BCm 10/50 (10m) - 1 HP single-phase DOUBLE-CHANNEL electric pump for waste water
Flow rate up to 600 l/min (36 m³/h). Head up to 12 m. 0.75 Kw (1 HP) motor. 10 meters of cable with shuko plug.
The BC submersible pump is recommended for draining dirty and sewage water in the domestic and civil sectors. It is equipped with a DOUBLE-CHANNEL stainless steel impeller that allows the pumping of liquids with the presence of suspended solids up to Ø 50 mm, with short fibers.
It is suitable for conveying waste water and sewage, waste water, surface water, water mixed with mud in uses such as: holiday homes, villas and single-family homes.
This pump stands out for its reliability, especially in fixed installations with automatic operation.
- Motor connection
- SINGLE PHASE
- Power (Kw)
- 0.75
- Power (HP)
- 1
- Absorption at 230V (A)
- 5
- Capacitor
- 20 µF450 VL
- Delivery port
- 2"
- Body Pump
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 50
- Max flow (l./min.)
- 600
- Min head (m.)
- 2
- Max head (m.)
- 12
- Cable length (m)
- 10
- Employments
- drainage, slightly dirty waters
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 43.1
- Weight kg)
- 14.9
- Guarantee
- 2
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Compare with Similar Products
 BCm 10/50 (10m) - 1 HP single-phase DOUBLE-CHANNEL electric pump for waste waterThis product Flow rate up to 600 l/min (36 m³/h). Head up to 12 m. 0.75 Kw (1 HP) motor. 10 meters of cable with shuko plug. | |
|---|---|
| Motor connection | Motor connection SINGLE PHASE |
| Power (Kw) | Power (Kw) 0.75 |
| Power (HP) | Power (HP) 1 |
| Absorption at 230V (A) | Absorption at 230V (A) 5 |
| Capacitor | Capacitor 20 µF450 VL |
| Delivery port | Delivery port 2" |
| Body Pump | Body Pump Cast iron |
| Impeller | Impeller AISI 304 stainless steel |
| Number of impellers | Number of impellers 1 |
| Motor shaft | Motor shaft AISI 431 stainless steel |
| Check valve | Check valve no |
| Degree of protection | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 50 |
| Max flow (l./min.) | Max flow (l./min.) 600 |
| Min head (m.) | Min head (m.) 2 |
| Max head (m.) | Max head (m.) 12 |
| Cable length (m) | Cable length (m) 10 |
| Employments | Employments drainage, slightly dirty waters |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 |
| Height (cm) | Height (cm) 43.1 |
| Weight kg) | Weight kg) 14.9 |
| Guarantee | Guarantee 2 |