chevron_left chevron_right
-42%
F 80/250A - 75 HP three-phase standardized centrifugal electric pump
Flow rate up to 3900 l/min (234 m³/h). Head up to 88.5 m. 55 Kw (75 HP) motor.
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
We supply all spare parts on this product.
Description
Used for water supply, washing systems, pressurization, fire-fighting systems, irrigation, industry, water circulation in air conditioning systems, agriculture.
Installation must be carried out indoors or in any case protected from the elements.
Data sheet
- Motor connection
- THREE-PHASE
- Power (Kw)
- 55
- Power (HP)
- 75
- Absorption at 400V (A)
- 98
- Suction mouth
- 4 "
- Delivery port
- 3 "
- Body Pump
- Cast iron
- Impeller
- Cast iron
- Number of impellers
- 1
- Motor shaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- no
- Degree of protection
- IP 55
- Flow rate min. (l./min.)
- 600
- Max flow (l./min.)
- 3900
- Min head (m.)
- 60
- Max head (m.)
- 88.5
- Employments
- water supply, pressurization systems, irrigation, cooling systems, air conditioning systems, washing systems, fire prevention systems
- Liquid temperature max. (° C)
- 90
- Height (cm)
- 62
- Width (cm)
- 101.5
- Weight kg)
- 539
- Guarantee
- 2
Models and performances F 80/250
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the F 80/250A
Bearings
| Pump side motor bearing | 6314 ZZ-C3 |
| Opposite side engine bearing | 6313 ZZ-C3 |
Tree holding
| Type of seal | Single Mechanical Seal |
| Shrinkage DN1=450 DN2=350 | FH-45 NU |
| LP diameter | 45 |
| LP fixed ring | Graphite |
| LP rotating ring | Ceramic |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Cast iron GJL 200 EN 1561 |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | EN-AB 46100 aluminium |
| 6.1 - Engine cover | EN-AB 46100 aluminium |
| 7.0 - Lantern | Cast iron GJL 200 EN 1561 |
Compare with Similar Products
 F 80/250A - 75 HP three-phase standardized centrifugal electric pumpThis product Flow rate up to 3900 l/min (234 m³/h). Head up to 88.5 m. 55 Kw (75 HP) motor. |  118-1562 - Fixed angle nozzle 4.6 m radius 180 degreesMale attachment. Series Precision Spray Adj. | |
|---|---|---|
| Motor connection | Motor connection THREE-PHASE | Motor connection -- |
| Power (Kw) | Power (Kw) 55 | Power (Kw) -- |
| Power (HP) | Power (HP) 75 | Power (HP) -- |
| Absorption at 400V (A) | Absorption at 400V (A) 98 | Absorption at 400V (A) -- |
| Suction mouth | Suction mouth 4 " | Suction mouth -- |
| Delivery port | Delivery port 3 " | Delivery port -- |
| Body Pump | Body Pump Cast iron | Body Pump -- |
| Impeller | Impeller Cast iron | Impeller -- |
| Number of impellers | Number of impellers 1 | Number of impellers -- |
| Motor shaft | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft -- |
| Check valve | Check valve no | Check valve -- |
| Degree of protection | Degree of protection IP 55 | Degree of protection -- |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 600 | Flow rate min. (l./min.) -- |
| Max flow (l./min.) | Max flow (l./min.) 3900 | Max flow (l./min.) -- |
| Min head (m.) | Min head (m.) 60 | Min head (m.) -- |
| Max head (m.) | Max head (m.) 88.5 | Max head (m.) -- |
| Max range (m) | Max range (m) -- | Max range (m) 4.6 |
| Working angle | Working angle -- | Working angle fixed |
| Angolo di lavoro | Angolo di lavoro -- | Angolo di lavoro 180 |
| Employments | Employments water supply, pressurization systems, irrigation, cooling systems, air conditioning systems, washing systems, fire prevention systems | Employments -- |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 90 | Liquid temperature max. (° C) -- |
| Height (cm) | Height (cm) 62 | Height (cm) -- |
| Width (cm) | Width (cm) 101.5 | Width (cm) -- |
| Weight kg) | Weight kg) 539 | Weight kg) -- |
| Guarantee | Guarantee 2 | Guarantee -- |