chevron_left chevron_right
-42%
4CP 100 - Three-phase multi-impeller electric pump
Flow rate up to 130 l / min (7.8 m³ / h). Head up to 46 m. 0.75 Kw (1 HP) motor.
Telephone support for information before purchasing.
After-sales assistance for product installation.
We supply all spare parts on this product.
Description
They are recommended for pumping clean water and liquids that are not chemically aggressive to the materials from which the pump is made.
Due to their reliability and silence they are widely used in the domestic sector and in particular for the distribution of water in conjunction with small or medium-sized autoclave tanks, for irrigation of vegetable gardens or gardens, etc.
The installation must be carried out in closed places or in any case protected from bad weather.
Data sheet
- Motor connection
- THREE-PHASE
- Power (HP)
- 1
- Absorption at 230V (A)
- 4.5
- Absorption at 400V (A)
- 2.6
- Suction mouth
- 1 "
- Delivery mouth
- 1 "
- Pump body
- Cast iron
- Impeller
- Noryl
- Number of impellers
- 4
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Degree of protection
- IP 44
- Min. flow rate (l./min.)
- 5
- Max. flow rate (l./min.)
- 130
- Min. head (m.)
- 5
- Max. head (m.)
- 50
- Jobs
- water supply, pressurization systems, irrigation
- Max. liquid temperature (°C)
- 40
- Height (cm)
- 19.1
- Width (cm)
- 15.8
- Depth (cm)
- 35.6
- Weight (Kg)
- 13.4
- Warranty (years)
- 2
Models and performance 2-5CP
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the 4CP 100
Bearings
| Pump side motor bearing | 6203 ZZ |
| Opposite side motor bearing | 6203 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | AR-13 |
| LP diameter | 13 |
| Fixed ring LP | Ceramic |
| Rotating ring LP | Graphite |
| LP elastomer | NBR |
Materials
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | EN 1.4301 stainless steel (AISI 304) |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 5.2 - Shim Ring | POM acetal resin |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
 4CP 100 - Three-phase multi-impeller electric pumpThis product Flow rate up to 130 l / min (7.8 m³ / h). Head up to 46 m. 0.75 Kw (1 HP) motor. | |
|---|---|
| Motor connection | Motor connection THREE-PHASE |
| Power (HP) | Power (HP) 1 |
| Absorption at 230V (A) | Absorption at 230V (A) 4.5 |
| Absorption at 400V (A) | Absorption at 400V (A) 2.6 |
| Suction mouth | Suction mouth 1 " |
| Delivery mouth | Delivery mouth 1 " |
| Pump body | Pump body Cast iron |
| Impeller | Impeller Noryl |
| Number of impellers | Number of impellers 4 |
| Crankshaft | Crankshaft Stainless steel EN 10088-3 1.4104 |
| Check valve | Check valve No |
| Degree of protection | Degree of protection IP 44 |
| Min. flow rate (l./min.) | Min. flow rate (l./min.) 5 |
| Max. flow rate (l./min.) | Max. flow rate (l./min.) 130 |
| Min. head (m.) | Min. head (m.) 5 |
| Max. head (m.) | Max. head (m.) 50 |
| Jobs | Jobs water supply, pressurization systems, irrigation |
| Max. liquid temperature (°C) | Max. liquid temperature (°C) 40 |
| Height (cm) | Height (cm) 19.1 |
| Width (cm) | Width (cm) 15.8 |
| Depth (cm) | Depth (cm) 35.6 |
| Weight (Kg) | Weight (Kg) 13.4 |
| Warranty (years) | Warranty (years) 2 |