chevron_left chevron_right
4BLOCKm 6/7 (20m) - 1 HP single-phase submersible pump
Flow rate up to 150 l / min (9 m³ / h). Head up to 44 m. 0.75 Kw (1 HP) motor. 20 meters of cable.
Telephone support for information before purchasing.
Reinforced packaging to reduce transport damage.
After-sales assistance for product installation.
We supply all spare parts on this product.
Description
Monobloc submersible electric pump in stainless steel ready to install.
It is complete with: condenser, built-in thermal overload protector and 20 meter power cable.
The PEDROLLO 4BLOCKm 6/7 has a flow rate that varies from 25 to 150 liters per minute with a prevalence from 14.5 to 44 meters.
It is recommended for supplying clean water from wells even in the presence of sand (up to 150 g / m³).
Due to its high performance and reliability it is recommended for use in the domestic sector, for the automatic distribution of water in conjunction with autoclaves, for irrigation, etc.
Data sheet
- Motor connection
- SINGLE PHASE
- Motor power (HP)
- 1
- Absorption at 230V (A)
- 6
- Capacitor
- 31.5 µF450 VL
- Delivery port
- 1 "1/4
- Body Pump
- AISI 304 stainless steel
- Impeller
- Delrin
- Number of impellers
- 7
- Pump shaft
- AISI 304 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 25
- Max flow (l./min.)
- 150
- Min head (m.)
- 14.5
- Max head (m.)
- 44
- Cable length (m)
- 20
- Employments
- pressurization systems, irrigation, water supply
- Liquid temperature max. (° C)
- 35
- Height (cm)
- 72.5
- Outside diameter (cm)
- 10
- Weight kg)
- 13.3
- Guarantee
- 2
4BLOCKm models and performances 6
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the 4BLOCK series
Bearings
| Pump side motor bearing | 6203 |
| Opposite side engine bearing | 6203 |
Tree holding
| Type of seal | Single Mechanical Seal in oil chamber |
| Engine side model | ST1-16 |
| LM diameter | 16 |
| LM fixed ring | Ceramic |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
Materials
| 1.3 - Delivery body | Stainless steel EN 1.4301 (AISI 304) |
| 2.1 - Seal holder cover | Brass CW617N EN 12165 |
| 3.0 - Impeller | POM acetal resin |
| 4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
| 4.1 - Crankshaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.0 - Stadium box | Stainless steel EN 1.4301 (AISI 304) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 6.2 - Engine sleeve | Stainless steel EN 1.4301 (AISI 304) |
| 7.0 - Lantern | Reinforced technopolymer |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
| 7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
 4BLOCKm 6/7 (20m) - 1 HP single-phase submersible pumpThis product Flow rate up to 150 l / min (9 m³ / h). Head up to 44 m. 0.75 Kw (1 HP) motor. 20 meters of cable. |  4BLOCKm 6/5 (20m) - 0.75 HP single-phase submersible pumpFlow rate up to 150 l / min (9 m³ / h). Head up to 31.5 m. 0.55 Kw (0.75 HP) motor. 20 meters of cable. |  4BLOCKm 6/10 (20m) - 1.5 HP single-phase submersible pumpFlow rate up to 150 l / min (9 m³ / h). Head up to 63 m. 1.1 Kw (1.5 HP) engine. 20 meters of cable. |  4BLOCKm 8/3 (20m) - 0.75 HP single-phase submersible pumpFlow rate up to 200 l / min (12 m³ / h). Head up to 20 m. 0.55 Kw (0.75 HP) motor. 20 meters of cable | |
|---|---|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Motor power (HP) | Motor power (HP) 1 | Motor power (HP) 0.75 | Motor power (HP) 1.5 | Motor power (HP) 0.75 |
| Absorption at 230V (A) | Absorption at 230V (A) 6 | Absorption at 230V (A) 5 | Absorption at 230V (A) 8 | Absorption at 230V (A) 4 |
| Capacitor | Capacitor 31.5 µF450 VL | Capacitor 20 µF450 VL | Capacitor 35 µF450 VL | Capacitor 20 µF450 VL |
| Delivery port | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/4 |
| Body Pump | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel |
| Impeller | Impeller Delrin | Impeller Delrin | Impeller Delrin | Impeller Delrin |
| Number of impellers | Number of impellers 7 | Number of impellers 5 | Number of impellers 10 | Number of impellers 3 |
| Pump shaft | Pump shaft AISI 304 stainless steel | Pump shaft AISI 304 stainless steel | Pump shaft AISI 304 stainless steel | Pump shaft AISI 304 stainless steel |
| Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
| Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 25 | Flow rate min. (l./min.) 25 | Flow rate min. (l./min.) 25 | Flow rate min. (l./min.) 40 |
| Max flow (l./min.) | Max flow (l./min.) 150 | Max flow (l./min.) 150 | Max flow (l./min.) 150 | Max flow (l./min.) 200 |
| Min head (m.) | Min head (m.) 14.5 | Min head (m.) 10 | Min head (m.) 20.5 | Min head (m.) 4 |
| Max head (m.) | Max head (m.) 44 | Max head (m.) 31.5 | Max head (m.) 63 | Max head (m.) 21 |
| Cable length (m) | Cable length (m) 20 | Cable length (m) 20 | Cable length (m) 20 | Cable length (m) 20 |
| Employments | Employments pressurization systems, irrigation, water supply | Employments pressurization systems, irrigation, water supply | Employments pressurization systems, irrigation, water supply | Employments water supply, pressurization systems, irrigation |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 35 | Liquid temperature max. (° C) 35 | Liquid temperature max. (° C) 35 | Liquid temperature max. (° C) +35°C |
| Height (cm) | Height (cm) 72.5 | Height (cm) 64.1 | Height (cm) 88.7 | Height (cm) 57.2 |
| Outside diameter (cm) | Outside diameter (cm) 10 | Outside diameter (cm) 10 | Outside diameter (cm) 10 | Outside diameter (cm) 10 |
| Weight kg) | Weight kg) 13.3 | Weight kg) 10.7 | Weight kg) 16.5 | Weight kg) 10.6 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |
Related Products
-
Brio Top 2.0 - Electronic...
For pumps up to 3 HP. With 1" male connection. With pressure gauge. With auto reset.
€105.69Restart pressure (bar) from 0.5 to 8 bar Line current 16 A Motor phase current 16 A Attack size 1 " Type of attack male -
PRESFLO MULTI - Electronic...
For pumps up to 2 HP. Inlet port 1" M. Outlet port 1" F . Without pressure gauge. With...
€223.26Restart pressure (bar) 2 bars Line current 16 A Motor phase current 16 A Attack size 1 " Type of attack male Female