HFm 70C - 1.5 HP single-phase centrifugal electric pump
Flow rate up to 300 l/min (18 m³/h). Head up to 29 m. 1.1 kW (1.5 HP) motor.




The Pedrollo HFm 70C centrifugal electric pump is suitable for those seeking reliability during long work sessions.
Suitable for surface and sprinkler irrigation, for drawing water from lakes, rivers and wells.
Recommended for use in the agricultural and industrial sectors.
The HFm 70C is suitable for those looking for high flow rates at the expense of low head values.
The flow rate ranges from 50 to 300 litres per minute while the head ranges from 15 to 29 metres.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 1.1
- Power (HP)
- 1.5
- Absorption at 230V (A)
- 8
- Capacitor
- 25 µF 450 VL
- Suction mouth
- 1" 1/2
- Delivery mouth
- 1" 1/2
- Pump body
- Cast iron
- Impeller
- Brass
- Number of impellers
- 1
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 50
- Max. flow rate (l./min.)
- 300
- Min. head (m.)
- 15
- Max. head (m.)
- 29
- Jobs
- water supply, irrigation, cooling systems, tank transfer
- Max. liquid temperature (°C)
- +90°C
- Motor voltage
- 230 V
- Height (cm)
- 26.9
- Width (cm)
- 37.3
- Depth (cm)
- 21.6
- Weight (Kg)
- 1.8
- Warranty (years)
- 2
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

Bearings
| Pump side motor bearing | 6204 ZZ |
| Opposite side motor bearing | 6204 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-18 |
| LP diameter | 18 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
Compare with Similar Products
![]() HFm 70C - 1.5 HP single-phase centrifugal electric pumpThis product Flow rate up to 300 l/min (18 m³/h). Head up to 29 m. 1.1 kW (1.5 HP) motor. | ![]() HFm 51A - Single-phase centrifugal electric pump 1 HPFlow rate up to 300 l/min (18 m³/h). Head up to 21.2 m. 0.75 Kw (1 HP) motor. | ![]() HFm 70B - 2 HP single-phase centrifugal electric pumpFlow rate up to 300 l/min (18 m³/h). Head up to 33 m. 1.5 kW (2 HP) motor. | ![]() HFm 5B - 1 HP single-phase centrifugal electric pumpFlow rate up to 500 l/min (30 m³/h). Head up to 13.7 m. 0.75 Kw (1 HP) motor. | |
|---|---|---|---|---|
| Price | Price €542.90 -42% €314.88 | Price €334.28 -42% €193.88 | Price €570.96 -42% €331.16 | Price €351.36 -42% €203.79 |
| Motor connection | Motor connection SINGLE-PHASE | Motor connection SINGLE-PHASE | Motor connection SINGLE-PHASE | Motor connection SINGLE-PHASE |
| Power (Kw) | Power (Kw) 1.1 | Power (Kw) 0.75 | Power (Kw) 1.5 | Power (Kw) 0.75 |
| Power (HP) | Power (HP) 1.5 | Power (HP) 1 | Power (HP) 2 | Power (HP) 1 |
| Absorption at 230V (A) | Absorption at 230V (A) 8 | Absorption at 230V (A) 5.6 | Absorption at 230V (A) 10 | Absorption at 230V (A) 4.9 |
| Capacitor | Capacitor 25 µF 450 VL | Capacitor 20 µF 450 VL | Capacitor 45 µF 450 VL | Capacitor 20 µF 450 VL |
| Suction mouth | Suction mouth 1" 1/2 | Suction mouth 1" 1/2 | Suction mouth 1" 1/2 | Suction mouth 2" |
| Delivery mouth | Delivery mouth 1" 1/2 | Delivery mouth 1" 1/2 | Delivery mouth 1" 1/2 | Delivery mouth 2" |
| Pump body | Pump body Cast iron | Pump body Cast iron | Pump body Cast iron | Pump body Cast iron |
| Impeller | Impeller Brass | Impeller Brass | Impeller Brass | Impeller Brass |
| Number of impellers | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 | Number of impellers 1 |
| Crankshaft | Crankshaft Stainless steel EN 10088-3 1.4104 | Crankshaft AISI 431 stainless steel | Crankshaft Stainless steel EN 10088-3 1.4104 | Crankshaft AISI 431 stainless steel |
| Check valve | Check valve No | Check valve No | Check valve No | Check valve No |
| Degree of protection | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 | Degree of protection IP 44 |
| Minimum flow rate (l./min.) | Minimum flow rate (l./min.) 50 | Minimum flow rate (l./min.) 50 | Minimum flow rate (l./min.) 50 | Minimum flow rate (l./min.) 100 |
| Max. flow rate (l./min.) | Max. flow rate (l./min.) 300 | Max. flow rate (l./min.) 300 | Max. flow rate (l./min.) 300 | Max. flow rate (l./min.) 500 |
| Min. head (m.) | Min. head (m.) 15 | Min. head (m.) 8.4 | Min. head (m.) 19 | Min. head (m.) 5 |
| Max. head (m.) | Max. head (m.) 29 | Max. head (m.) 21.2 | Max. head (m.) 33 | Max. head (m.) 13.7 |
| Jobs | Jobs water supply, irrigation, cooling systems, tank transfer | Jobs water supply, irrigation, cooling systems, tank transfer | Jobs water supply, irrigation, cooling systems, tank transfer | Jobs water supply, irrigation, cooling systems, tank transfer |
| Max. liquid temperature (°C) | Max. liquid temperature (°C) +90°C | Max. liquid temperature (°C) +90°C | Max. liquid temperature (°C) +90°C | Max. liquid temperature (°C) +90°C |
| Motor voltage | Motor voltage 230 V | Motor voltage 230 V | Motor voltage 230 V | Motor voltage 230 V |
| Height (cm) | Height (cm) 26.9 | Height (cm) 22.5 | Height (cm) 26.9 | Height (cm) 23.8 |
| Width (cm) | Width (cm) 37.3 | Width (cm) 30.3 | Width (cm) 37.3 | Width (cm) 31.6 |
| Depth (cm) | Depth (cm) 21.6 | Depth (cm) 19 | Depth (cm) 21.6 | Depth (cm) 19.2 |
| Weight (Kg) | Weight (Kg) 1.8 | Weight (Kg) 13 | Weight (Kg) 21.4 | Weight (Kg) 14.3 |
| Warranty (years) | Warranty (years) 2 | Warranty (years) 2 | Warranty (years) 2 | Warranty (years) 2 |






