FCR 130/3 - 1.5 HP three-phase multi-impeller electric pump
With stainless steel impellers. Flow rate up to 130 l/min (7.8 m³/h). Head up to 49 m. Motor 1.1 Kw (1.5 HP).
The Pedrollo FCR 130/3 multi-impeller electric pump is recommended for pumping clean water and liquids that are chemically non-aggressive for the materials from which the pump is made.
Due to its reliability and silence, it is widely used in the domestic sector and in particular for the distribution of water in combination with small or medium-sized pressure tanks, for the irrigation of vegetable gardens or gardens, etc.
Installation must be carried out indoors or in any case protected from the elements.
- Motor connection
- THREE-PHASE
- Power (HP)
- 1.5
- Absorption at 230V (A)
- 5.6
- Absorption at 400V (A)
- 3.2
- Suction mouth
- 1 "1/4
- Delivery mouth
- 1 "
- Pump body
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 3
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 44
- Min. flow rate (l./min.)
- 5
- Max. flow rate (l./min.)
- 130
- Min. head (m.)
- 24
- Max. head (m.)
- 49
- Jobs
- irrigation
- Max. liquid temperature (°C)
- 90
- Height (cm)
- 22.8
- Width (cm)
- 44.5
- Depth (cm)
- 18.5
- Weight (Kg)
- 18.1
- Warranty (years)
- 2
Bearings
| Pump side motor bearing | 6304 2RS-C3 |
| Opposite side motor bearing | 6204 ZZ-C3E |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-18 |
| LP diameter | 18 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump Body | EN 1.4301 stainless steel (AISI 304) |
| 2.1 - Seal holder cover | EN 1.4301 stainless steel (AISI 304) |
| 3.0 - Impeller | EN 1.4301 stainless steel (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | EN 1.4301 stainless steel (AISI 304) |
| 5.2 - Shim Ring | PTFE |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
 FCR 130/3 - 1.5 HP three-phase multi-impeller electric pumpThis product With stainless steel impellers. Flow rate up to 130 l/min (7.8 m³/h). Head up to 49 m. Motor 1.1 Kw (1.5 HP). |  CASSETTA SAVE R camel - 49 cm cassette vase camel OUTLETCamel colour. | |
|---|---|---|
| Motor connection | Motor connection THREE-PHASE | Motor connection -- |
| Power (HP) | Power (HP) 1.5 | Power (HP) -- |
| Absorption at 230V (A) | Absorption at 230V (A) 5.6 | Absorption at 230V (A) -- |
| Absorption at 400V (A) | Absorption at 400V (A) 3.2 | Absorption at 400V (A) -- |
| Suction mouth | Suction mouth 1 "1/4 | Suction mouth -- |
| Delivery mouth | Delivery mouth 1 " | Delivery mouth -- |
| Pump body | Pump body AISI 304 stainless steel | Pump body -- |
| Impeller | Impeller AISI 304 stainless steel | Impeller -- |
| Number of impellers | Number of impellers 3 | Number of impellers -- |
| Crankshaft | Crankshaft AISI 431 stainless steel | Crankshaft -- |
| Check valve | Check valve No | Check valve -- |
| Degree of protection | Degree of protection IP 44 | Degree of protection -- |
| Min. flow rate (l./min.) | Min. flow rate (l./min.) 5 | Min. flow rate (l./min.) -- |
| Max. flow rate (l./min.) | Max. flow rate (l./min.) 130 | Max. flow rate (l./min.) -- |
| Min. head (m.) | Min. head (m.) 24 | Min. head (m.) -- |
| Max. head (m.) | Max. head (m.) 49 | Max. head (m.) -- |
| Jobs | Jobs irrigation | Jobs -- |
| Max. liquid temperature (°C) | Max. liquid temperature (°C) 90 | Max. liquid temperature (°C) -- |
| Height (cm) | Height (cm) 22.8 | Height (cm) 17 |
| Width (cm) | Width (cm) 44.5 | Width (cm) 17 |
| Length (cm) | Length (cm) -- | Length (cm) 49 |
| Depth (cm) | Depth (cm) 18.5 | Depth (cm) -- |
| Weight (Kg) | Weight (Kg) 18.1 | Weight (Kg) 0.46 |
| Warranty (years) | Warranty (years) 2 | Warranty (years) -- |
