liquid to be pumped ranges from -15 degrees centigrade up to +40.
The JSW 3AL has a cast iron pump body, and a stainless steel impeller and motor body. These materials give the pump excellent strength and durability, allowing it to last a long time.
Installation must be carried out in well-ventilated, closed areas or in any case protected from the elements.
- Jobs
- water supply, fire prevention systems, washing systems, pressurization systems, irrigation, tank transfer
- Motor connection
- THREE-PHASE
- Power (Kw)
- 2.2
- Power (HP)
- 3
- Absorption at 230V (A)
- 9.3
- Current consumption at 400V (A)
- 5.4
- Pump body
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Crankshaft
- AISI 304 stainless steel
- Check valve
- No
- Minimum flow rate (l./min.)
- 36
- Max. flow rate (l./min.)
- 64
- Min. head (m.)
- 30
- Max. head (m.)
- 160
- Max. liquid temperature (°C)
- +40°C
- Motor voltage
- 230 V, 400 V
- Degree of protection
- IP 44
- Suction mouth
- 1" 1/4
- Delivery mouth
- 1"
- Height (cm)
- 24
- Width (cm)
- 20.6
- Depth (cm)
- 54.2
- Weight (Kg)
- 28.4
- Warranty (years)
- 2
Use and formulation of products
- Jobs
- water supply, pressurization systems, irrigation, washing systems, tank transfer, fire prevention systems
Engine and mechanical performance
- Motor connection
- THREE-PHASE
- Power (Kw)
- 2.2
- Power (HP)
- 3
- Absorption at 230V (A)
- 9.3
- Current consumption at 400V (A)
- 5.4
Pump components and construction
- Pump body
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Crankshaft
- AISI 304 stainless steel
- Check valve
- No
Hydraulic performance and filtration
- Minimum flow rate (l./min.)
- 36
- Max. flow rate (l./min.)
- 64
- Min. head (m.)
- 30
- Max. head (m.)
- 160
Liquids and pumping conditions
- Max. liquid temperature (°C)
- +40°C
Power supply and electrical parameters
- Motor voltage
- 230 V, 400 V
Safety and protection
- Degree of protection
- IP 44
Installation and connections
- Suction mouth
- 1" 1/4
- Delivery mouth
- 1"
Dimensions and weight
- Height (cm)
- 24
- Width (cm)
- 20.6
- Depth (cm)
- 54.2
- Weight (Kg)
- 28.4
Packaging, maintenance, and warranty
- Warranty (years)
- 2
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6204 ZZ |
| Opposite side engine bearing | 6204 ZZ |
Tree holding
| Type of seal | Single Mechanical Seal |
| Shrinkage DN1=450 DN2=350 | FN-18 |
| LP diameter | 18 |
| LP fixed ring | Graphite |
| LP rotating ring | Ceramic |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 3.1 - Ejector group | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | EN-AB 46100 aluminium |
| 7.0 - Lantern | EN-AB 46100 aluminium |
Reviews (2) - Review moderation
Il cliente non ha lasciato alcun commento.
Der Kunde hat keine Kommentare hinterlassen.
Compare with Similar Products
 JSW 3AL - 3 HP three-phase self-priming electric pumpThis product Flow rate up to 160 l/min (9.6 m³/h). Head up to 64 m. 2.2 Kw (3 HP) motor. |  PLURIJET 6/130 - 3 HP three-phase self-priming multi-impeller electric pump Flow rate up to 130 l/min (7.8 m³/h). Head up to 97 m. 2.2 Kw (3 HP) motor. | |
|---|---|---|
| Price | Price €681.98 -42% €395.55 | Price €1,194.38 -42% €692.74 |
| Jobs | Jobs water supply, fire prevention systems, washing systems, pressurization systems, irrigation, tank transfer | Jobs water supply, pressurization systems, irrigation |
| Motor connection | Motor connection THREE-PHASE | Motor connection THREE-PHASE |
| Power (Kw) | Power (Kw) 2.2 | Power (Kw) 1.1 |
| Power (HP) | Power (HP) 3 | Power (HP) 3 |
| Absorption at 230V (A) | Absorption at 230V (A) 9.3 | Absorption at 230V (A) 10.4 |
| Current consumption at 400V (A) | Current consumption at 400V (A) 5.4 | Current consumption at 400V (A) 6 |
| Pump body | Pump body Cast iron | Pump body AISI 304 stainless steel |
| Impeller | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel |
| Number of impellers | Number of impellers 1 | Number of impellers 6 |
| Crankshaft | Crankshaft AISI 304 stainless steel | Crankshaft Stainless steel EN 10088-3 1.4104 |
| Check valve | Check valve No | Check valve No |
| Minimum flow rate (l./min.) | Minimum flow rate (l./min.) 36 | Minimum flow rate (l./min.) 5 |
| Max. flow rate (l./min.) | Max. flow rate (l./min.) 64 | Max. flow rate (l./min.) 130 |
| Min. head (m.) | Min. head (m.) 30 | Min. head (m.) 46 |
| Max. head (m.) | Max. head (m.) 160 | Max. head (m.) 97 |
| Max. liquid temperature (°C) | Max. liquid temperature (°C) +40°C | Max. liquid temperature (°C) +40°C |
| Motor voltage | Motor voltage 230 V, 400 V | Motor voltage -- |
| Degree of protection | Degree of protection IP 44 | Degree of protection IP 44 |
| Suction mouth | Suction mouth 1" 1/4 | Suction mouth 1" 1/4 |
| Delivery mouth | Delivery mouth 1" | Delivery mouth 1" |
| Height (cm) | Height (cm) 24 | Height (cm) 22.8 |
| Width (cm) | Width (cm) 20.6 | Width (cm) 57.5 |
| Depth (cm) | Depth (cm) 54.2 | Depth (cm) 18.5 |
| Weight (Kg) | Weight (Kg) 28.4 | Weight (Kg) 22.7 |
| Warranty (years) | Warranty (years) 2 | Warranty (years) 2 |