TOP MULTI-EVOTECH 5 - 1 HP multi-impeller electric pump with press control
Flow rate up to 120 l/min (4.8 m³/h). Head up to 41 m. 0.75 Kw (1 HP) motor.
With integrated electronic device that allows you to start or stop the electric pump automatically by opening or closing the tap.
The TOP MULTI-EVOTECH 5 multi-impeller electric pump by Pedrollo is suitable for domestic water supply from relatively deep basins, tanks or wells, for taking rainwater from cisterns for hand watering or to feed an irrigation system.
Recommended for domestic and civil use. It allows pumping clean water and chemically non-aggressive liquids for the materials the pump is made of.
A unique feature of the TOP MULTI-EVOTECH 5 is the electrical device it is equipped with. It allows the pump to be started following a drop in system pressure below 1.5 bar and stops it when the flow drops below 3 liters per minute.
The automatic start and stop protects the pump from dry running and blocking, in fact after 48 hours of inactivity it starts the pump for 10 seconds.
The flow rate ranges from 10 to 120 liters per minute. The head ranges from 6 to 41 meters.
It must be powered by a single-phase voltage, has a horsepower of 1 HP and the temperature of the liquid to be pumped ranges from -10 degrees centigrade up to +40.
- Motor connection
- SINGLE PHASE
- Power (Kw)
- 0.75
- Power (HP)
- 1
- Absorption at 230V (A)
- 3.6
- Delivery port
- 1 "1/4
- Body Pump
- Technopolymer
- Impeller
- Noryl
- Number of impellers
- 5
- Motor shaft
- AISI 431 stainless steel
- Check valve
- Yes
- Degree of protection
- IP 68
- Flow rate min. (l./min.)
- 10
- Max flow (l./min.)
- 120
- Min head (m.)
- 4
- Max head (m.)
- 33
- Emptying level (mm)
- 35
- Cable length (m)
- 10
- Employments
- water supply, pressurization systems, irrigation
- Liquid temperature max. (° C)
- 40
- Height (cm)
- 44.2
- Width (cm)
- 23.9
- Depth (cm)
- Weight kg)
- 9.9
- Guarantee
- 2
|
|
|
|
|
Bearings
Pump side motor bearing | 6202 ZZ - C3 |
Opposite side engine bearing | 6201 ZZ |
Tree holding
Type of seal | Double Mechanical Seal in tandem with oil chamber |
Engine side model | STA-13R |
LM diameter | 13 |
LM fixed ring | Ceramic |
LM rotating ring | Graphite |
LM elastomer | NBR |
Shrinkage DN1=450 DN2=350 | STA-12R SG |
LP diameter | 12 |
LP fixed ring | Silicon carbide |
LP rotating ring | Graphite |
LP elastomer | NBR |
Materials
1.0 - Pump body | Reinforced technopolymer |
1.1 - Suction Body | Reinforced technopolymer |
1.3 - Delivery body | Reinforced technopolymer |
1.4 - Basic | Reinforced technopolymer |
3.0 - Impeller | Reinforced technopolymer |
4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
5.0 - Stadium box | Reinforced technopolymer |
5.1 - Diffuser | Reinforced technopolymer |
5.2 - Wear ring | POM acetal resin |
5.5 - Director Crown | Reinforced technopolymer |
6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
Compare with Similar Products
