FCR 240/4 - 2.5 HP three-phase multi-impeller electric pump
Flow rate up to 240 l/min (14.4 m³/h). Head up to 62 m. 2 Kw (2.5 HP) motor.
The FCR 240/4 multi-impeller electric pump is recommended for irrigation of domestic environments.
This pump is recommended for pumping clean water and liquids that are not chemically aggressive towards the materials from which the pump is made.
The pump has a very simple operation, the impellers are activated and thanks to their movement they pump the water into the pump body.
The FCR 240/4 is equipped with multiple large impellers. Thanks to this feature, the pump is ideal for domestic environments such as vegetable gardens or gardens due to its silence.
The flow rate ranges from 20 to 240 liters per minute. The head ranges from 15.5 to 62.5 meters.
This pump has a 1¼" suction port and a 1" discharge port.
The FCR 240/4 must be powered by a three-phase voltage, has a horsepower of 2.5 HP and the temperature of the liquid to be pumped ranges from -10 degrees centigrade up to +90.
The pump body, the impeller and the motor shaft are made of AISI 304 stainless steel and this gives the pump good strength and resistance.
The FCR 240/4 must be installed indoors or in any case protected from the elements.
- Motor connection
- THREE-PHASE
- Power (HP)
- 2.5
- Absorption at 230V (A)
- 7.6
- Absorption at 400V (A)
- 4.4
- Suction mouth
- 1 "1/4
- Delivery mouth
- 1 "
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 2
- Crankshaft
- AISI 304 stainless steel
- Check valve
- No
- Degree of protection
- IP 44
- Min. flow rate (l./min.)
- 20
- Max. flow rate (l./min.)
- 240
- Min. head (m.)
- 15.5
- Max. head (m.)
- 62.5
- Jobs
- irrigation
- Max. liquid temperature (°C)
- +90°C, +40°C
- Motor voltage
- 230 V
- Height (cm)
- 18.5
- Width (cm)
- 20.5
- Depth (cm)
- 48.6
- Weight (Kg)
- 22.7
- Warranty (years)
- 2
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6304 2RS-C3 |
| Opposite side motor bearing | 6204 ZZ-C3E |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-18 |
| LP diameter | 18 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump Body | EN 1.4301 stainless steel (AISI 304) |
| 2.1 - Seal holder cover | EN 1.4301 stainless steel (AISI 304) |
| 3.0 - Impeller | EN 1.4301 stainless steel (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | EN 1.4301 stainless steel (AISI 304) |
| 5.2 - Shim Ring | PTFE |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
 FCR 240/4 - 2.5 HP three-phase multi-impeller electric pumpThis product Flow rate up to 240 l/min (14.4 m³/h). Head up to 62 m. 2 Kw (2.5 HP) motor. |  4BLOCKm 2/13 (20m) - 1 HP single-phase submersible electric pumpFlow rate up to 60 l/min (3.6 m³/h). Head up to 101 m. 0.75 Kw (1 HP) motor. 20 meters of cable. |  4BLOCKm 4/7 (30m) - 0.75 HP single-phase submersible electric pumpFlow rate up to 100 l/min (6 m³/h). Head up to 55 m. 0.55 Kw (0.75 HP) motor. 30 meters of cable. | |
|---|---|---|---|
| Motor connection | Motor connection THREE-PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Power (Kw) | Power (Kw) -- | Power (Kw) 0.75 | Power (Kw) 0.55 |
| Power (HP) | Power (HP) 2.5 | Power (HP) 1 | Power (HP) 0.75 |
| Absorption at 230V (A) | Absorption at 230V (A) 7.6 | Absorption at 230V (A) 6 | Absorption at 230V (A) 4 |
| Capacitor | Capacitor -- | Capacitor 35 µF450 VL | Capacitor 20 µF450 VL |
| Absorption at 400V (A) | Absorption at 400V (A) 4.4 | Absorption at 400V (A) -- | Absorption at 400V (A) -- |
| Suction mouth | Suction mouth 1 "1/4 | Suction mouth -- | Suction mouth -- |
| Delivery mouth | Delivery mouth 1 " | Delivery mouth 1 "1/4 | Delivery mouth 1 "1/4 |
| Pump body | Pump body -- | Pump body AISI 304 stainless steel | Pump body AISI 304 stainless steel |
| Impeller | Impeller AISI 304 stainless steel | Impeller Delrin | Impeller Delrin |
| Number of impellers | Number of impellers 2 | Number of impellers 12 | Number of impellers 6 |
| Crankshaft | Crankshaft AISI 304 stainless steel | Crankshaft -- | Crankshaft -- |
| Pump shaft | Pump shaft -- | Pump shaft AISI 304 stainless steel | Pump shaft AISI 304 stainless steel |
| Check valve | Check valve No | Check valve No | Check valve No |
| Degree of protection | Degree of protection IP 44 | Degree of protection IP 68 | Degree of protection IP 68 |
| Min. flow rate (l./min.) | Min. flow rate (l./min.) 20 | Min. flow rate (l./min.) 10 | Min. flow rate (l./min.) 20 |
| Max. flow rate (l./min.) | Max. flow rate (l./min.) 240 | Max. flow rate (l./min.) 60 | Max. flow rate (l./min.) 100 |
| Min. head (m.) | Min. head (m.) 15.5 | Min. head (m.) 38.5 | Min. head (m.) 17.5 |
| Max. head (m.) | Max. head (m.) 62.5 | Max. head (m.) 101 | Max. head (m.) 55 |
| Cable length (m) | Cable length (m) -- | Cable length (m) 20 | Cable length (m) 30 |
| Jobs | Jobs irrigation | Jobs water supply, pressurization systems, irrigation | Jobs water supply, pressurization systems, irrigation |
| Max. liquid temperature (°C) | Max. liquid temperature (°C) +90°C, +40°C | Max. liquid temperature (°C) 35 | Max. liquid temperature (°C) 35 |
| Motor voltage | Motor voltage 230 V | Motor voltage -- | Motor voltage -- |
| Height (cm) | Height (cm) 18.5 | Height (cm) 73.7 | Height (cm) 62.7 |
| Width (cm) | Width (cm) 20.5 | Width (cm) -- | Width (cm) -- |
| Depth (cm) | Depth (cm) 48.6 | Depth (cm) -- | Depth (cm) -- |
| External diameter (cm) | External diameter (cm) -- | External diameter (cm) 10 | External diameter (cm) 10 |
| Weight (Kg) | Weight (Kg) 22.7 | Weight (Kg) 14.3 | Weight (Kg) 11.8 |
| Warranty (years) | Warranty (years) 2 | Warranty (years) 2 | Warranty (years) 2 |