TOP 2 - VORTEX/GM (10m) - 0.50 HP electric drainage pump for dirty water
Flow rate up to 155 l/min (10.8 m³/h). Head up to 7.6 m. 0.37 kW (0.5 HP) motor. 10-meter cable with Schuko plug.
Delivery Options
| Carrier | Description | Estimated Delivery | |
|---|---|---|---|
 | Mail Boxes - 2 giorni | This courier delivers within 48 hours from the moment we entrust the products to him. | Thursday 22 October - Friday 23 October |
 | Poste Italiane - 2 giorni Italia | This courier delivers within 24/48 hours from the moment we entrust them with the products. | Thursday 22 October - Friday 23 October |
 | Poste Italiane - 3 giorni punto di ritiro | This courier delivers within 24/72 hours from the moment we entrust them with the products. | Thursday 22 October |
Carrier: Mail Boxes - 2 giorni
Description: This courier delivers within 48 hours from the moment we entrust the products to him.
Estimated delivery:
Thursday 22 October - Friday 23 October
Carrier: Poste Italiane - 2 giorni Italia
Description: This courier delivers within 24/48 hours from the moment we entrust them with the products.
Estimated delivery:
Thursday 22 October - Friday 23 October
Carrier: Poste Italiane - 3 giorni punto di ritiro
Description: This courier delivers within 24/72 hours from the moment we entrust them with the products.
Estimated delivery:
Thursday 22 October
The TOP 2 - VORTEX submersible electric pump from the TOP-VORTEX series by Pedrollo is recommended for domestic installations.
Suitable for evacuating waste water, emptying tanks, domestic drains, emptying collection pits even in the presence of suspended solids up to 25 millimetres in diameter.
The construction solutions used by Pedrollo for the TOP 2 - VORTEX guarantee ease of use and operational safety thanks to the total cooling of the motor and the double seal on the shaft.
The vertical sliding magnetic float makes it ideal for small wells.
It can be installed up to 3 meters below the water level.
The electric pump is complete with a 5-meter power cable and a float switch.
- Jobs
- drainage, drying up
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 0.37
- Power (HP)
- 0.50
- Absorption at 230V (A)
- 2
- Capacitor
- 10 µF 450 VL
- Pump body
- Technopolymer
- Impeller
- Technopolymer
- Number of impellers
- 1
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Minimum flow rate (l./min.)
- 20
- Max. flow rate (l./min.)
- 155
- Min. head (m.)
- 2
- Max. head (m.)
- 7.6
- Max. liquid temperature (°C)
- +40°C
- Cable length (m.)
- 10
- Degree of protection
- IP 68
- Delivery mouth
- 1" 1/4
- Height (cm)
- 20
- Width (cm)
- 15.2
- Weight (Kg)
- 5.3
- Warranty (years)
- 2
Use and formulation of products
- Jobs
- drainage, drying up
Engine and mechanical performance
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 0.37
- Power (HP)
- 0.50
- Absorption at 230V (A)
- 2
- Capacitor
- 10 µF 450 VL
Pump components and construction
- Pump body
- Technopolymer
- Impeller
- Technopolymer
- Number of impellers
- 1
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
Hydraulic performance and filtration
- Minimum flow rate (l./min.)
- 20
- Max. flow rate (l./min.)
- 155
- Min. head (m.)
- 2
- Max. head (m.)
- 7.6
Liquids and pumping conditions
- Max. liquid temperature (°C)
- +40°C
Power supply and electrical parameters
- Cable length (m.)
- 10
Safety and protection
- Degree of protection
- IP 68
Installation and connections
- Delivery mouth
- 1" 1/4
Dimensions and weight
- Height (cm)
- 20
- Width (cm)
- 15.2
- Weight (Kg)
- 5.3
Packaging, maintenance, and warranty
- Warranty (years)
- 2
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearings
| Pump side motor bearing | 6201 ZZ |
| Opposite side engine bearing | 6201 ZZ |
Tree holding
| Type of seal | Double Seal: Mechanical and Lip with oil chamber |
| Engine side model | Lip seal |
| LM diameter | 12 |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | STA-12R |
| LP diameter | 12 |
| LP fixed ring | Ceramic |
| LP rotating ring | Graphite |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Reinforced technopolymer |
| 2.2 - Suction cover | Reinforced technopolymer |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Reinforced technopolymer |
Reviews (1) - Review moderation
Une pompe efficace, compacte, robuste et très bien conçue. Apparemment ce qui se fait de mieux dans cette catégorie.
Compare with Similar Products
 TOP 2 - VORTEX/GM (10m) - 0.50 HP electric drainage pump for dirty waterThis product Flow rate up to 155 l/min (10.8 m³/h). Head up to 7.6 m. 0.37 kW (0.5 HP) motor. 10-meter cable with Schuko plug. |  TOP 1 - VORTEX/GM (10m) - 0.33 HP electric drainage pump for dirty water Flow rate up to 140 l/min (8.4 m³/h). Head up to 7 m. 0.25 Kw (0.33 HP) motor. 10 meters of cable with shuko plug. |  TOP 3 - VORTEX/GM (10m) - 0.75 HP electric drainage pump for dirty water Flow rate up to 170 l/min (10.8 m³/h). Head up to 8.7 m. 0.55 kW (0.75 HP) motor. 10-meter cable with Schuko plug. WITH MAGNETIC FLOAT. | |
|---|---|---|---|
| Price | Price €297.68 -42% €172.65 | Price €292.80 -42% €169.82 | Price €333.06 -42% €193.17 |
| Jobs | Jobs drainage, drying up | Jobs drainage, drying up, slightly dirty waters | Jobs drainage, drying up |
| Motor connection | Motor connection SINGLE-PHASE | Motor connection SINGLE-PHASE | Motor connection SINGLE-PHASE |
| Power (Kw) | Power (Kw) 0.37 | Power (Kw) 0.25 | Power (Kw) -- |
| Power (HP) | Power (HP) 0.50 | Power (HP) 0.33 | Power (HP) 0.75 |
| Absorption at 230V (A) | Absorption at 230V (A) 2 | Absorption at 230V (A) 1.5 | Absorption at 230V (A) 2.9 |
| Capacitor | Capacitor 10 µF 450 VL | Capacitor -- | Capacitor 14 µF 450 VL |
| Pump body | Pump body Technopolymer | Pump body Technopolymer | Pump body Technopolymer |
| Impeller | Impeller Technopolymer | Impeller Technopolymer | Impeller Technopolymer |
| Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
| Crankshaft | Crankshaft Stainless steel EN 10088-3 1.4104 | Crankshaft AISI 431 stainless steel | Crankshaft Stainless steel EN 10088-3 1.4104 |
| Check valve | Check valve No | Check valve No | Check valve No |
| Minimum flow rate (l./min.) | Minimum flow rate (l./min.) 20 | Minimum flow rate (l./min.) 20 | Minimum flow rate (l./min.) 20 |
| Max. flow rate (l./min.) | Max. flow rate (l./min.) 155 | Max. flow rate (l./min.) 140 | Max. flow rate (l./min.) 170 |
| Min. head (m.) | Min. head (m.) 2 | Min. head (m.) 1.6 | Min. head (m.) 2.8 |
| Max. head (m.) | Max. head (m.) 7.6 | Max. head (m.) 7 | Max. head (m.) 8.7 |
| Max. liquid temperature (°C) | Max. liquid temperature (°C) +40°C | Max. liquid temperature (°C) +40°C | Max. liquid temperature (°C) +40°C |
| Cable length (m.) | Cable length (m.) 10 | Cable length (m.) 10 | Cable length (m.) 10 |
| Degree of protection | Degree of protection IP 68 | Degree of protection IP 68 | Degree of protection IP 68 |
| Delivery mouth | Delivery mouth 1" 1/4 | Delivery mouth 1" 1/4 | Delivery mouth 1" 1/4 |
| Height (cm) | Height (cm) 20 | Height (cm) 31.8 | Height (cm) 20 |
| Width (cm) | Width (cm) 15.2 | Width (cm) 20.0 | Width (cm) 15.2 |
| Depth (cm) | Depth (cm) -- | Depth (cm) 20.0 | Depth (cm) -- |
| Weight (Kg) | Weight (Kg) 5.3 | Weight (Kg) 6.9 | Weight (Kg) 6.7 |
| Warranty (years) | Warranty (years) 2 | Warranty (years) 2 | Warranty (years) 2 |