TIGm 0.55 - Submersible electric pump with single-phase grinder 0.75 HP
Flow rate up to 130 l/min (7.2 m³/h). Head up to 16 m. 0.55 Kw (0.75 HP) motor.
The Pedrollo TIGm 0.55 single-phase grinder pump is ideal for working safely when working conditions become challenging.
The TIGm 0.55 pump of the TRITUS-INOX series is equipped with a high-tempered stainless steel grinder that allows for the complete grinding of solid bodies and fibres contained in waste water and waste water in the domestic and civil sectors, for conveying under pressure into the sewer system through small diameter pipes.
The maximum flow rate is 130 litres per minute and the head is up to 16 metres.
The pump is equipped with a 10 meter cable, it can be immersed up to 5 meters underwater.
It has an IP68 certification which is safe from dust and water ingress.
- Motor connection
- SINGLE PHASE
- Power (Kw)
- 0.55
- Power (HP)
- 0.75
- Absorption at 230V (A)
- Delivery port
- 1 "1/2
- Body Pump
- Cast iron
- Impeller
- Technopolymer
- Number of impellers
- 1
- Motor shaft
- AISI 431 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- Max flow (l./min.)
- Min head (m.)
- Max head (m.)
- Cable length (m)
- Employments
- slightly dirty waters, drainage, drying up
- Liquid temperature max. (° C)
- Height (cm)
- Width (cm)
- Depth (cm)
- Weight kg)
- Guarantee
- 2
Construction
Bearings
| Pump side motor bearing | 6303 2RS-C3 |
| Opposite side engine bearing | 6203 ZZ-C3E |
Tree seal
| Type of seal | Double Mechanical Seal in oil chamber |
| LM diameter | 14 |
| LM fixed ring | Silicon Carbide |
| LM rotating ring | Graphite |
| LM Elastomer | NBR |
| Narrowing DN1=450 DN2=350 | MG1-14D SIC |
| LP diameter | 14 |
| LP fixed ring | Silicon Carbide |
| LP Rotating Ring | Silicon Carbide |
| LP Elastomer | NBR |
Materials
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Technopolymer |
| 3.2 - Shredder | Stainless steel EN 1.4125 (AISI 440C) hardened |
| 4.0 - Pump Tree | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Engine carrier | Stainless steel EN 1.4301 (AISI 304) |
| 7.0 - Lantern | Cast iron GJL 200 EN 1561 |
Compare with Similar Products
 TIGm 0.55 - Submersible electric pump with single-phase grinder 0.75 HPThis product Flow rate up to 130 l/min (7.2 m³/h). Head up to 16 m. 0.55 Kw (0.75 HP) motor. |  NK 2/2 (10m) - Three-phase submersible electric pump 400 V 0.50 HPFlow rate up to 80 l/min (4.8 m³/h). Head up to 33 m. 0.37 Kw (0.5 HP) motor. 10 meters of cable. |  4SRm 1.5/22 S-PD - 1.5 HP single-phase submersible electric pumpFlow rate up to 45 l/min (2.7 m³/h). Head up to 158 meters. 1.1 Kw (1.5 HP) motor. |  4SR 1.5/22 S-PD - 1.5 HP three-phase submersible electric pumpFlow rate up to 45 l/min (2.7 m³/h). Head up to 158 meters. 1.1 Kw (1.5 HP) motor. | |
|---|---|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection THREE-PHASE | Motor connection SINGLE PHASE | Motor connection THREE-PHASE |
| Power (Kw) | Power (Kw) 0.55 | Power (Kw) 0.37 | Power (Kw) 1.1 | Power (Kw) 1.1 |
| Power (HP) | Power (HP) 0.75 | Power (HP) 0.50 | Power (HP) 1.5 | Power (HP) 1.5 |
| Absorption at 230V (A) | Absorption at 230V (A) -- | Absorption at 230V (A) -- | Absorption at 230V (A) -- | Absorption at 230V (A) -- |
| Absorption at 400V (A) | Absorption at 400V (A) -- | Absorption at 400V (A) 1.6 | Absorption at 400V (A) -- | Absorption at 400V (A) -- |
| Delivery port | Delivery port 1 "1/2 | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/4 |
| Body Pump | Body Pump Cast iron | Body Pump AISI 304 stainless steel | Body Pump -- | Body Pump -- |
| Impeller | Impeller Technopolymer | Impeller Noryl | Impeller -- | Impeller -- |
| Number of impellers | Number of impellers 1 | Number of impellers 2 | Number of impellers -- | Number of impellers -- |
| Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft AISI 431 stainless steel | Motor shaft -- | Motor shaft -- |
| Check valve | Check valve no | Check valve no | Check valve -- | Check valve -- |
| Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) -- | Flow rate min. (l./min.) 20 | Flow rate min. (l./min.) 5 | Flow rate min. (l./min.) 5 |
| Max flow (l./min.) | Max flow (l./min.) -- | Max flow (l./min.) 80 | Max flow (l./min.) 45 | Max flow (l./min.) 45 |
| Min head (m.) | Min head (m.) -- | Min head (m.) 17 | Min head (m.) 52.5 | Min head (m.) 52.5 |
| Max head (m.) | Max head (m.) -- | Max head (m.) 33 | Max head (m.) 154 | Max head (m.) 154 |
| Cable length (m) | Cable length (m) -- | Cable length (m) 10 | Cable length (m) 2 | Cable length (m) 2 |
| Employments | Employments slightly dirty waters, drainage, drying up | Employments water supply, pressurization systems, irrigation | Employments irrigation | Employments irrigation |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) -- | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) -- | Liquid temperature max. (° C) -- |
| Height (cm) | Height (cm) -- | Height (cm) 45.9 | Height (cm) -- | Height (cm) -- |
| Width (cm) | Width (cm) -- | Width (cm) -- | Width (cm) -- | Width (cm) -- |
| Depth (cm) | Depth (cm) -- | Depth (cm) -- | Depth (cm) -- | Depth (cm) -- |
| Outside diameter (cm) | Outside diameter (cm) -- | Outside diameter (cm) 13.5 | Outside diameter (cm) -- | Outside diameter (cm) -- |
| Weight kg) | Weight kg) -- | Weight kg) 13.8 | Weight kg) 17 | Weight kg) 17 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |
