4BLOCKm 6/10 (20m) - 1.5 HP single-phase submersible pump
Flow rate up to 150 l / min (9 m³ / h). Head up to 63 m. 1.1 Kw (1.5 HP) engine. 20 meters of cable.
Buy it now and receive it between tomorrow and 18-11-2024 with SDA - 2 giorni Italia
Monobloc submersible electric pump in stainless steel ready to install.
It is complete with: condenser, built-in thermal overload protector and 20 meter power cable.
The PEDROLLO 4BLOCKm 6/10 has a flow rate that varies from 25 to 150 liters per minute with a prevalence from 20.5 to 63 meters.
It is recommended for supplying clean water from wells even in the presence of sand (up to 150 g / m³).
Due to its high performance and reliability it is recommended for use in the domestic sector, for the automatic distribution of water in conjunction with autoclaves, for irrigation, etc.
- Motor connection
- SINGLE PHASE
- Motor power (HP)
- 1.5
- Absorption at 230V (A)
- 8
- Capacitor
- 35 µF450 VL
- Delivery port
- 1 "1/4
- Body Pump
- AISI 304 stainless steel
- Impeller
- Delrin
- Number of impellers
- 10
- Pump shaft
- AISI 304 stainless steel
- Check valve
- no
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 25
- Max flow (l./min.)
- 150
- Min head (m.)
- 20.5
- Max head (m.)
- 63
- Cable length (m)
- 20
- Employments
- water supply, pressurization systems, irrigation
- Liquid temperature max. (° C)
- 35
- Height (cm)
- 88.7
- Outside diameter (cm)
- 10
- Weight kg)
- 16.5
- Guarantee
- 2
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6203 |
| Opposite side engine bearing | 6203 |
Tree holding
| Type of seal | Single Mechanical Seal in oil chamber |
| Engine side model | ST1-16 |
| LM diameter | 16 |
| LM fixed ring | Ceramic |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
Materials
| 1.3 - Delivery body | Stainless steel EN 1.4301 (AISI 304) |
| 2.1 - Seal holder cover | Brass CW617N EN 12165 |
| 3.0 - Impeller | POM acetal resin |
| 4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
| 4.1 - Crankshaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.0 - Stadium box | Stainless steel EN 1.4301 (AISI 304) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 6.2 - Engine sleeve | Stainless steel EN 1.4301 (AISI 304) |
| 7.0 - Lantern | Reinforced technopolymer |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
| 7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
 4BLOCKm 6/10 (20m) - 1.5 HP single-phase submersible pumpThis product Flow rate up to 150 l / min (9 m³ / h). Head up to 63 m. 1.1 Kw (1.5 HP) engine. 20 meters of cable. |  4BLOCKm 6/7 (20m) - 1 HP single-phase submersible pumpFlow rate up to 150 l / min (9 m³ / h). Head up to 44 m. 0.75 Kw (1 HP) motor. 20 meters of cable. |  4BLOCKm 8/3 (20m) - 0.75 HP single-phase submersible pumpFlow rate up to 200 l / min (12 m³ / h). Head up to 20 m. 0.55 Kw (0.75 HP) motor. 20 meters of cable |  4BLOCKm 8/5 (20m) - 1 HP single-phase submersible pumpFlow rate up to 200 l / min (12 m³ / h). Head up to 33.5 m. 0.75 Kw (1 HP) motor. 20 meters of cable | |
|---|---|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Motor power (HP) | Motor power (HP) 1.5 | Motor power (HP) 1 | Motor power (HP) 0.75 | Motor power (HP) 1 |
| Absorption at 230V (A) | Absorption at 230V (A) 8 | Absorption at 230V (A) 6 | Absorption at 230V (A) 4 | Absorption at 230V (A) 6.0 |
| Capacitor | Capacitor 35 µF450 VL | Capacitor 31.5 µF450 VL | Capacitor 20 µF450 VL | Capacitor 35 µF450 VL |
| Delivery port | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/4 | Delivery port 1 "1/4 |
| Body Pump | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel | Body Pump AISI 304 stainless steel |
| Impeller | Impeller Delrin | Impeller Delrin | Impeller Delrin | Impeller Delrin |
| Number of impellers | Number of impellers 10 | Number of impellers 7 | Number of impellers 3 | Number of impellers 5 |
| Pump shaft | Pump shaft AISI 304 stainless steel | Pump shaft AISI 304 stainless steel | Pump shaft AISI 304 stainless steel | Pump shaft -- |
| Check valve | Check valve no | Check valve no | Check valve no | Check valve no |
| Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
| Flow rate min. (l./min.) | Flow rate min. (l./min.) 25 | Flow rate min. (l./min.) 25 | Flow rate min. (l./min.) 40 | Flow rate min. (l./min.) 40 |
| Max flow (l./min.) | Max flow (l./min.) 150 | Max flow (l./min.) 150 | Max flow (l./min.) 200 | Max flow (l./min.) 200 |
| Min head (m.) | Min head (m.) 20.5 | Min head (m.) 14.5 | Min head (m.) 4 | Min head (m.) 7 |
| Max head (m.) | Max head (m.) 63 | Max head (m.) 44 | Max head (m.) 21 | Max head (m.) 33.5 |
| Cable length (m) | Cable length (m) 20 | Cable length (m) 20 | Cable length (m) 20 | Cable length (m) 20 |
| Employments | Employments water supply, pressurization systems, irrigation | Employments water supply, pressurization systems, irrigation | Employments water supply, pressurization systems, irrigation | Employments water supply, pressurization systems, irrigation |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) 35 | Liquid temperature max. (° C) 35 | Liquid temperature max. (° C) +35°C | Liquid temperature max. (° C) 35 |
| Height (cm) | Height (cm) 88.7 | Height (cm) 72.5 | Height (cm) 57.2 | Height (cm) 66.5 |
| Outside diameter (cm) | Outside diameter (cm) 10 | Outside diameter (cm) 10 | Outside diameter (cm) 10 | Outside diameter (cm) 10 |
| Weight kg) | Weight kg) 16.5 | Weight kg) 13.3 | Weight kg) 10.6 | Weight kg) 13.8 |
| Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |
Related Products
-
Brio Top 2.0 - Electronic...
For pumps up to 3 HP. With 1" male connection. With pressure gauge. With auto reset.
€105.69Restart pressure (bar) from 0.5 to 8 bar Line current 16 A Motor phase current 16 A Attack size 1 " Type of attack male -
PRESFLO MULTI - Electronic...
For pumps up to 2 HP. Inlet port 1" M. Outlet port 1" F . Without pressure gauge. With...
€223.26Restart pressure (bar) 2 bars Line current 16 A Motor phase current 16 A Attack size 1 " Type of attack male Female