FCRm 240/3 - 2 HP single-phase multi-impeller electric pump
Flow rate up to 240 l/min (14.4 m³/h). Head up to 77 m. 1.5 Kw (2 HP) motor.
The FCRm 240/3 multi-impeller electric pump is recommended for irrigating vegetable gardens or gardens.
This pump is recommended for pumping clean water and liquids that are not chemically aggressive towards the materials from which the pump is made.
The operation is very simple and reliable, as the movement of the impellers in the pumping body increases the pressure of the pumped water.
Due to its reliability and silence, the FCRm 240/3 is widely used in the domestic sector and in particular for the distribution of water in combination with small or medium-sized pressure tanks, for the irrigation of vegetable gardens or gardens.
The flow rate ranges from 20 to 240 liters per minute. The head ranges from 19 to 77 meters.
This pump has a 1¼" suction port and a 1" discharge port.
The FCRm 240/3 must be powered by a single-phase voltage, has a horsepower of 1.5 HP and the temperature of the liquid to be pumped ranges from -10 degrees centigrade up to +90.
The pump is made entirely of AISI 304 stainless steel which gives it good resistance and allows it to last over time.
The FCRm 240/3 must be installed indoors or in any case protected from the elements.
- Motor connection
- SINGLE PHASE
- Power (Kw)
- 1.5
- Power (HP)
- 2
- Absorption at 230V (A)
- 8.5
- Suction mouth
- 1 "1/4
- Delivery mouth
- 1 "
- Pump body
- AISI 304 stainless steel
- Number of impellers
- 2
- Crankshaft
- AISI 304 stainless steel
- Check valve
- No
- Degree of protection
- IP 44
- Min. flow rate (l./min.)
- 20
- Max. flow rate (l./min.)
- 240
- Min. head (m.)
- 19
- Max. head (m.)
- 77
- Jobs
- irrigation
- Max. liquid temperature (°C)
- +90°C
- Motor voltage
- 230 V
- Height (cm)
- 22.8
- Width (cm)
- 18.5
- Depth (cm)
- 44
- Weight (Kg)
- 19.2
- Warranty (years)
- 2
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6304 2RS-C3 |
| Opposite side motor bearing | 6204 ZZ-C3E |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-18 |
| LP diameter | 18 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump Body | EN 1.4301 stainless steel (AISI 304) |
| 2.1 - Seal holder cover | EN 1.4301 stainless steel (AISI 304) |
| 3.0 - Impeller | EN 1.4301 stainless steel (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | EN 1.4301 stainless steel (AISI 304) |
| 5.2 - Shim Ring | PTFE |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
 FCRm 240/3 - 2 HP single-phase multi-impeller electric pumpThis product Flow rate up to 240 l/min (14.4 m³/h). Head up to 77 m. 1.5 Kw (2 HP) motor. |  4BLOCKm 2/13 (30m) - 1 HP single-phase submersible electric pumpFlow rate up to 60 l/min (3.6 m³/h). Head up to 101 m. 0.75 Kw (1 HP) motor. 30 meters of cable. |  4BLOCKm 4/7 (20m) - 0.75 HP single-phase submersible electric pumpFlow rate up to 100 l/min (6 m³/h). Head up to 55 m. 0.55 Kw (0.75 HP) motor. 20 meters of cable. | |
|---|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Power (Kw) | Power (Kw) 1.5 | Power (Kw) 0.75 | Power (Kw) 0.55 |
| Power (HP) | Power (HP) 2 | Power (HP) 1 | Power (HP) 0.75 |
| Absorption at 230V (A) | Absorption at 230V (A) 8.5 | Absorption at 230V (A) 6 | Absorption at 230V (A) 4 |
| Capacitor | Capacitor -- | Capacitor 35 µF450 VL | Capacitor 20 µF450 VL |
| Suction mouth | Suction mouth 1 "1/4 | Suction mouth -- | Suction mouth -- |
| Delivery mouth | Delivery mouth 1 " | Delivery mouth 1 "1/4 | Delivery mouth 1 "1/4 |
| Pump body | Pump body AISI 304 stainless steel | Pump body AISI 304 stainless steel | Pump body AISI 304 stainless steel |
| Impeller | Impeller -- | Impeller Delrin | Impeller Lexan |
| Number of impellers | Number of impellers 2 | Number of impellers 12 | Number of impellers 6 |
| Crankshaft | Crankshaft AISI 304 stainless steel | Crankshaft -- | Crankshaft -- |
| Pump shaft | Pump shaft -- | Pump shaft AISI 304 stainless steel | Pump shaft AISI 304 stainless steel |
| Check valve | Check valve No | Check valve No | Check valve No |
| Degree of protection | Degree of protection IP 44 | Degree of protection IP 68 | Degree of protection IP 68 |
| Min. flow rate (l./min.) | Min. flow rate (l./min.) 20 | Min. flow rate (l./min.) 10 | Min. flow rate (l./min.) 20 |
| Max. flow rate (l./min.) | Max. flow rate (l./min.) 240 | Max. flow rate (l./min.) 60 | Max. flow rate (l./min.) 100 |
| Min. head (m.) | Min. head (m.) 19 | Min. head (m.) 38.5 | Min. head (m.) 17.5 |
| Max. head (m.) | Max. head (m.) 77 | Max. head (m.) 101 | Max. head (m.) 55 |
| Cable length (m) | Cable length (m) -- | Cable length (m) 30 | Cable length (m) 20 |
| Jobs | Jobs irrigation | Jobs irrigation | Jobs water supply, pressurization systems, irrigation |
| Max. liquid temperature (°C) | Max. liquid temperature (°C) +90°C | Max. liquid temperature (°C) 35 | Max. liquid temperature (°C) 35 |
| Motor voltage | Motor voltage 230 V | Motor voltage -- | Motor voltage -- |
| Height (cm) | Height (cm) 22.8 | Height (cm) 73.7 | Height (cm) 62.7 |
| Width (cm) | Width (cm) 18.5 | Width (cm) -- | Width (cm) -- |
| Depth (cm) | Depth (cm) 44 | Depth (cm) -- | Depth (cm) -- |
| External diameter (cm) | External diameter (cm) -- | External diameter (cm) 10 | External diameter (cm) 10 |
| Weight (Kg) | Weight (Kg) 19.2 | Weight (Kg) 14.3 | Weight (Kg) 11.8 |
| Warranty (years) | Warranty (years) 2 | Warranty (years) 2 | Warranty (years) 2 |
