PKm 65 - Single-phase peripheral impeller electric pump 0.75 HP
Flow rate up to 50 l/min (3 m³/h). Head up to 50 m. 0.55 Kw (0.75 HP) motor.
The Pedrollo PKm 65 peripheral electric pump is suitable for irrigation of vegetable gardens and gardens.
Recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive for the materials from which the pump is made.
Suitable for water distribution in conjunction with small pressure tanks.
The flow rate ranges from 5 to 50 litres per hour and the head ranges from 8 to 50 metres.
The PKm 65 pump has the advantage of being small and compact. Compared to the previous version, the pump is 20% less noisy.
Compared to the previous model, the new version is less noisy.
In production for over 50 years and with millions of units sold, it is the most economical and versatile product produced by Pedrollo .
Installation must be carried out indoors or in any case protected from the elements.
- Motor connection
- SINGLE PHASE
- Power (Kw)
- 0.55
- Power (HP)
- 0.75
- Absorption at 230V (A)
- 3.7
- Capacitor
- 14 µF450 VL
- Suction mouth
- 1 "
- Delivery port
- 1 "
- Body Pump
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 55
- Flow rate min. (l./min.)
- 5
- Max flow (l./min.)
- 50
- Min head (m.)
- 8
- Max head (m.)
- 55
- Employments
- water supply
- Liquid temperature max. (° C)
- +60°C
- Motor voltage
- 230 V
- Height (cm)
- 15.3
- Width (cm)
- 23.7
- Depth (cm)
- 10
- Weight kg)
- 6.6
- Guarantee
- 2
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6201 ZZ |
| Opposite side motor bearing | 6201 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | AR-12 |
| LP diameter | 12 |
| Fixed ring LP | Ceramic |
| Rotating ring LP | Graphite |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Brass CW617N EN 12165 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | DX53D EN 10346 galvanized steel |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
 PKm 65 - Single-phase peripheral impeller electric pump 0.75 HPThis product Flow rate up to 50 l/min (3 m³/h). Head up to 50 m. 0.55 Kw (0.75 HP) motor. |  4SR 2/17 S-HYD - 65 litre submersible pumpFlow rate up to 65 l/min (1.8 m³/h). Head up to 127 metres. WITHOUT ENGINE. |  4SR 4/6 S-HYD - 100 litre submersible pumpFlow rate up to 100 l/min (1.8 m³/h). Head up to 45.5 metres. WITHOUT ENGINE. | |
|---|---|---|---|
| Availability | Availability -- | Availability Last items in stock | Availability -- |
| Motor connection | Motor connection SINGLE PHASE | Motor connection -- | Motor connection -- |
| Power (Kw) | Power (Kw) 0.55 | Power (Kw) -- | Power (Kw) -- |
| Power (HP) | Power (HP) 0.75 | Power (HP) 1.5 | Power (HP) 0.75 |
| Absorption at 230V (A) | Absorption at 230V (A) 3.7 | Absorption at 230V (A) -- | Absorption at 230V (A) -- |
| Capacitor | Capacitor 14 µF450 VL | Capacitor -- | Capacitor -- |
| Suction mouth | Suction mouth 1 " | Suction mouth -- | Suction mouth -- |
| Delivery port | Delivery port 1 " | Delivery port 1 "1/4 | Delivery port 1 "1/4 |
| Body Pump | Body Pump Cast iron | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel |
| Impeller | Impeller Brass | Impeller Delrin | Impeller Delrin |
| Number of impellers | Number of impellers 1 | Number of impellers 17 | Number of impellers 6 |
| Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 304 stainless steel | Motor shaft -- |
| Pump shaft | Pump shaft -- | Pump shaft -- | Pump shaft AISI 304 stainless steel |
| Check valve | Check valve no | Check valve -- | Check valve -- |
| Degree of protection | Degree of protection IP 55 | Degree of protection -- | Degree of protection -- |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 5 | Flow rate min. (l./min.) 10 | Flow rate min. (l./min.) 20 |
| Max flow (l./min.) | Max flow (l./min.) 50 | Max flow (l./min.) 65 | Max flow (l./min.) 100 |
| Min head (m.) | Min head (m.) 8 | Min head (m.) 36.5 | Min head (m.) 17 |
| Max head (m.) | Max head (m.) 55 | Max head (m.) 127 | Max head (m.) 45.5 |
| Employments | Employments water supply | Employments -- | Employments -- |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) +60°C | Liquid temperature max. (° C) -- | Liquid temperature max. (° C) -- |
| Motor voltage | Motor voltage 230 V | Motor voltage -- | Motor voltage -- |
| Height (cm) | Height (cm) 15.3 | Height (cm) -- | Height (cm) -- |
| Width (cm) | Width (cm) 23.7 | Width (cm) -- | Width (cm) -- |
| Depth (cm) | Depth (cm) 10 | Depth (cm) -- | Depth (cm) -- |
| Outside diameter (cm) | Outside diameter (cm) -- | Outside diameter (cm) -- | Outside diameter (cm) -- |
| Weight kg) | Weight kg) 6.6 | Weight kg) -- | Weight kg) -- |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 |
Reviews (1) - Review moderation
Der Kunde hat keine Kommentare hinterlassen.
