chevron_left chevron_right
-42%
4HR10/7 - HYD - 250 liter submersible pump
Flow rate up to 250 l/min (1.8 m³/h). Head up to 40 metres.
WITHOUT ENGINE.
Original spare part for 4HR10/7.
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
Original replacement
Description
The PEDROLLO 4HR10/7 - HYD submersible pump is recommended for pumping clean water with a sand content not exceeding 150 g/m³.
It has a flow rate that varies from 50 to 250 liters per minute with a head from 10 to 40 metres.
Due to their high efficiency and reliability, they are suitable for use in the domestic, civil and industrial fields, for the distribution of water coupled with autoclaves, for irrigation, for washing systems, for increasing pressure and for fire extinguishing systems.
Original spare part for 4HR10/7.
Data sheet
- Power (HP)
- 1
- Delivery port
- 2"
- Body Pump
- AISI 304 stainless steel
- Impeller
- Delrin
- Number of impellers
- 7
- Pump shaft
- AISI 304 stainless steel
- Flow rate min. (l./min.)
- 50
- Max flow (l./min.)
- 250
- Min head (m.)
- 10
- Max head (m.)
- 40
- Height (cm)
- 66
- Outside diameter (cm)
- Guarantee
- 2
Compare with Similar Products
 4HR10/7 - HYD - 250 liter submersible pumpThis product Flow rate up to 250 l/min (1.8 m³/h). Head up to 40 metres. WITHOUT ENGINE. Original spare part for 4HR10/7. |  S110032020 - reduced coupling compression 32 x 20 |  S110040025 - reduced coupling compression 40 x 25 |  S110025016 - Sleeve reduced compression 25 x 16 | |
|---|---|---|---|---|
| Power (HP) | Power (HP) 1 | Power (HP) -- | Power (HP) -- | Power (HP) -- |
| Delivery port | Delivery port 2" | Delivery port -- | Delivery port -- | Delivery port -- |
| Body Pump | Body Pump AISI 304 stainless steel | Body Pump -- | Body Pump -- | Body Pump -- |
| Impeller | Impeller Delrin | Impeller -- | Impeller -- | Impeller -- |
| Number of impellers | Number of impellers 7 | Number of impellers -- | Number of impellers -- | Number of impellers -- |
| Pump shaft | Pump shaft AISI 304 stainless steel | Pump shaft -- | Pump shaft -- | Pump shaft -- |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 50 | Flow rate min. (l./min.) -- | Flow rate min. (l./min.) -- | Flow rate min. (l./min.) -- |
| Max flow (l./min.) | Max flow (l./min.) 250 | Max flow (l./min.) -- | Max flow (l./min.) -- | Max flow (l./min.) -- |
| Min head (m.) | Min head (m.) 10 | Min head (m.) -- | Min head (m.) -- | Min head (m.) -- |
| Max head (m.) | Max head (m.) 40 | Max head (m.) -- | Max head (m.) -- | Max head (m.) -- |
| Height (cm) | Height (cm) 66 | Height (cm) -- | Height (cm) -- | Height (cm) -- |
| Outside diameter (cm) | Outside diameter (cm) -- | Outside diameter (cm) -- | Outside diameter (cm) -- | Outside diameter (cm) -- |
| Guarantee | Guarantee 2 | Guarantee -- | Guarantee -- | Guarantee -- |
| Type of fitting | Type of fitting -- | Type of fitting Sleeve | Type of fitting Sleeve | Type of fitting Sleeve |