chevron_left chevron_right
-42%
TOP 1 - FLOOR (10m) - 0.33 HP clear water drainage electric pump
Flow rate up to 120 l/min (7.2 m³/h). Head up to 6.5 m. 0.25 Kw (0.33 HP) motor. 10 meters of cable with shuko plug.
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
We supply all spare parts on this product.
Description
The TOP-FLOOR series is suitable for the drainage of clear water without abrasive particles.
Thanks to their ability to suck up water up to 2 millimetres from the bottom, they are suitable for emergency domestic use in small flooded areas and in all those applications where maximum levels of drainage are required.
Data sheet
- Motor connection
- SINGLE PHASE
- Power (HP)
- 0.33
- Absorption at 230V (A)
- 1.5
- Capacitor
- 10 µF450 VL
- Delivery port
- 1 "1/4
- Body Pump
- Technopolymer
- Impeller
- Noryl
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 20
- Max flow (l./min.)
- 120
- Min head (m.)
- 1
- Max head (m.)
- 7
- Employments
- drainage, drying up
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 25.7
- Width (cm)
- 15.2
- Weight kg)
- 5
- Guarantee
- 2
TOP models and performances - FLOOR
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the TOP series
Bearings
| Pump side motor bearing | 6201 ZZ |
| Opposite side engine bearing | 6201 ZZ |
Tree holding
| Type of seal | Double Seal: Mechanical and Lip with oil chamber |
| Engine side model | Lip seal |
| LM diameter | 12 |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | STA-12R |
| LP diameter | 12 |
| LP fixed ring | Ceramic |
| LP rotating ring | Graphite |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Reinforced technopolymer |
| 2.2 - Suction cover | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Reinforced technopolymer |
Compare with Similar Products
 TOP 1 - FLOOR (10m) - 0.33 HP clear water drainage electric pumpThis product Flow rate up to 120 l/min (7.2 m³/h). Head up to 6.5 m. 0.25 Kw (0.33 HP) motor. 10 meters of cable with shuko plug. |  TOP 3 - FLOOR (10m) - 0.75 HP clear water drainage pumpFlow rate up to 170 l/min (10.2 m³/h). Head up to 10.4 m. 0.55 Kw (0.75 HP) motor. 10 meters of cable with shuko plug. |  TOP 2 - FLOOR (10m) - 0.50 HP clear water drainage electric pumpFlow rate up to 150 l/min (9.6 m³/h). Head up to 8.5 m. 0.37 Kw (0.50 HP) motor. 10 meters of cable with shuko plug. | |
|---|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Power (Kw) | Power (Kw) -- | Power (Kw) 0.55 | Power (Kw) -- |
| Power (HP) | Power (HP) 0.33 | Power (HP) 0.75 | Power (HP) 0.50 |
| Absorption at 230V (A) | Absorption at 230V (A) 1.5 | Absorption at 230V (A) 2 | Absorption at 230V (A) 2 |
| Capacitor | Capacitor 10 µF450 VL | Capacitor -- | Capacitor 10 µF450 VL |
| Delivery port | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/4 |
| Body Pump | Body Pump Technopolymer | Body Pump Technopolymer | Body Pump Technopolymer |
| Impeller | Impeller Noryl | Impeller Noryl | Impeller Noryl |
| Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
| Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft Stainless steel EN 10088-3 1.4104 | Motor shaft Stainless steel EN 10088-3 1.4104 |
| Check valve | Check valve no | Check valve Yes | Check valve Yes |
| Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 20 |
| Max flow (l./min.) | Max flow (l./min.) 120 | Max flow (l./min.) 160 | Max flow (l./min.) 160 |
| Min head (m.) | Min head (m.) 1 | Min head (m.) 1 | Min head (m.) 1 |
| Max head (m.) | Max head (m.) 7 | Max head (m.) 9 | Max head (m.) 9 |
| Cable length (m) | Cable length (m) -- | Cable length (m) 10 | Cable length (m) 10 |
| Employments | Employments drainage, drying up | Employments drainage, drying up | Employments drainage, drying up |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) 40 |
| Height (cm) | Height (cm) 25.7 | Height (cm) 25.7 | Height (cm) 25.7 |
| Width (cm) | Width (cm) 15.2 | Width (cm) 15.2 | Width (cm) 15.2 |
| Depth (cm) | Depth (cm) -- | Depth (cm) -- | Depth (cm) -- |
| Weight kg) | Weight kg) 5 | Weight kg) 5 | Weight kg) 5 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 |
