chevron_left chevron_right
-42%
2CP 25/14A - 2 HP three-phase twin-impeller centrifugal pump
Flow rate up to 100 l/min (6 m³/h). Head up to 67 m. 1.5 Kw (2 HP) motor.
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
We supply all spare parts on this product.
Description
The PEDROLLO pumps of the 2CP line are recommended for pumping clean water and liquids that are chemically non-aggressive for the materials from which the pump is made.
The PEDROLLO 2CP 25/14A has a flow rate that varies from 20 to 100 litres per minute with a head from 67 to 32 metres.
The high efficiency and adaptability to the most varied applications, even anomalous ones, make it an ideal choice in the domestic, civil and industrial sectors; in particular for the distribution of water in combination with pressure tanks, for increasing the pressure in the network, for fire-fighting groups.
Installation must be carried out indoors or in any case protected from the elements.
Data sheet
- Motor connection
- THREE-PHASE
- Power (Kw)
- 1.1
- Power (HP)
- 2
- Absorption at 230V (A)
- 6.9
- Absorption at 400V (A)
- 4.0
- Suction mouth
- 1 "1/4
- Delivery port
- 1 "
- Body Pump
- Cast iron
- Impeller
- Brass
- Number of impellers
- 2
- Motor shaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- 20
- Max flow (l./min.)
- 100
- Min head (m.)
- 32
- Max head (m.)
- 67
- Employments
- water supply, pressurization systems, fire prevention systems
- Liquid temperature max. (° C)
- 90
- Height (cm)
- 26.1
- Width (cm)
- 22.5
- Depth (cm)
- 40.4
- Weight kg)
- 23.5
- Guarantee
- 2
Models and performances 2CP 25/130-25/14
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the 2CP 25
Bearings
| Pump side motor bearing | 6204 ZZ-C3 |
| Opposite side motor bearing | 6204 ZZ-C3 |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-18 |
| LP diameter | 18 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | NBR |
Materials
| 1.1 - Aspiring Body | Cast iron GJL 200 EN 1561 |
| 1.2 - Pressing Body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46102 |
Compare with Similar Products
 2CP 25/14A - 2 HP three-phase twin-impeller centrifugal pumpThis product Flow rate up to 100 l/min (6 m³/h). Head up to 67 m. 1.5 Kw (2 HP) motor. |  PWM II 400 D / 13.3 - 13.3 A three-phase inverterInverter for three-phase pumps up to 7.5 HP | |
|---|---|---|
| Motor connection | Motor connection THREE-PHASE | Motor connection -- |
| Power (Kw) | Power (Kw) 1.1 | Power (Kw) -- |
| Power (HP) | Power (HP) 2 | Power (HP) -- |
| Absorption at 230V (A) | Absorption at 230V (A) 6.9 | Absorption at 230V (A) -- |
| Absorption at 400V (A) | Absorption at 400V (A) 4.0 | Absorption at 400V (A) -- |
| Suction mouth | Suction mouth 1 "1/4 | Suction mouth 1 "1/2 |
| Delivery port | Delivery port 1 " | Delivery port 1 "1/2 |
| Body Pump | Body Pump Cast iron | Body Pump -- |
| Impeller | Impeller Brass | Impeller -- |
| Number of impellers | Number of impellers 2 | Number of impellers -- |
| Motor shaft | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft -- |
| Check valve | Check valve no | Check valve -- |
| Degree of protection | Degree of protection IP 44 | Degree of protection IP 55 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) -- |
| Max flow (l./min.) | Max flow (l./min.) 100 | Max flow (l./min.) 400 |
| Min head (m.) | Min head (m.) 32 | Min head (m.) -- |
| Max head (m.) | Max head (m.) 67 | Max head (m.) -- |
| Employments | Employments water supply, pressurization systems, fire prevention systems | Employments -- |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) -- |
| Line power supply | Line power supply -- | Line power supply three-phase |
| Supply voltage (Volt) | Supply voltage (Volt) -- | Supply voltage (Volt) 400 |
| Line current | Line current -- | Line current 16 |
| Line phases | Line phases -- | Line phases 3 x 400 V |
| Motor power supply | Motor power supply -- | Motor power supply three-phase |
| Motor voltage | Motor voltage -- | Motor voltage 400 V |
| Engine phases | Engine phases -- | Engine phases 3 x 400 V |
| Amperometric protection | Amperometric protection -- | Amperometric protection Yes |
| Short circuit protection | Short circuit protection -- | Short circuit protection Yes |
| Dry running protection | Dry running protection -- | Dry running protection Yes |
| Height (cm) | Height (cm) 26.1 | Height (cm) 28.2 |
| Width (cm) | Width (cm) 22.5 | Width (cm) 23.7 |
| Depth (cm) | Depth (cm) 40.4 | Depth (cm) 18.4 |
| Weight kg) | Weight kg) 23.5 | Weight kg) -- |
| Guarantee | Guarantee 2 | Guarantee 2 |
