4BLOCKm 2/10 (20m) - 0.75 HP single-phase submersible electric pump
Flow rate up to 60 l/min (3.6 m³/h). Head up to 78 m. 0.55 Kw (0.75 HP) motor. 20 meters of cable.
Delivery Options
| Carrier | Description | Estimated Delivery | |
|---|---|---|---|
 | Mail Boxes - 2 giorni | This courier delivers within 48 hours from the moment we entrust the products to him. | Thursday 29 May - Friday 30 May |
 | Poste Italiane - 2 giorni Italia | This courier delivers within 24/48 hours from the moment we entrust them with the products. | Thursday 29 May - Friday 30 May |
 | DHL - 2 giorni Italia | This courier delivers within 24/48 hours from the moment we entrust the products to him. | Thursday 29 May - Friday 30 May |
 | Punto di ritiro | Choose where to collect your order in 24/48 hours. | Thursday 29 May |
Carrier: Mail Boxes - 2 giorni
Description: This courier delivers within 48 hours from the moment we entrust the products to him.
Estimated delivery:
Thursday 29 May - Friday 30 May
Carrier: Poste Italiane - 2 giorni Italia
Description: This courier delivers within 24/48 hours from the moment we entrust them with the products.
Estimated delivery:
Thursday 29 May - Friday 30 May
Carrier: DHL - 2 giorni Italia
Description: This courier delivers within 24/48 hours from the moment we entrust the products to him.
Estimated delivery:
Thursday 29 May - Friday 30 May
Carrier: Punto di ritiro
Description: Choose where to collect your order in 24/48 hours.
Estimated delivery:
Thursday 29 May
Monobloc submersible electric pump in stainless steel ready to install. It is complete with: capacitor, built-in thermal motor protector and 20 meter power cable.
The PEDROLLO 4BLOCKm 2/9 has a flow rate that varies from 10 to 60 litres per minute with a head from 29.5 to 78 metres.
It is recommended for supplying clean water from wells even in the presence of sand up to 150 grams per cubic meter.
Due to its high performance and reliability, it is recommended for use in the domestic sector, for the automatic distribution of water in conjunction with pressure tanks, for irrigation, etc.
- Motor connection
- SINGLE PHASE
- Power (Kw)
- 0.55
- Power (HP)
- 0.75
- Absorption at 230V (A)
- 4.0
- Capacitor
- 20 µF450 VL
- Delivery mouth
- 1 "1/4
- Pump body
- AISI 304 stainless steel
- Impeller
- Delrin
- Number of impellers
- 9
- Pump shaft
- AISI 304 stainless steel
- Check valve
- Yes
- Degree of protection
- IP 68
- Min. flow rate (l./min.)
- 10
- Max. flow rate (l./min.)
- 60
- Min. head (m.)
- 29.5
- Max. head (m.)
- 78
- Cable length (m)
- 20
- Jobs
- water supply, pressurization systems, irrigation
- Max. liquid temperature (°C)
- 35
- Height (cm)
- 65.7
- External diameter (cm)
- 10
- Weight (Kg)
- 12.4
- Warranty (years)
- 2
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6203 |
| Opposite side engine bearing | 6203 |
Tree holding
| Type of seal | Single Mechanical Seal in oil chamber |
| Engine side model | ST1-16 |
| LM diameter | 16 |
| LM fixed ring | Ceramic |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
Materials
| 1.3 - Delivery body | Stainless steel EN 1.4301 (AISI 304) |
| 2.1 - Seal holder cover | Brass CW617N EN 12165 |
| 3.0 - Impeller | POM acetal resin |
| 4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
| 4.1 - Crankshaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.0 - Stadium box | Stainless steel EN 1.4301 (AISI 304) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 6.2 - Engine sleeve | Stainless steel EN 1.4301 (AISI 304) |
| 7.0 - Lantern | Reinforced technopolymer |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
| 7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
 4BLOCKm 2/10 (20m) - 0.75 HP single-phase submersible electric pumpThis product Flow rate up to 60 l/min (3.6 m³/h). Head up to 78 m. 0.55 Kw (0.75 HP) motor. 20 meters of cable. |  BCm 10/50-MF - 1 HP single-phase DOUBLE-CHANNEL electric pump for waste waterFlow rate up to 600 l/min (36 m³/h). Head up to 12 m. 0.75 Kw (1 HP) motor. | |
|---|---|---|
| Motor connection | Motor connection SINGLE PHASE | Motor connection SINGLE PHASE |
| Power (Kw) | Power (Kw) 0.55 | Power (Kw) 0.75 |
| Power (HP) | Power (HP) 0.75 | Power (HP) 1 |
| Absorption at 230V (A) | Absorption at 230V (A) 4.0 | Absorption at 230V (A) 5 |
| Capacitor | Capacitor 20 µF450 VL | Capacitor 20 µF450 VL |
| Delivery mouth | Delivery mouth 1 "1/4 | Delivery mouth 2" |
| Pump body | Pump body AISI 304 stainless steel | Pump body AISI 304 stainless steel |
| Impeller | Impeller Delrin | Impeller AISI 304 stainless steel |
| Number of impellers | Number of impellers 9 | Number of impellers 1 |
| Crankshaft | Crankshaft -- | Crankshaft AISI 304 stainless steel |
| Pump shaft | Pump shaft AISI 304 stainless steel | Pump shaft -- |
| Check valve | Check valve Yes | Check valve No |
| Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 |
| Min. flow rate (l./min.) | Min. flow rate (l./min.) 10 | Min. flow rate (l./min.) 50 |
| Max. flow rate (l./min.) | Max. flow rate (l./min.) 60 | Max. flow rate (l./min.) 600 |
| Min. head (m.) | Min. head (m.) 29.5 | Min. head (m.) 2 |
| Max. head (m.) | Max. head (m.) 78 | Max. head (m.) 12 |
| Cable length (m) | Cable length (m) 20 | Cable length (m) 10 |
| Jobs | Jobs water supply, pressurization systems, irrigation | Jobs drainage, drying up, slightly dirty waters |
| Max. liquid temperature (°C) | Max. liquid temperature (°C) 35 | Max. liquid temperature (°C) 40 |
| Height (cm) | Height (cm) 65.7 | Height (cm) 43.2 |
| External diameter (cm) | External diameter (cm) 10 | External diameter (cm) -- |
| Weight (Kg) | Weight (Kg) 12.4 | Weight (Kg) 14.5 |
| Warranty (years) | Warranty (years) 2 | Warranty (years) 2 |
