chevron_left chevron_right
-42%
VXCm 30/65 - 3 HP single-phase VORTEX electric pump for waste water
Flow rate up to 1200 l/min (72 m³/h). Head up to 9.7 m. 2.2 Kw (3 HP) motor.
Telephone support for information before purchasing.
After-sales assistance for product installation.
Description
The VXC series pumps, built in cast iron of considerable thickness, exceptional strength and resistance to abrasion and durability over time, are equipped with a VORTEX type impeller.
They are suitable for draining dirty, sewage, waste water, water mixed with mud, revived and putrid sludge.
Suitable for installation in sewers, tunnels, excavations, canals, underground car parks, etc.
Data sheet
- Motor connection
- SINGLE PHASE
- Power (HP)
- 3
- Max flow (l./min.)
- 1200
- Max head (m.)
- 9.7
- Liquid temperature max. (° C)
- +40°C
- Weight kg)
- 44
Models and performances VXCm 50-65
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the VXC 50 - 65 series
Bearings
| Pump side motor bearing | 6305 CM D 6 |
| Opposite side engine bearing | 6204 ZZ-C3 |
Tree holding
| Type of seal | Double Mechanical Seal in tandem with oil chamber |
| Engine side model | STA-22 |
| LM diameter | 22 |
| LM fixed ring | Ceramic |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | STA-20 |
| LP diameter | 20 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Cast iron GJL 200 EN 1561 |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | Cast iron GJL 200 EN 1561 |
| 6.1 - Engine cover | Cast iron GJL 200 EN 1561 |
Compare with Similar Products
 VXCm 30/65 - 3 HP single-phase VORTEX electric pump for waste waterThis product Flow rate up to 1200 l/min (72 m³/h). Head up to 9.7 m. 2.2 Kw (3 HP) motor. |  Zeotech Gold - Fertilizer for the lawn of 25 KgSpring greening fertilizer for lawns. Long service life with iron and nitrogen. |  START LIFE 10-15-10 + 2Mg0 + 0,5 Fe + Mn + Zn fertilizer of 20 KgFor sowing or overseeding operations. |  Zeotech N - Fertilizer for the lawn of 25 KgGreening and maintenance fertilizer with iron. Long lasting with zeolite and humic acids. | |
|---|---|---|---|---|
| Nitrogen (N) | Nitrogen (N) -- | Nitrogen (N) 14 | Nitrogen (N) 20% | Nitrogen (N) 12 |
| Phosphorus pentoxide (P) | Phosphorus pentoxide (P) -- | Phosphorus pentoxide (P) -- | Phosphorus pentoxide (P) 15% | Phosphorus pentoxide (P) 5 |
| Potassium oxide (K) | Potassium oxide (K) -- | Potassium oxide (K) 8 | Potassium oxide (K) 10% | Potassium oxide (K) 8 |
| Period of use | Period of use -- | Period of use Summer end, Spring, All the year | Period of use All the year | Period of use Spring, Summer end |
| Action | Action -- | Action Greening, strengthening | Action Starter | Action Greening |
| Dosage | Dosage -- | Dosage 35-45 g / m2 | Dosage 25-30 g / m2 | Dosage 35-45 g / m2 |
| Motor connection | Motor connection SINGLE PHASE | Motor connection -- | Motor connection -- | Motor connection -- |
| Power (HP) | Power (HP) 3 | Power (HP) -- | Power (HP) -- | Power (HP) -- |
| Max flow (l./min.) | Max flow (l./min.) 1200 | Max flow (l./min.) -- | Max flow (l./min.) -- | Max flow (l./min.) -- |
| Max head (m.) | Max head (m.) 9.7 | Max head (m.) -- | Max head (m.) -- | Max head (m.) -- |
| Liquid temperature max. (° C) | Liquid temperature max. (° C) +40°C | Liquid temperature max. (° C) -- | Liquid temperature max. (° C) -- | Liquid temperature max. (° C) -- |
| Typology | Typology -- | Typology Universal | Typology Overseed | Typology Universal, Dye |
| Consistency | Consistency -- | Consistency granular | Consistency granular | Consistency granular |
| Release | Release -- | Release scheduled | Release scheduled | Release scheduled |
| Weight kg) | Weight kg) 44 | Weight kg) 25 | Weight kg) 20 | Weight kg) 25 |