TOP MULTI-EVOTECH 5 - 1 HP multi-impeller electric pump with press controlThis product Flow rate up to 120 l/min (4.8 m³/h). Head up to 41 m. 0.75 Kw (1 HP) motor. With integrated electronic device that allows you to start or stop the electric pump automatically by opening or closing the tap. | HT 3/8 - 3 HP three-phase vertical multistage electric pumpFlow rate up to 90 l/min (5.4 m³/h). Head up to 65 m. Motor 2.2 Kw (3 HP). | HT 3/9 - 4 HP three-phase vertical multistage electric pumpFlow rate up to 90 l/min (5.4 m³/h). Head up to 146 m. 3 Kw (4 HP) motor. | TOP MULTI-EVOTECH 4 - Multi-impeller electric pump with 1 HP press controlFlow rate up to 80 l/min (4.8 m³/h). Head up to 52 m. 0.75 Kw (1 HP) motor. With integrated electronic device that allows you to start or stop the electric pump automatically by opening or closing the tap. | |
---|---|---|---|---|
Motor connection | Motor connection SINGLE PHASE | Motor connection THREE-PHASE | Motor connection THREE-PHASE | Motor connection SINGLE PHASE |
Power (Kw) | Power (Kw) 0.75 | Power (Kw) 2.2 | Power (Kw) 3 | Power (Kw) 0.75 |
Power (HP) | Power (HP) 1 | Power (HP) 3 | Power (HP) 4 | Power (HP) 1 |
Absorption at 230V (A) | Absorption at 230V (A) 3.6 | Absorption at 230V (A) -- | Absorption at 230V (A) -- | Absorption at 230V (A) 3.6 |
Suction mouth | Suction mouth -- | Suction mouth 1 " | Suction mouth 1 " | Suction mouth -- |
Delivery port | Delivery port 1 "1/4 | Delivery port 1 " | Delivery port 1 " | Delivery port 1 "1/4 |
Body Pump | Body Pump Technopolymer | Body Pump Cast iron | Body Pump Cast iron | Body Pump Technopolymer |
Impeller | Impeller Noryl | Impeller AISI 304 stainless steel | Impeller AISI 304 stainless steel | Impeller Noryl |
Number of impellers | Number of impellers 5 | Number of impellers 8 | Number of impellers 9 | Number of impellers 3 |
Motor shaft | Motor shaft AISI 431 stainless steel | Motor shaft -- | Motor shaft -- | Motor shaft AISI 431 stainless steel |
Check valve | Check valve Yes | Check valve no | Check valve no | Check valve Yes |
Degree of protection | Degree of protection IP 68 | Degree of protection -- | Degree of protection -- | Degree of protection IP 68 |
Flow rate min. (l./min.) | Flow rate min. (l./min.) 10 | Flow rate min. (l./min.) 10 | Flow rate min. (l./min.) 10 | Flow rate min. (l./min.) 10 |
Max flow (l./min.) | Max flow (l./min.) 120 | Max flow (l./min.) 80 | Max flow (l./min.) 80 | Max flow (l./min.) 120 |
Min head (m.) | Min head (m.) 4 | Min head (m.) 28 | Min head (m.) 28 | Min head (m.) 4 |
Max head (m.) | Max head (m.) 33 | Max head (m.) 52 | Max head (m.) 52 | Max head (m.) 33 |
Emptying level (mm) | Emptying level (mm) 35 | Emptying level (mm) -- | Emptying level (mm) -- | Emptying level (mm) 35 |
Cable length (m) | Cable length (m) 10 | Cable length (m) -- | Cable length (m) -- | Cable length (m) 10 |
Employments | Employments water supply, pressurization systems, irrigation | Employments fire prevention systems, washing systems, irrigation, pressurization systems, water supply | Employments fire prevention systems, washing systems, irrigation, pressurization systems, water supply | Employments water supply, pressurization systems, irrigation |
Liquid temperature max. (° C) | Liquid temperature max. (° C) 40 | Liquid temperature max. (° C) -- | Liquid temperature max. (° C) -- | Liquid temperature max. (° C) 40 |
Height (cm) | Height (cm) 44.2 | Height (cm) -- | Height (cm) -- | Height (cm) 44.2 |
Width (cm) | Width (cm) 23.9 | Width (cm) -- | Width (cm) -- | Width (cm) 23.9 |
Depth (cm) | Depth (cm) -- | Depth (cm) -- | Depth (cm) -- | Depth (cm) -- |
Weight kg) | Weight kg) 9.9 | Weight kg) -- | Weight kg) -- | Weight kg) 9.9 |
Guarantee | Guarantee 2 | Guarantee 2 | Guarantee 2 | Guarantee 2 |