TOP 3 - FLOOR (10m) - 0.75 HP clear water drainage pump
Flow rate up to 170 l/min (10.2 m³/h). Head up to 10.4 m. 0.55 Kw (0.75 HP) motor. 10 meters of cable with shuko plug.




The TOP 3-FLOOR submersible electric pump by Pedrollo is recommended for the domestic sector.
Suitable for draining clear water without abrasive particles.
The TOP 3-FLOOR, thanks to its ability to suck water up to 2 millimetres from the bottom, this electric pump is suitable for emergency domestic use in small flooded areas and in all those applications where maximum levels of drainage are required.
The electric pump is complete with a 5-meter power cable and can be used up to 3 meters below the water level.
The flow rate ranges from 20 to 170 liters per minute. The head ranges from 2.6 to 10.4 meters.
It must be powered by a single-phase voltage, has a horsepower of 0.75 HP and the temperature of the liquid to be pumped ranges from -10 degrees centigrade up to +40.
The construction of the TOP 3-FLOOR is solid and robust as Pedrollo has used stainless steel which allows it to last over time.
- Motor connection
- SINGLE PHASE
- Power (Kw)
- 0.55
- Power (HP)
- 0.75
- Absorption at 230V (A)
- 3.1
- Delivery mouth
- 1 "1/4
- Pump body
- Technopolymer
- Impeller
- Noryl
- Number of impellers
- 1
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- Yes
- Degree of protection
- IP 68
- Min. flow rate (l./min.)
- 20
- Max. flow rate (l./min.)
- 170
- Min. head (m.)
- 2.6
- Max. head (m.)
- 10.4
- Cable length (m)
- 10
- Jobs
- drainage, drying up
- Max. liquid temperature (°C)
- 40
- Height (cm)
- 28.7
- Width (cm)
- 15.2
- Depth (cm)
- 15.2
- Weight (Kg)
- 6.6
- Warranty (years)
- 2
|
|
|
|
|
|

Bearings
Pump side motor bearing | 6201 ZZ |
Opposite side engine bearing | 6201 ZZ |
Tree holding
Type of seal | Double Seal: Mechanical and Lip with oil chamber |
Engine side model | Lip seal |
LM diameter | 12 |
LM elastomer | NBR |
Shrinkage DN1=450 DN2=350 | STA-12R |
LP diameter | 12 |
LP fixed ring | Ceramic |
LP rotating ring | Graphite |
LP elastomer | NBR |
Materials
1.0 - Pump body | Reinforced technopolymer |
2.2 - Suction cover | Stainless steel EN 1.4301 (AISI 304) |
3.0 - Impeller | Reinforced technopolymer |
4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
5.1 - Diffuser | Reinforced technopolymer |
6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
8.0 - Suction Grid/Filter | Reinforced technopolymer |
Compare with Similar Products
![]() TOP 3 - FLOOR (10m) - 0.75 HP clear water drainage pumpThis product Flow rate up to 170 l/min (10.2 m³/h). Head up to 10.4 m. 0.55 Kw (0.75 HP) motor. 10 meters of cable with shuko plug. | ![]() TOP 1 - FLOOR (10m) - 0.33 HP clear water drainage electric pumpFlow rate up to 120 l/min (7.2 m³/h). Head up to 6.5 m. 0.25 Kw (0.33 HP) motor. 10 meters of cable with shuko plug. | ![]() TOP 2 - FLOOR (10m) - 0.50 HP clear water drainage electric pumpFlow rate up to 150 l/min (9.6 m³/h). Head up to 8.5 m. 0.37 Kw (0.50 HP) motor. 10 meters of cable with shuko plug. | |
---|---|---|---|
Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
Power (Kw) | Power (Kw) 0.55 | Power (Kw) -- | Power (Kw) -- |
Power (HP) | Power (HP) 0.75 | Power (HP) 0.33 | Power (HP) 0.50 |
Absorption at 230V (A) | Absorption at 230V (A) 3.1 | Absorption at 230V (A) 1.5 | Absorption at 230V (A) 2 |
Capacitor | Capacitor -- | Capacitor 10 µF450 VL | Capacitor 10 µF450 VL |
Delivery mouth | Delivery mouth 1 "1/4 | Delivery mouth 1 "1/4 | Delivery mouth 1 "1/4 |
Pump body | Pump body Technopolymer | Pump body Technopolymer | Pump body Technopolymer |
Impeller | Impeller Noryl | Impeller Noryl | Impeller Noryl |
Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
Crankshaft | Crankshaft Stainless steel EN 10088-3 1.4104 | Crankshaft AISI 431 stainless steel | Crankshaft Stainless steel EN 10088-3 1.4104 |
Check valve | Check valve Yes | Check valve No | Check valve Yes |
Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
Min. flow rate (l./min.) | Min. flow rate (l./min.) 20 | Min. flow rate (l./min.) 20 | Min. flow rate (l./min.) 20 |
Max. flow rate (l./min.) | Max. flow rate (l./min.) 170 | Max. flow rate (l./min.) 120 | Max. flow rate (l./min.) 150 |
Min. head (m.) | Min. head (m.) 2.6 | Min. head (m.) 2 | Min. head (m.) 2.4 |
Max. head (m.) | Max. head (m.) 10.4 | Max. head (m.) 6.5 | Max. head (m.) 8.5 |
Cable length (m) | Cable length (m) 10 | Cable length (m) -- | Cable length (m) 10 |
Jobs | Jobs drainage, drying up | Jobs drainage, drying up | Jobs drainage, drying up |
Max. liquid temperature (°C) | Max. liquid temperature (°C) 40 | Max. liquid temperature (°C) 40 | Max. liquid temperature (°C) 40 |
Height (cm) | Height (cm) 28.7 | Height (cm) 25.7 | Height (cm) 25.7 |
Width (cm) | Width (cm) 15.2 | Width (cm) 15.2 | Width (cm) 15.2 |
Depth (cm) | Depth (cm) 15.2 | Depth (cm) -- | Depth (cm) -- |
Weight (Kg) | Weight (Kg) 6.6 | Weight (Kg) 5.1 | Weight (Kg) 5 |
Warranty (years) | Warranty (years) 2 | Warranty (years) 2 | Warranty (years) 2 |