HT 10/6 - 4 HP three-phase vertical multistage electric pump
Flow rate up to 250 l/min (12 m³/h). Head up to 93 m. 3 Kw (4 HP) motor.
The HT 10/6 multi-impeller centrifugal electric pump by Pedrollo is ideal for applications in the domestic, civil, agricultural and industrial fields.
Recommended for pumping clean water and liquids that are not chemically aggressive towards the materials from which the pump is made.
This electric pump is designed to ensure high hydraulic performance combined with a mechanical construction that is robust and compact.
The silence and great reliability make the HT 10/6 ideal for applications in the domestic, civil and agricultural fields, in particular for the distribution of water in combination with pressure tanks, for increasing pressure in the network, for fire-fighting systems, for washing systems and for irrigation.
The flow rate ranges from 30 to 250 liters per minute. The head ranges from 26 to 93 meters.
The HT 10/6 must be powered by a three-phase voltage, has a horsepower of 4 HP and the temperature of the liquid to be pumped ranges from -15 degrees centigrade up to +90.
The pump is made of AISI 431 stainless steel, including the 3 impellers, and cast iron which guarantee good strength, resistance and allow it to last a long time.
With the multi-stage construction, the operating noise is particularly low.
The HT 10/6 must be installed indoors or in any case protected from the elements.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 3
- Power (HP)
- 4
- Absorption at 230V (A)
- Absorption at 400V (A)
- Suction mouth
- 1 "1/2
- Delivery port
- 1 "1/2
- Body Pump
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 3
- Motor shaft
- AISI 304 stainless steel
- Check valve
- no
- Degree of protection
- IP 44
- Flow rate min. (l./min.)
- Max flow (l./min.)
- Min head (m.)
- Max head (m.)
- Employments
- water supply, fire prevention systems, washing systems, pressurization systems, irrigation
- Liquid temperature max. (° C)
- Motor voltage
- 230 V, 400 V
- Height (cm)
- Width (cm)
- Depth (cm)
- Weight kg)
- Guarantee
- 2
Bearings
| Pump side motor bearing | 6307 2RS-C3 |
| Opposite side engine bearing | 6206 2RS-C3 |
Tree holding
| Type of seal | Single Mechanical Seal |
| Shrinkage DN1=450 DN2=350 | FN-18 |
| LP diameter | 18 |
| LP fixed ring | Graphite |
| LP rotating ring | Ceramic |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 250 EN 1561 |
| 2.0 - Lid | Cast iron GJL 250 EN 1561 |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | Stainless steel EN 1.4301 (AISI 304) |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
 HT 10/6 - 4 HP three-phase vertical multistage electric pumpThis product Flow rate up to 250 l/min (12 m³/h). Head up to 93 m. 3 Kw (4 HP) motor. |  4BLOCKm 6/5 (30m) - 0.75 HP single-phase submersible electric pumpFlow rate up to 150 l/min (9 m³/h). Head up to 32.5 m. 0.55 Kw (0.75 HP) motor. 30 meters of cable. |  4BLOCKm 6/7 (30m) - 1 HP single-phase submersible electric pumpFlow rate up to 150 l/min (9 m³/h). Head up to 45.5 m. 0.75 Kw (1 HP) motor. 30 meters of cable. |  4BLOCKm 6/10 (20m) - 1.5 HP single-phase submersible electric pumpFlow rate up to 150 l/min (9 m³/h). Head up to 65 m. 1.1 Kw (1.5 HP) motor. 20 meters of cable. | |
|---|---|---|---|---|
| Motor connection | Motor connection THREE-PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Power (Kw) | Power (Kw) 3 | Power (Kw) 0.55 | Power (Kw) 0.75 | Power (Kw) 1.1 |
| Power (HP) | Power (HP) 4 | Power (HP) 0.75 | Power (HP) 1 | Power (HP) 1.5 |
| Absorption at 230V (A) | Absorption at 230V (A) -- | Absorption at 230V (A) 5 | Absorption at 230V (A) 6 | Absorption at 230V (A) 8 |
| Capacitor | Capacitor -- | Capacitor 20 µF450 VL | Capacitor 35 µF450 VL | Capacitor 35 µF450 VL |
| Absorption at 400V (A) | Absorption at 400V (A) -- | Absorption at 400V (A) -- | Absorption at 400V (A) -- | Absorption at 400V (A) -- |
| Suction mouth | Suction mouth 1 "1/2 | Suction mouth -- | Suction mouth -- | Suction mouth -- |
| Delivery port | Delivery port 1 "1/2 | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/4 |
| Body Pump | Body Pump Cast iron | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel |
| Impeller | Impeller AISI 304 stainless steel | Impeller Delrin | Impeller Delrin | Impeller Delrin |
| Number of impellers | Number of impellers 3 | Number of impellers 5 | Number of impellers 7 | Number of impellers 10 |
| Motor shaft | Motor shaft AISI 304 stainless steel | Motor shaft -- | Motor shaft -- | Motor shaft -- |
| Pump shaft | Pump shaft -- | Pump shaft AISI 304 stainless steel | Pump shaft AISI 304 stainless steel | Pump shaft AISI 304 stainless steel |
| Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
| Degree of protection | Degree of protection IP 44 | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) -- | Flow rate min. (l./min.) 25 | Flow rate min. (l./min.) 25 | Flow rate min. (l./min.) 25 |
| Max flow (l./min.) | Max flow (l./min.) -- | Max flow (l./min.) 150 | Max flow (l./min.) 150 | Max flow (l./min.) 150 |
| Min head (m.) | Min head (m.) -- | Min head (m.) 10 | Min head (m.) 14.5 | Min head (m.) 20.5 |
| Max head (m.) | Max head (m.) -- | Max head (m.) 32.5 | Max head (m.) 45.5 | Max head (m.) 63 |
| Cable length (m) | Cable length (m) -- | Cable length (m) 20 | Cable length (m) 20 | Cable length (m) 20 |
| Employments | Employments water supply, fire prevention systems, washing systems, pressurization systems, irrigation | Employments water supply, pressurization systems, irrigation | Employments water supply, pressurization systems, irrigation | Employments water supply, pressurization systems, irrigation |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) -- | Liquid temperature max. (° C) +35°C | Liquid temperature max. (° C) +35°C | Liquid temperature max. (° C) 35 |
| Motor voltage | Motor voltage 230 V, 400 V | Motor voltage -- | Motor voltage -- | Motor voltage -- |
| Height (cm) | Height (cm) -- | Height (cm) 63.5 | Height (cm) 71.8 | Height (cm) 88.7 |
| Width (cm) | Width (cm) -- | Width (cm) -- | Width (cm) -- | Width (cm) -- |
| Depth (cm) | Depth (cm) -- | Depth (cm) -- | Depth (cm) -- | Depth (cm) -- |
| Outside diameter (cm) | Outside diameter (cm) -- | Outside diameter (cm) 10 | Outside diameter (cm) 10 | Outside diameter (cm) 10 |
| Weight kg) | Weight kg) -- | Weight kg) 11.8 | Weight kg) 13.1 | Weight kg) 16.5 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |
